Eads Telecom Connexity M730 User Manual page 72

Settings
Adjusting the key beep volume
Each time a key is pressed, a beep is given. The volume of this beep can be adjusted to 8
levels. The lowest level corresponds to elimination of the beep.
Customizing the set password
To access certain facilities (unlocking the set, virtual desking function, etc.), you will need a
password. This code (which is different to the mailbox access code) is 0000 by default. You
must customize this password prior to any use (to unlock the set, for example).
or
xxxx (Current password)
xxxx xxxx
66
With the set idle,
- Consecutively press keys
the key beep volume.
Each time the key is pressed, the new setting is broadcast.
The last setting made remains stored by the set.
1 - Press the
The display shows the message "PSWD?".
2 - Key in the current
Note: If not customized, the code is 0000 by default.
3 - Key in the new password
a sound message and the display confirm the action.
Note: Remember this code. You will need it to access certain
functions.
or to decrease or increase
keys in succession.
password.
twice.