Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ROE Topaz Series
Summary of Contents for ROE Topaz Series
- Page 1 Topaz Series User Manual Version: 1.4 Updated: 2024-03-15...
-
Page 2: Copyright
ROE. Warranty Policy The standard warranty period for the Products is 2 years after shipment from ROE Visual for rental applications and 3 years for fixed install applications. The contract will specify the application. This warranty includes all accessories, spare parts, and components shipped at the time of the original purchase. -
Page 3: Contact Information
Software or accessory malfunction. m. Any other cause not related to a defect in materials or workmanship. Contact Information If you have any questions about this document, please feel free to contact with ROE technical service team. ROE CHINA ROE EUROPE... -
Page 4: Table Of Contents
Data Cabling ..............................49 Others ................................49 Control System ........................50 Service Manual ........................51 Cleaning Tiles ..............................51 Module Replacement ..........................51 V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 4 / 54... -
Page 5: Safety
All components should be kept dry, clean, lubricated (only of recommended), coated properly, and otherwise maintained in a manner consistent with the part design. ROE products must be used in a manner consistent with their design and inspected on a routine basis for security, wear, deformation, corrosion and any other circumstances that may affect the loading capacity. - Page 6 LED when the LED heats up too aggressively. Therefore, ROE recommends that if you have not used a screen for a prolonged time and/or the screen was stored in a very humid environment, you slowly heat up the screen.
-
Page 7: Safety Instructions
(10) The installation must be performed by authorized and qualified technical personnel only. (11) Modules only can be removed after the tiles cools down V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 7 / 54... -
Page 8: Consignes De Sécurité
Les produits ROE doivent être utilisés conformément à leur conception et inspectés régulièrement pour vérifier leur sécurité, leur usure, leur déformation, leur corrosion et toute autre circonstance pouvant affecter leur capacité... - Page 9 LED lorsque la LED chauffe trop agressivement. Par conséquent, ROE recommande que si vous n'avez pas utilisé un écran pendant une période prolongée et / ou que l'écran a été stocké dans un environnement très humide, vous chauffez lentement l'écran.
-
Page 10: Consignes De Sécurité
(9) Veuillez ne pas utiliser le produit près de la mer et / ou d’autres lieux exposés à un environnement corrosif. (10) L'installation doit être effectuée par du personnel technique autorisé et qualifié. V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 10 / 54... -
Page 11: General Introduction
With both front and rear module service, the Topaz panels are easy to maintain. The integrated PSU and Hub unit make repair and replacement of spare parts easy and cost-effective. V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 11 / 54... -
Page 12: Specifications
Indoor IP Rating CE, CB, UKCA, ETL, FCC, WEEE Certifications 409,600 Pixel Density px / m² 262,144 200,704 147,456 3D Ready ≥50,000hours Lifetime V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 12 / 54... - Page 13 -40°~140°F, 10~90% RH IP Rating indoor Certifications CE, CB, ETL, FCC, UKCA, WEEE Pixel Density px / m² 262,144 147,456 3D Ready ≥50,000hrs Lifetime V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 13 / 54...
-
Page 14: Components
Vertical Connector Data Power-in Module Handle Test Button Indicator Power Box Tile Handle Side lock Power-out Data Hole-Assisted for stacking Figure 3-2.Topaz Parts Information V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 14 / 54... - Page 15 Topaz Series User Manual www.roevisual.com A Topaz tile consists of 4 pcs modules. Dimensions: 500 x 500 x 73 mm Figure 3-3. Topaz Module Dimensions V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 15 / 54...
- Page 16 Data Power-in Test Button Vertical module lock Power Box Tile Handle Side lock Power-out Data Hole-Assisted for stacking Figure 3-5. Topaz-Curved Parts Information V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 16 / 54...
- Page 17 Topaz Series User Manual www.roevisual.com A Topaz-Curved tile consists of 2 pcs modules. Dimensions: 500 x 500 x 108 mm Figure 3-6. Topaz-Curved Module Dimensions V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 17 / 54...
