Subscribe to Our Youtube Channel
Related Manuals for JK 191/40-3 PLT AC
Summary of Contents for JK 191/40-3 PLT AC
- Page 1 Operating instructions Model-No.: JK 191 / 40-3 PLT AC JK 191 / 40-3 PLT 1032810-00 / us-en / .2024...
-
Page 2: Contact Information
Contact information Contact information Customer Service JK Products & Services 411 West Washington Avenue Suite B Jonesboro, Arkansas 72401 800-445-0624 870-935-9046 http://jkproducts.us/service Manufacturer JK-Products GmbH Rottbitzer Str. 69 53604 Bad Honnef GERMANY Tel.: +49 (0) 22 24 / 818-0 Fax: +49 (0) 22 24 / 818-166 WARNING! Read these operating instructions. -
Page 3: Table Of Contents
Table of Contents Table of Contents Table of Contents .............. 3 What certain words and signs mean (Glossary)....7 Definitions ................. 7 Warning signs ................8 Symbols on the device ............10 What this device is ............12 Guidelines................12 Export .................. - Page 4 Table of Contents What you must do to avoid other harm......34 General ..................34 Tanning system ..............34 Sensor ..................34 Vibra Shape (vibration plate) ..........34 Foreseeable misuse ............... 35 Obligations of the studio operator ........35 Staff training ................35 Risks of using this device ..........
- Page 5 Where you can find out more ........... 83 How we studied this device ..........84 Appendix ................. 85 16.1 Model-No.: JK 191 / 40-3 PLT : EMC information ....85 16.1.1 Table 201: Guidelines and manufacturer's declaration – Electromagnetic emissions ......85 16.1.2...
- Page 6 Table of Contents JK-Products, Inc. – Limited Warranty ....... 89 17.1 Limited Acrylic Warranty ............90 17.2 Warranty Claims ..............91 17.2.1 Policy & Procedures ............... 91 17.2.2 Labor Warranty Claim/ Credit Procedures ......92 17.2.3 Quality inspection and acceptance form ......92 17.3...
-
Page 7: What Certain Words And Signs Mean (Glossary)
Authorized to perform maintenance and repairs such as replacement of ballast, framed acrylic, electronic circuit boards, and other electrical components. Level 3 Authorized and trained to utilize JK Products proprietary diagnostic software to adjust operating parameters and perform detailed diag- nostics. Level 4... -
Page 8: Warning Signs
What certain words and signs mean (Glossary) Warning signs Danger notices, nonobservance will lead to death or serious injury: DANGER! Type and source of danger, e.g. 'DANGER – High voltage!' Description of the consequences, e.g. 'You can be killed or injured by an electric shock!' Countermeasures: –... - Page 9 What certain words and signs mean (Glossary) Caution notices, nonobservance can lead to less than serious injury or damage of property. CAUTION! Unauthorized lamps! The word 'Caution' together with the warning sign points out that less than serious injury can be ex- pected here.
-
Page 10: Symbols On The Device
What certain words and signs mean (Glossary) Symbols on the device The following symbols are displayed on the device or on the packaging: Manufacturer, company address Type BF applied part Quantity Article Number/Reference Number Serial Number Unique Device Identification Healthcare Barcode Read the operating instructions! Where there are great differences in temperature between the transport route and the installation site the device may not be put... - Page 11 What certain words and signs mean (Glossary) Temperature limitations. The temperature limits are noted next to the upper and lower hor- izontal line. Recyclable material. Production year, month and day Polystyrene Cardboard Mixed paper Steel Wood Permitted air pressure during transport and storage. 10/2024 1032810-00 Operating instructions –...
