Eads Telecom Connexity M730 User Manual page 68

Locking the set
Locking the set
Use this function during absences, for example, so you can block outgoing calls from your set
and prevent access to your logs (LNR calls log and incoming calls log) and also to your private
directory.
Important: before activating the locking of your set, you must first have customized your
password (refer to section on Settings - Customizing the set password).
Locking your set
If you want to lock your set.
or
Calling an external correspondent from the locked set
If you have locked your set but may at the time want to call an external correspondent without
unlocking your set.
or
Password
62
- Press the
The display shows the message "LOCKED SET".
1 - Hold the red key
The display waits or the locking confirmation.
2 - Press the key.
The display shows the message "LOCKED SET".
Note: You can still call an internal correspondent with the set
locked.
1 - Dial the external access code
The display will ask you to enter your password.
2 - Dial your password.
. If you make a mistake, dial your password again.
As soon as the password is validated, you will be authorized
access to external calls.
You can dial your correspondent's number. When the
correspondent answers, you can hold a conversation.
Note: At the end of the conversation, the set will return to
locked status.
keys in succession.
pressed down for 3 seconds.
(0).