Black Horse Model BH87A Instruction Manual
  1. Manuals
  2. Brands
  3. Black Horse Model Manuals
  4. Toy
  5. BH87A
  6. Instruction manual
Black Horse Model BH87A Instruction Manual

Black Horse Model BH87A Instruction Manual

Focke-wulf fw 190a
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
FOCKE-WULF FW 190A
INCLUDED ELECTRIC RETRACT LANDING GEAR.
WITH OLEO STRUTS.
ALL BALSA - PLY WOOD CONSTRUCTION.
COVERED IN A HEAT-SHRINK FILM WITH PRINTED.
Glow and EP
95% ALMOST READY TO FLY
SPECIFICATION
- Wingspan: 1,780mm (70.08in).
- Length: 1,520mm (59.84in).
- Weight: 5.5 - 6kg (13 lbs).
- Wing area: 51.9dm .
- Wing loading: 115.6g/dm
- Wing type: Naca Airfoil.
- Servo mount: 42mm x 21mm.
- Spinner: 80mm (included).
- Gear type: Eelectric retract gear with oleo
struts for main gear and spring wire
for tail gear (included).
Instruction Manual Book
2
Item code: BH87A.
Parts listing required (not included):
- Radio: 06 channels.
- Servo: 08 standard high torque servos.
- Engine:
20 - 26cc gas.
- Motor:
Brushless outrunner 1700-2300W, 295KV.
- Propeller: Suit with your engine.
Recommended motor
and battery set up (not included):
- Motor:
Admiral GP20 6320-295KV Brushless.
- Lipo cell:
6-10 cells 4,000-5,000mAh.
- ESC:
80A.
- Receiver battery:
6V-7.4V/ 1200-2000mAh.
Made in Vietnam.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BH87A and is the answer not in the manual?

Questions and answers

Related Manuals for Black Horse Model BH87A

Summary of Contents for Black Horse Model BH87A

  • Page 1 Instruction Manual Book Item code: BH87A. FOCKE-WULF FW 190A INCLUDED ELECTRIC RETRACT LANDING GEAR. WITH OLEO STRUTS. ALL BALSA - PLY WOOD CONSTRUCTION. COVERED IN A HEAT-SHRINK FILM WITH PRINTED. Glow and EP 95% ALMOST READY TO FLY SPECIFICATION Parts listing required (not included): - Radio: 06 channels.

  • Page 2: Table Of Contents

    Thank you for purchasing Black Horse Model products. With over 18 years experience in production and fly testing, Black Horse Model is committed to bring the best quality products and good service to customers. Along with a team of creative engineers and skilled workers, we will always accompany with customers by our great experiences, fully enthusiasm...

  • Page 3: Warning

    Please strictly follow the instruction manual to assemble work area thoroughly after working with berglass parts. and use this. In that Black Horse Model has no control over the nal SUGGESTION assembly or material used for nal assembly, Black Horse Model is not responsible for loss of use , or other incidental or consequential damages.

  • Page 4: Adhesives And Required Tools

    Focke - Wulf FW 190A Item code: BH87A ADHESIVES AND REQUIRED TOOLS FLIGHT WARNINGS When ready to y, rst extend the transmitter aerial. Thin CA Switch on the transmitter. 30-minute epoxy Switch on the receiver. 6-minute epoxy Check that the wings are correctly tted to the fuselage.
  • Page 5 Focke - Wulf FW 190A Item code: BH87A • Officially designated AMA Air Show Teams (AST) are authorized to use devices and practices as defined within the Team AMA Program Document. (AMA Document #718.) (j) Not operate a turbine-powered aircraft, unless in compliance with the AMA turbine regulations. (AMA Document #510-A.)