-
Page 12: What This Device Is
What this device is What this device is Guidelines This product is in conformity with the performance standards for sunlamp products under 21 CFR 1040.20, FDA and listed with ETL to UL STD 482. Export This device is exclusively intended for use in the USA and may not be exported to other countries and operated there! The manufacturer as- sumes no liability whatsoever in the event of non-compliance. -
Page 13: Device Description
What this device is Device description 1. Facial tanner (SPECTRA LED Boards + low pressure lamps) 2. EASY CONTROL 3. Low pressure lamps, base 4. Acrylic panel, base 5. Partition 6. Adjustable air nozzles – Facial cooling 7. Body cooling air nozzles 8. -
Page 14: Options
What this device is Options 1. Stereo Sound with Voice Guide and Bluetooth® or Stereo Sound 2. Air conditioning system Function description Tanning system The primary technical components of sunlamp products are artificial sources of UV radiation and a mechanical structure. Different UV sources intensities with characteristic UV-A and UV-B proportions re- sult in cosmetic tanning of the human skin. -
Page 15: Transport
What this device is Transport Tanning system Installation location This sunlamp product is suitable for tanning salons, fitness studios or similar installation locations. You may find detailed information on installation and setting up in the Installation Instructions (see folder Technical Documentation). 3.8.1 Ventilation NOTICE... -
Page 16: Setup Location
What this device is 3.8.2 Setup location WARNING! Sudden movements and malfunctions! Crushing hazard. – The device is not suitable for operation in mo- bile facilities (ships, buses, trains). CAUTION! Danger of overheating by obstruction of the air routing! Any liability is excluded in case of damage or injury proven to be the result of the use of non-genuine spare parts. - Page 17 What this device is NOTICE Damage to the device possible! The device is not to be used outdoors. Keep open flames or ignition sources away from the appliance. Environmental conditions Optimum ambient temperature: between 59 °F (15 °C) and ~ 90°F (~ 32°C) Storage temperature: between 5 °F (-15 °C) and 140 °F (+60 °C) ...
-
Page 18: Commissioning
If the device has not been operated or serviced for a period of one year or longer, it must first be inspected by a (Level 3) JK Factory Cer- tified Technician before being put back into operation. Failure to do so may result in personal injury or property damage. -
Page 19: Signs And Stickers On The Device
What this device is Signs and stickers on the device Signs which warn of danger areas or give important information on components are attached to the device. Ensure that the instruction signs are always clearly recognizable and easily legible. Any missing instruction signs or stickers must be replaced. - Page 20 What this device is 2: UDI plate (example) 3: Sticker (1014367-..) 4: Exposure label 1028432-.. The sticker is mounted on the lamp cover foot end. 20/96...
- Page 21 What this device is 5: Lamp cover base sticker (801139-..) 6: Age warning label (1508746-..) The sticker is mounted on the front panel. 7: Warning sticker UV radiation (801140-..) 10/2024 1032810-00 Operating instructions – 21/96...
- Page 22 What this device is 8: Sticker EMERGENCY OFF (1512131-..) The sticker is mounted at the head end on the inside of the canopy. This sticker also includes the language form 1018688-.. (see Tech- nical Documentation folder). 9: Sticker 'Follow Operating Instructions' (1014232-..) 10: Power unit ESD CND (1029421-..) 11: OEM parts sticker CND (1029426-..) 22/96...
- Page 23 What this device is 12: USA mains connection sticker (1512338-..) The sticker is mounted on the bottom of the bed base. 13: Air conditioning sticker R32/290 (1032302-..) 10/2024 1032810-00 Operating instructions – 23/96...
-
Page 24: Technical Data
What this device is 3.10 Technical data 3.10.1 Power rating, electrical specifications and noise level Model-No.: JK 191 / 40-3 PLT AC Power consumption rating with air conditioning: 7,100 W Rated frequency: 60 Hz Rated voltage: 230 V 3 phase... - Page 25 What this device is Model-No.: JK 191 / 40-3 PLT Power consumption rating without air conditioning: 6,700 W Rated frequency: 60 Hz Rated voltage: 230 V 3 phase 230 V 2 phase Rated overcurrent protection device: 30 amp 3-pole* 40 amp 2-pole*...
