Operation; Operating The Appliance; Tools And Accessories; Turbo Brush - Morphy Richards Storm pets cylinder vacuum cleaner Owner's Manual

70313 rev3 3/7/06 13:59
OPERATING THE
APPLIANCE
TOOLS AND
ACCESSORIES
Standard floor nozzle
This nozzle is suitable for
general purpose cleaning on a
wide variety of floor coverings.

Turbo brush

This nozzle is suitable for
cleaning and rejuvenating cut
pile carpets and is ideal for
picking up stubborn dirt and pet
hairs.
Cleaning the turbo
nozzle
The turbo nozzle should be
regularly cleaned and any hairs
or fibres wrapped around the
brush bar removed to maintain
optimum performance.
Tool storage
The upholstery nozzle Ò, and
the crevice tool Ô and brush
attachment  are stored in the
internal storage compartment.
Lift to open.

OPERATION

Suction hose
Push the 360° rotating head on
the suction hose È into the
suction hose opening ¤ on the
vacuum cleaner.
The appropriate cleaning tool
can be attached directly to the
other end of the suction hose or
the telescopic metal tube can
be used between the suction
hose and the tool.
Switching on
Always pull out the supply cable
to its maximum length. Plug the
appliance into the mains supply.
Ensure that the variable power
4 4 UK Helpline 0870 060 2604
Page 4
Standard
accessories
Ï
Î
control fi is set to minimum by
turning the dial anti-clockwise
as far as it will go. Push the
on/off switch ‚ to start the
A
motor. Turn the variable power
dial clockwise to the desired
power.
B
C
Replacement Parts 0870 167 6635
Application
Curtains and delicate
fabrics
Textiles and upholstery
Shelves and
hard surfaces
Carpets and
other textile
floor coverings
(brushes up)
Settings for
heavy dirt and
smooth floors
(brushes down)
A
B
C
409119
Ireland Helpline 1800