  • Page 6: Tools & Supplies Needed

    Focke - Wulf FW 190A Item code: BH87A PARTS LISTING (NOT INCLUDED) Servo extension leads....2 pcs. 220mm ..2 pcs. Engine: 20 - 26cc Gas. 190mm ..4 pcs. Suit with your engine. Motor: Brushless outrunner 1700-2300W, LiPo. 6S - 10S - 4000-5000mAh.
  • Page 7 Focke - Wulf FW 190A Item code: BH87A 1: Fuselage (1a: Engin mount; 1b: Motor mount). 7: Main gear spare part 12: Rudder spare part. (7a: Controller Box ). 2: Wing 13: Tail gear spare part. 8: Engine spare part.

  • Page 8: Installing The Ailerons And Flaps

    Focke - Wulf FW 190A Item code: BH87A M2 Metal Clevis 4x15mm Socket Head 4mm Spring Washer - - - - - - 1 Spinner 80mm Cap Screw - - - 4 3x8 mm Button - - - 4 Flaslink...

  • Page 9: Installing The Ailerons And Flaps Servos

    Focke - Wulf FW 190A Item code: BH87A INSTALLING THE AILERONS AND FLAPS SERVOS * Install the rubber grommets and brass eyelets on to * Using the thread as a guide and using masking tape, the aileron servos. tape the servo lead to the end of the thread: carefully Using a modeling knife, remove the covering from pull the thread out.

  • Page 10: Installing The Control Horns And Linkages

    Focke - Wulf FW 190A Item code: BH87A INSTALLING THE CONTROL HORNS, LINKAGES 2mm Lock Nut 6x45mm Plastic Screw - - - 4 Push rod - - - 2 - - - 4 Flaslink Ball link Flaslink 2mm Flat washer...
  • Page 11 Focke - Wulf FW 190A Item code: BH87A 5x16mm Flat washer 3mm Flat washer 5x45mm Socket Head Apply threadlocker 3x6mm Button Head Cap Screw Cap Screw 3x16mm Socket Head Cap Screw 3mm Spring Washer 3mm Flat washer Wing Bottom side <R>...

  • Page 12: Installing The Fuselage Servos

    Focke - Wulf FW 190A Item code: BH87A INSTALLING THE FUSELAGE SERVOS Throttle servo Elevator Servo 1) Install the rubber grommets and brass collets into the elevator, rudder and throttle servos. Test fit the servos into the servo tray. Trim the tray if necessary to fit your servos.
  • Page 13 Focke - Wulf FW 190A Item code: BH87A INSTALLING THE ENGINE 4x30mm Socket Head 4mm Spring Washer 4mm Lock Nut Engine Mount Cap Screw - - - 12 - - - 4 - - - 8 - - - 1...

  • Page 14: Installing The Engine, Fuel Tank

    Focke - Wulf FW 190A Item code: BH87A 5. When satisfied with the alignment of the stopper INSTALLING THE FUEL TANK assembly tighten the 3mm x 25mm machine screw until the rubber stopper expands and 1. Using a modeling knife, cut one length of tygon seals the tank opening.
  • Page 15 Focke - Wulf FW 190A Item code: BH87A INSTALLING THE STOPPER Tygon Tubing Copper Tygon Tubing Must be purchased separately!

  • Page 16: Installing The Throttle

    Focke - Wulf FW 190A Item code: BH87A INSTALLING THE THROTTLE direction. When the throttle stick is moved forward from idle to full throttle, the throttle barrel should also open and close using this motion. If not, - - - - - - 1...

  • Page 17: Cowling

    Focke - Wulf FW 190A Item code: BH87A Adjust the throttle input (transmitter throttle 4x4mm stick), throttle trim movement and the 2x10mm carburattor opening to the suitable position and screw in the 4x4mm set screw Linkage stopper Screw Pushrod wire...