-
Page 26: Dimensions
What this device is 3.10.2 Dimensions 53,94 in 1,370 mm B1 = 32,87 in 835 mm B4 = 50 in 1,270 mm 85,04 in 2,160 mm (without Sound System) (without Sound System) L* = 88,98 in 2,260 mm (with Sound System) (with Sound System) L1 = 84,65 in... -
Page 27: Lamp Configuration
What this device is 3.10.3 Lamp configuration NOTICE The use of other lamps and filter panels voids the operating license! Model-No.: JK 191 / 40-3 PLT Lamp set Number Length Power Control Order-no. UV low-pressure lamps 12 3/16 in (0.31 m) 8 W 8 W / 0 W 1517167-.. -
Page 28: Spare Parts
What this device is 3.10.5 Spare parts Number Description Order-no. Filter (optional) 51937-.. Filter 55567-.. Partition 1014188-.. Filter mat (optional) – Filter mats 1013452-.. For more spare parts, contact Customer Service (see page 2). 28/96... -
Page 29: Why You Use It
Why you use it Why you use it Intended use This sunlamp product is intended exclusively for aesthetic tanning of the human skin, for one person at a time, at the age of 18 or above. Skin condition You may benefit from the use of this device if you tan in natural sunlight (skin types III, IV and V), ... -
Page 30: Who Cannot Use It
Who cannot use it Who cannot use it Prohibited usage 5.1.1 Tanning system WARNING! Danger through ultraviolet radiation! Danger of skin and eye injuries or skin diseases! – Please observe the following instructions. The following people must not use the device: People under 18 years of age ... -
Page 31: What You Must Do To Avoid Serious Harm
What you must do to avoid serious harm What you must do to avoid serious harm General DANGER – HIGH VOLTAGE! You can be killed or injured by an electric shock! Assembly and electrical connection must comply with national and local regulations. –... -
Page 32: Tanning System
What you must do to avoid serious harm Tanning system WARNING! Unprotected tanning may result in eye injury and eye diseases! The unprotected eye can become inflamed on the surface, and in certain cases the retina can be dam- aged by excessive radiation. Cataracts can form af- ter repeated exposure to radiation. -
Page 33: Sensor
What you must do to avoid serious harm WARNING! This device emits electromagnetic fields! EM-Emission inside device: – 5 Hz – 2 kHz max. 2.1 μT (1.5 kV/m) 2 kHz – 400 kHz max. 3.3 μT (1.3 kV/m) 9 kHz – 30 MHz max. -
Page 34: What You Must Do To Avoid Other Harm
What you must do to avoid other harm What you must do to avoid other harm General WARNING! Infections can be transferred through skin contact. All items/equipment components, with which the user can come into contact during tanning, must be disinfected after every tanning session: –... -
Page 35: Foreseeable Misuse
What you must do to avoid other harm Foreseeable misuse The following uses of the device are explicitly prohibited: Only one person at a time may use the device. People with body weight of more than 330 lbs (150 kg) may not ... -
Page 36: Risks Of Using This Device
Risks of using this device Risks of using this device WARNING! Danger through ultraviolet radiation! Danger of skin and eye injuries or skin diseases! – Please observe the following instructions. This sunlamp product must not be used on individuals who have ... -
Page 37: Benefits Of Using This Device
Benefits of using this device Benefits of using this device The primary technical components of sunlamp products are artificial sources of UV radiation and a mechanical structure. Different UV sources intensities with characteristic UV-A and UV-B proportions re- sult in cosmetic tanning of the human skin. The UV-A proportion primarily generates a superficial tan, which ap- pears rapidly and is intensive but also fades more rapidly. -
Page 38: How To Decide To Use This Device
How to decide to use this device How to decide to use this device This device is intended only for commercial use and not for private use. Some people are not permitted to use the device, see chapter 5. The device may not be used by people with reduced physical, sensory or mental capabilities or who have insufficient experience and/or knowledge without supervision. -
Page 39: What To Do Before The Treatment
What to do before the treatment What to do before the treatment Please check for any conditions that may prohibit the use of this de- vice – see chapters 5, 6, 8, 10. Make-up in the tanning device Please do not wear make-up. Clean skin absorbs UV light better. A wide variety of materials is found in cosmetics. -
Page 40: How To Use This Device