- Page 18 NOTE: The curve lock of TPC-2.6 support the adjustment of concave15° ~Convex15°, With 1°per step , TPC2.6 can make more angles possible. V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 18 / 54...
- Page 19 Figure 3-7. Topaz-B Components Vertical Connector Power-in Data Test Button Power Box Tile Handle Side lock Power-out Data Hole-Assisted for stacking Figure 3-8. Topaz-B Parts Information V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 19 / 54...
- Page 20 Figure 3-9. Topaz-B Module Dimensions Note: Corners of cube modules are more fragile, and that damage may result in a beyond repair module. V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 20 / 54...
-
Page 21: Accessory Information
Curved Block : When you use the Cube series to build Right-Angled shapes, please note that special bars are required for the Right-Angled parts. V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 21 / 54... - Page 22 Hanging System Basic dimensions of Topaz hanging bar, 0.5m. Basic dimensions of Topaz hanging bar, 1m. Basic dimensions of Topaz-C hanging bar, 0.5m. V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 22 / 54...
- Page 23 1W, clamp, V1.0 SAP: 207002S0696 Dimensions:496.86X154.43X219.3 mm For TP-Curved TP-B hanging bar, 1W, clamp, V1.0 SAP: 207002S0749 Dimensions:488X157.43X217.08 mm For TP-B in Right-Angle V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 23 / 54...
- Page 24 Note: The stacking system should be used every two-tile wide at least and it will be better to be used every one-tile wide when necessary. V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 24 / 54...
- Page 25 Max Height: 179.5mm Adjustment range: 40mm Min Height: 139.5mm Basic dimensions of Topaz stacking bar, 1m. Basic dimensions of Topaz-Cube stacking bar, 0.5m V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 25 / 54...
- Page 26 Topaz Series User Manual www.roevisual.com Basic dimensions of Topaz-Series base truss. Basic dimensions of Topaz rear truss. Basic dimensions of Topaz rear bridge. V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 26 / 54...
- Page 27 Stacking Bar_0.5m_V1.1 (EU Only) SAP: 207002S0698 Dimensions:495x105.5x146.5 mm Stacking Bar_0.5m_V1.0 (for TP-B in Right-Angle) SAP: 207002S0761 Dimensions: 488 x 174 x 105.5 mm V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 27 / 54...
- Page 28 Screws_HM10 x 20 The connecting plate is shipped with screws. If you need to but it additiona l, please make sure the specifications are consistent. V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 28 / 54...
-
Page 29: Cables
Connect neighboring panels vertically. Data cable, 0.9m, etherCON-etherCON, Belden, V1.0 SAP: 208004S1020 Weight: 100±5 g Neutrik _ Neutrik Connectors Connect panels in neighboring columns. V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 29 / 54... -
Page 30: Installation
Weight Do not underestimate the weight of tiles and frames. Please make sure the floor or truss on which ROE tiles and frames will be installed is capable of handling five times the complete weight of tiles and frames. Do not forget to take into consideration the ballast weight required by the stacking system. -
Page 31: Tp Series Mix And Match
A: You can splice left and right with TP-Flat / TP-B and TP- Curved with left and right splicing Splicing up and down is not allowed. Horizontal Combination Vertical Combination NOT Allowed! V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 31 / 54... - Page 32 Topaz Series User Manual www.roevisual.com B: You can use TP-Cube and TP-Flat for any splicing (flat only). V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 32 / 54...
-
Page 33: Hanging System
TP-Curved, please pay attention to adjusting the degree of the hanging bar/base bar to be consistent with the tile before installation. Set the curve angle by rotating this block. V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 33 / 54... - Page 34 Install tiles on hanging bars. Hanging bars will attract tiles to correct target position automatically with magnets. After aligning all hanging bars horizontally, rotate the lever of the clamps to fix the clamps to the truss. V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 34 / 54...
