Eads Telecom Connexity M730 User Manual page 70

Settings
Settings
Choosing and setting the set ring
You can choose the type of melody (16 different melodies) and adjust the volume (8 levels) of
the current ring.
A specific ring is used to inform you when the correspondents stored in the private directory
call you. You can choose the melody and adjust the ring volume.
Choosing and setting
the current melody:
64
1 - Press the key.
The display shows " PROGRAMMING".
2 - Press the key until the display shows " RING".
RING
3 - Press the key.
The display indicates the current ring melody.
4 - Consecutively press the
different settings of the ring.
When the display indicates «MELODY: XX».
- Consecutively press the
current melody. Sixteen different melodies are available.
Note: By default, melody No. 8, is used to inform you when
the correspondents stored in the private directory call you.
Therefore, we recommend that you choose another melody as
the current melody.
Each time the key is pressed, the corresponding melody is
broadcast and the display indicates its number.
- Press the key.
The display indicates «VOLUME: X».
- Consecutively press the
current ring volume.
The volume can be set at 8 levels, including ringing cutoff.
Each time the key is pressed, ringing is broadcast at the new
level and the display indicates this level.
- Press the key to confirm the setting.
or keys for access to
or keys to choose the type of
or keys to to adjust the