How to use this device How to use this device 12.1 How to set this device up After commissioning and cleaning/disinfection, the device is ready for operation. See chapter 12.5. 12.2 How to make sure the device works Before using the device, check for damage to filter panels and acrylic panels. -
Page 41: How To Choose Correct Treatment Regimen
How to use this device 12.4 How to choose correct treatment regimen 12.4.1 Skin types Skin type I (Sensitive): Invariably gets sunburn, accepts little natural sunlight and does not tan. Skin type II (Fair): Gets sunburn easily and severely, tans minimally or lightly and peels. Skin type III (Average): Often referred to as “Average”... -
Page 42: How To Operate The Device
How to use this device 12.5 How to operate the device 12.5.1 Control Center Not applicable for this device. 12.5.2 User settings overview Not applicable for this device. 42/96... -
Page 43: Functions
How to use this device 12.6 Functions 1. START/STOP button 2. Display – Functions ... 3. SPECTRA LED Boards pictogram, facial tanner 4. Body cooling/facial cooling pictogram 5. Air conditioning pictogram (optional) 6. Plus/Minus button 7. Voice Guide pictogram 8. Volume pictogram 9. -
Page 44: Navigation
How to use this device 12.6.1 Navigation EASY CONTROL The EASY CONTROL enables comfortable access to functions. Acknowledge selection. Change the parameters of the device function. Start / Stop Information about the setting options can be found in the separate docu- ment 'Setup Manager' 1032088-.. -
Page 45: Description
How to use this device 12.6.2 Description Pictogram selection / Navigation Description / Display Information key sequence START The tanning time continues to run if Switches the lamps on / off during the lamps are switched off during tan- the tanning session. The process ning session. -
Page 46: Operating Display Of The Sensor
How to use this device Pictogram selection / Navigation Description / Display Information key sequence Adjust SPECTRA LED Boards: The application type can be selected via Levels 0 - 2 To switch the air conditioning During tanning the air conditioning can unit off: only be switched back on after 3 Press the minus button for 3... -
Page 47: Selection Of The Application
How to use this device 12.8 Selection of the application Not applicable for this device. 12.9 Sun Select setting with the outer interface Not applicable for this device. 12.10 Measurement (automatic mode) Not applicable for this device. 10/2024 1032810-00 Operating instructions – 47/96... -
Page 48: Connections
How to use this device 12.11 Connections (optional with Stereo Sound and Bluetooth®) WARNING! Danger of hearing damage! Using earphones or headphones at high volume can result in permanent hearing damage. – Do not set the volume too high. 12.11.1 Couple with Bluetooth®... -
Page 49: Bluetooth® Settings In The Setup Manager
How to use this device 12.11.2 Bluetooth® settings in the Setup Manager To be able to use Bluetooth® the settings must be configured in the Setup Manager. NOTE: To open the Setup Manager, press button approximately 3 seconds in standby mode. The Bluetooth®... -
Page 50: Smartphone
How to use this device 12.11.3 Smartphone CAUTION! The heat might damage your smartphone! – Do not place the unit directly in the radiation area. NOTE: The personal use of an MP3 music files during tan- ning is not a public broadcast in copyright terms, so that there is no obligation for registration or pay- ment by the studio owner to the corresponding cop- yright owning company. -
Page 51: How To Use
How to use this device 12.12 How to use NOTE: Before use the device must always be cleaned and disinfected! See chapter 12.15 How to clean/disin- fect. 12.12.1 How to start The device is started automatically with an internal or external timer. NOTE: See separate document 'Timer Control Module' #1030705-.. -
Page 52: What To Do After The Treatment
How to use this device 12.13 What to do after the treatment 12.13.1 Cleaning and disinfection WARNING! Infections can be transferred through skin contact. All items/equipment components, with which the user can come into contact during tanning, must be disinfected after every tanning session: –... -
Page 53: Safety Instructions For Cleaning/Disinfection And Maintenance
Global Service USA at 800 445 0624, Monday through Friday 8:00 a.m. - 5:00 p.m. CT. NOTE: The service of the device may only be carried out by a (Level 2) JK Factory Certified Technician. 10/2024 1032810-00 Operating instructions – 53/96... - Page 54 Presetting mode – see separate document Setup Manager 1032088-.. in the Technical Documentation folder. Please note that the device must be inspected regularly by a JK au- thorized representative every 12 months (from date of installation) to...