  • Page 18: Installing Horizontal Stabilizer

    Focke - Wulf FW 190A Item code: BH87A 3x12mm Tp Screw 3x12mm Tp Screw INSTALLING HORIZONTAL STABILIZER Check to mark sure the wing and stabilizer are paralell. If they are not, lightly sand the opening in the fuselage for the stabilizer until the stabilizer is paralell to the wing, but don't glue anything yet.
  • Page 19 Focke - Wulf FW 190A Item code: BH87A With the horizontal stabilizer correctly aligned. 3) Check the fit of the horizontal stabilizer in its slot. Apply a thin CA layer to the top and bottom of the Make sure the horizontal stabilizer is square and stabilizer in the fuselage.

  • Page 20: Mounting The Tail Wheel Bracket

    Focke - Wulf FW 190A Item code: BH87A Servo arm Push rod Flaslink Flaslink Bend 90 Elevator pushrod MOUNTING THE TAIL BRACKET WHEEL 3x15mm Socket Head M2 Metal Clevis Cap Screw - - - - - - 1 1) Set the tail wheel assembly in place on the plywood...

  • Page 21: Rudder Installation

    Focke - Wulf FW 190A Item code: BH87A RUDDER INSTALLATION Hinges for Rudder are glued the same way as the aileron before (see page 8) 2x10mm Socket Head 2mm Flat washer Cap Screw - - - 1 - - - 1...

  • Page 22: Installing The Switch, Receiver And Battery

    Focke - Wulf FW 190A Item code: BH87A 2) Mark the locations of the two mounting screws. Remove the tail wheel bracket and drill 2mm pilot holes at the locations marked. INSTALLING THE SWITCH, RECEIVER AND BATTERY 4) Wrap the receiver and battery pack in the protective 1) Cut out the switch hole using a modeling knife.

  • Page 23: Wing Attachment

    Focke - Wulf FW 190A Item code: BH87A WING ATTACHMENT 6x45mm Wood of wing - - - - - - 1 Screw the wing panel in position. Attach the wing into the fuselage. 6x45mm Secure Wood of wing INSTALLING THE SPINNER, COCKPIT FUSELAGE Position the canopy so the rear frame on the canopy is aligned with the rear edge of the cockpit opening.
  • Page 24 Focke - Wulf FW 190A Item code: BH87A INSTALLING THE SPINNER Install the spinner backplate, propeller and spinner cone. The spinner cone is held in place using two 3mm Spinner 80mm x 8 mm machine screws. 3x8 mm Button Head Cap Screw...

  • Page 25: Installing The Electric Motor (Ep Version)

    Focke - Wulf FW 190A Item code: BH87A INSTALLING THE ELECTRIC MOTOR 4x15mm Socket Head 4mm Spring Washer Cap Screw - - - 4 - - - 4 M4 Blind Nut 4mm Spring Washer 4mm Flat washer 4mm Flat washer...

  • Page 26: Balancing

    Focke - Wulf FW 190A Item code: BH87A BALANCING With the wing attached to the fuselage, all parts 1) It is critical that your airplane be balanced correctly. of the model installed ( ready to fly), and empty fuel Improper balance will cause your plane to lose control tanks, hold the model at the marked balance point with and crash.

  • Page 27: Control Throws

    Focke - Wulf FW 190A Item code: BH87A In order to obtain the CG specified, reposition the receiver and other equipment. If not obtain the CG specified, add a weight and adjust. Do not fly before confirming the correct location of the CG. If the...

  • Page 28: Main Gear Dimensional Detail

    Focke - Wulf FW 190A Item code: BH87A MAIN GEAR DIMENSIONAL DETAIL 47mm 30mm 109mm 28.5mm 16 mm 5.1mm holes TAIL GEAR DIMENSIONAL DETAIL 23mm 3.1mm holes...
  • Page 29 Focke - Wulf FW 190A Item code: BH87A I/C FLINGT WARNINGS Always operate in open areas, away from NEVER fly near power lines,aerials or ALWAYS adjust the engine from behind factories, hospitals, schools, buildings other dangerous areas including airports, the propeller, and do not allow any part of and houses etc.

Table of Contents