Operation - Morphy Richards IB70313 Instructions Manual

70313 Rev 2 15/10/04
Tools and
accessories
Standard floor nozzle Ï
This nozzle is suitable for general
purpose cleaning on a wide variety of floor
coverings.
Turbo brush Î
This nozzle is suitable for cleaning and
rejuvenating cut pile carpets and is ideal for
picking up stubborn dirt and pet hairs.
Cleaning the turbo nozzle
The turbo nozzle should be regularly
cleaned and any hairs or fibres wrapped
around the brush bar removed to maintain
optimum performance.
Tool storage
The upholstery nozzle Ò, and the crevice
tool Ô and brush attachment  are stored
in the internal storage compartment. Lift to
open.

Operation

Suction hose
Push the 360° rotating head on the
suction hose È into the suction hose
opening ¤ on the vacuum cleaner.
The appropriate cleaning tool can be
attached directly to the other end of the
suction hose or the telescopic metal tube
can be used between the suction hose and
the tool.
Switching on
Always pull out the supply cable to its
maximum length. Plug the appliance into the
mains supply. Ensure that the variable power
control fi is set to minimum by turning the
dial anti-clockwise as far as it will go. Push
the on/off switch ‚ to start the motor. Turn
the variable power dial clockwise to the
desired power.
11:10 AM Page 4
4
Standard
accessories Application
Curtains and
delicate
fabrics
Textiles and
upholstery
Shelves and
hard surfaces
Carpets and
other textile
floor coverings
(brushes up)
Settings for
heavy dirt and
smooth floors
(brushes down)