Eads Telecom Connexity M730 User Manual page 59

Communicating with the supervision function
You have programmed the supervision function for one extension on a customizable key.
On your set, the status of the lamp associated with the key programmed for supervision will
vary depending on the status of the extension supervised.
Superv
Ext. 1
Superv
Ext. 1
Superv
Ext. 1
Intercepting a call:
Superv
Ext. 1
Transferring the call
received to the
supervised extension:
Superv
Ext.1
Calling the supervised
extension:
Superv
Ext. 1
. When the supervised extension is idle, the lamp associated
with the key will be extinguished.
. When the line of the supervised extension is busy, the lamp
associated with the key will be illuminated.
. When a call arrives on the supervised extension, the lamp
associated with the programmed key will flash quickly and,
depending on the programming, a sound message* will sound
on your set.
Suppose the supervised extension receives a call and you want to
intercept this call.
- Press this programmed key
You can hold a conversation with the call initiator.
The lamp associated with the programmed key goes out.
Suppose you are in communication with a correspondent and
want to transfer this correspondent to the supervised extension.
- Press the programmed key
The lamp associated with the programmed key will illuminate.
Suppose you want to call the supervised extension.
- Press the programmed
The lamp associated with the programmed key will illuminate.
When the correspondent answers, pick up the handset to hold
the conversation.
* Depending on the features provided by your system operator
The supervision function
and pick up the
then hang up.
key.
handset.
53