Eads Telecom Connexity M730 User Manual page 69

Calling an emergency number from a locked set
You can make emergency calls from a locked set.
Deactivating set locking
When in idle mode, the display will remind you that the set is locked. If you want to unlock
the set.
or
Password
- Dial the emergency number
Note: Your set will accept a number contained in a list of
emergency numbers (ambulance, fire brigade, etc.) that is
programmed by the system operator.
At the end of the conversation, the set will return to locked
status.
- Press the
The display prompts you to enter your password.
- Hold the red key
The display prompts you to enter your password.
Note: When you have pressed a key (
keys), you will also be prompted to enter the password to
deactivate the locking.
- Dial your password.
Note: If the code is wrong, the display shows "BARRED". You
will have to repeat the operation.
As soon as the code is validated, the display will confirm
deactivation of locking.
You will then again have access to all of the set facilities.
Locking the set
(e.g. 18).
keys in succession.
pressed down for 3 seconds.
green key, or
63