- Page 35 Lock the panel and hanging bar and install the second panel. Lock neighboring panels. V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 35 / 54...
- Page 36 Topaz Series User Manual www.roevisual.com Repeat above steps until all panels are installed. It is recommended to uninstall from right to left when uninstall tiles. V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 36 / 54...
-
Page 37: Stacking System
Set the curve angle by rotating this block V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 37 / 54... - Page 38 Take stacking accessories from the flight case and put the base bars and base trusses at the target place. Assemble stacking bars with base trusses. V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 38 / 54...
- Page 39 Note: It’s recommended to install panel from left to right based on the rear view. Keep panels at an angle to avoid damage to LEDs when magnets attract panels. Avoid damages to LEDs V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 39 / 54...
- Page 40 Topaz Series User Manual www.roevisual.com Lock the panel with the stacking bar. Adjust the stacking bar and the base truss to make the panel stand upright. V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 40 / 54...
- Page 41 Start to add the ballast on base trusses after installing the first row of panels. The ballast weight should be distributed evenly to every base truss. Note: The certain ballast weight please refer to 5.4 Ballast Weight Calculation. V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 41 / 54...
- Page 42 -The first and the last column in a screen always needs to be connected to a stacking system. -Above 4m height the rear truss needs extra lateral support. -For more options, you can check the Ballast Calculation on 44th page. V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 42 / 54...
- Page 43 (1) The adjusting range of the feet (stacking bar) is 48mm. (2) The rear bridge should be used in even rows. (Except the first row) V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 43 / 54...
-
Page 44: Use Tp-B To Build Right Angles
Use [Connector,3 screws] in the top and bottom, and use [right angle, 4 screws] in the middle, so that your right-angle shape is completed. V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 44 / 54... -
Page 45: Use Tp-B To Build Cube
Please use this additional connector (TP-B flat plate 4 screws) on the basis of right angles to e asily build the Cube shape. V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 45 / 54... -
Page 46: Ballast Calculation
Please download the ballast calculator at https://www.roevisual.com/news/news-blog/build-your- led-screen-safe-using-the-roe-visual-ballast-calculator.html or contact the customer service. V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 46 / 54... -
Page 47: Installation
Push handle back for locking. (Picture 4.8.2 Side lock operation Press the button in the blue circle and then rotate side lock down for locking. V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 47 / 54... -
Page 48: Cabling
(Main Power Cable_10m_Neutrik_Neutrik) 2. Power Cable_0.43m_Neutrik_Neutrik 3. Power Cable_2.4m_Neutrik_Neutrik Note: The number in cabling is in line with that of in cables. (See 5.4 Cables.) V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 48 / 54... -
Page 49: Data Cabling
(2) The cascade control data cables should not be more than 60 meters. When it's over 60 meters, please switch to fiber cables. V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 49 / 54... -
Page 50: Control System
2. Brompton Tessera Control System User Manual 3. Megapixel VR Helios Control System User Manual 8X10GB Fiber (Up to 10km) 1G or 2.5G Copper (Up to 100m) V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 50 / 54... -
Page 51: Service Manual
After the module is firmly absorbed by the suction pad, pull out the module. Disconnect the safety wire and swap the module. V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 51 / 54... - Page 52 Wipe off dust and dirt with a soft toothbrush gently. 7.2.2 Air compressor Aim the air gun at the spot where you want to clean, then start to blow the dirt away. V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 52 / 54...
- Page 53 Large area cleaning You can use a wrung-out rag to clean large area of panels (the rag should be wet with pure water) V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 53 / 54...
-
Page 54: Revision History
-Topaz Curved (TP-C) -Topaz Cube (TP-B) Added introduction to the use of TP-B connec 2024-03-15 ting plate Bruce Updated Specifications of Topaz Series. V1.4 | 2024-03-15 | Copyright © 2023 ROE Visual Co., Ltd. All Rights Reserved. 54 / 54...
Need help?
Do you have a question about the Topaz Series and is the answer not in the manual?
Questions and answers