THORLABS OCTP Series User Manual page 18

OCTP Series Scanner Chapter 3: Components and Compatibility
3.2.2. Threaded Holes on Metric OCTP Scan Cube Module
Figure 14 Drawing of Threaded Holes in a Metric OCTP Scan Cube Module
3.2.3. Mounting to Thorlabs OCT-STAND
The OCTP ships with a mounting adapter and a dovetail mount, as shown in Figure 15. These accessories
allow the scanner to be mounted to a Thorlabs OCT-STAND which ensures that the objective is directly centered
above the sample plate.
Figure 15 Scanner Mounting Adapter for the OCTP
Page 14 MTN003971-D02