- Page 55 How to use this device Acrylic panel NOTICE Cosmetics may cause cracks to form on the surface! Over the long-term cosmetics or sunscreens cause damage (e.g. crack formation on the surface). – Ensure that cosmetics and sunscreens are removed before tan- ning.
-
Page 56: How To Clean/Disinfect
How to use this device 12.15 How to clean/disinfect WARNING! Infections can be transferred through skin contact. All items/equipment components, with which the user can come into contact during tanning, must be disinfected after every tanning session: – Protective goggles –... -
Page 57: Cleaning And Disinfection Of Surfaces
How to use this device 12.15.1 Cleaning and disinfection of surfaces Acrylic panel NOTICE! Do not rub with a dry cloth – danger of scratching! – Other cleaning agents, especially disinfectants or solvents (e.g. Lysoform, ethyl alcohol or other liquids containing alcohol) must never be used for cleaning. -
Page 58: Cleaning/Disinfection Plan
How to use this device 12.15.2 Cleaning/disinfection plan Component Interval Activity See page Handle Cleaning and disinfection Filter Remove and clean filter EASY CONTROL Cleaning and disinfection Acrylic panel Cleaning and disinfection Adjustable air nozzles Cleaning and disinfection Air nozzles Clean Acrylic panel Cleaning and disinfection... -
Page 59: How To Maintain
The following maintenance activities shall be performed by the studio operator or a (Level 1) JK Factory Certified Technician. The following items are considered consumables and should be re- placed as noted. Replacement of these components helps ensure con- tinued performance of the device. - Page 60 How to use this device Maintenance performed by the studio operator or a JK Factory Certified Technician Component Interval Activity See page Low-pressure lamps, base Replace Low-pressure lamps, canopy Replace Low-pressure lamps, facial tanner Replace Partition Replace Filter Replace Filter (only for devices without air conditioning)
-
Page 61: Cleaning And Maintenance Work Preparation
Once the age of the device reaches ten (10) years from the date of manufacture, its condition must be assessed by a (level 4) JK Factory Certified Technician before use of the device can be continued. Failure to have this device assessment performed may result in per- sonal injury or property damage. - Page 62 How to use this device Remove the acrylic panel and the partition – Remove the screws and remove the washers. NOTICE Risk of scratching! – Use the recesses provided on the acrylic panel. – Push the bed to the rear with one hand and pull it out of the front guide with the suction cup.
- Page 63 How to use this device – Remove the partition and carefully set aside (only for devices with an air conditioning unit). The assembly is the same process in reverse order. When assembling the device please note: – When positioning the lamp covering push the pins into the opening.
-
Page 64: Remove The Canopy Panel
How to use this device Remove the canopy panel – Loosen the screws. – Support the canopy panel with one hand so that it does not fall down. – Carefully lower the canopy panel. The canopy panel must be completely removed from the device in order to replace the low pressure lamps. - Page 65 How to use this device – Remove the canopy panel with the aid of a helper. When assembling the device please note: – Carefully lay the canopy panel in the guide. NOTICE! The cable may get damaged! – Do not pinch or kink the cable. –...
-
Page 66: Remove The Side Section Panel
How to use this device – Support the canopy panel with one hand so that it does not fall down. – Tighten screws: first the screw in the middle, then the outer screws. – Remove fingerprints and other soiling carefully. Remove the side section panel Not applicable for this device. - Page 67 How to use this device – Unplug connector ST 54 from the part carrier. – Remove the front panel from the guide. – Carefully lift the upper edge of the front panel out of the holder (pull upwards). – Lift the front panel in order to lift it out of the two lower hooks.
-
Page 68: Instructions For Replacing The Lamps
How to use this device 12.16.4 Instructions for replacing the lamps WARNING! Danger of burns from hot lamps and device parts! If the tanning device was operated before being switched off and opened, lamps and housing parts may be hot. –... -
Page 69: Low-Pressure Lamps
How to use this device Low-pressure lamps WARNING! Danger of burns from hot lamps and device parts! If the tanning device was operated before being switched off and opened, lamps and housing parts may be hot. – Before replacing lamps or other spare parts, wait until lamps and metal parts of the device have cooled down sufficiently. -
Page 70: Makrolon Tubes
How to use this device Makrolon tubes Not applicable for this device. Starter Not applicable for this device. SPECTRA LED boards CAUTION! SPECTRA LED boards are very sensitive optical components. Risk of scratches! Failure to observe this information will invalidate any warranty claims. -
Page 71: Cleaning Or Replacing Lamps In The Base
How to use this device 12.16.6 Cleaning or replacing lamps in the base – Lift up the acrylic panel and then remove the lamp covers and the partition: see page 62. – Replace the lamp: see page 68 12.16.7 Cleaning or replacing the lamps in the side section Not applicable for this device. -
Page 72: Cleaning Or Replacing The Lamps And Filter Panels In The Shoulder Tanner
How to use this device – Support the canopy panel with one hand so that it does not fall down. – Tighten screws: first the screw in the middle, then the outer screws. – Remove fingerprints and other soiling carefully. 12.16.9 Cleaning or replacing the lamps and filter panels in the shoulder tanner... - Page 73 How to use this device – Dry or moist clean the filter. Dry cleaning: Vacuum cleaner (depending on the degree of soiling). Moist cleaning: Water and detergent, or with a dishwasher. NOTICE! The device may be damaged by moisture! The cleaned filters must be dry before they are replaced. –...
- Page 74 How to use this device – Set up the acrylic glass panel. – Place the front panel into the guide. – Tilt the front panel into the service position. – Close the front panel (1). – Push the front panel down slightly (2). –...
-
Page 75: Cleaning The Canopy Filter Mats
How to use this device 12.16.14 Cleaning the canopy filter mats WARNING! Fire hazard due to dust particles in the air intake openings! Dust particles are flammable! Regularly remove dust particles from the air intake area. – Use a vacuum cleaner to prevent dust particles from getting inside the unit. -
Page 76: Air Conditioning: Empty The Condensation Tank And Clean The Filter
How to use this device 12.16.16 Air conditioning: Empty the condensa- tion tank and clean the filter NOTICE Damage to the device through soiled filters and cooling fins! Regularly check the filter grill and cooling fins on the Air condition- ing system and clean if necessary. - Page 77 How to use this device – Clean the soiled cooling fins on the air condi- tioning unit with the fin comb. NOTICE! The device may be damaged by moisture! The cleaned filter and filter mat must be dry before they are re- placed.
-
Page 78: Aqua / Aroma System Maintenance
How to use this device – Attach the condensate tank to the hose. – Replace the condensate tank and the air condi- tioning unit. – Close the front panel (1). – Push the front panel down slightly (2). – Tighten 5 screws: Start with the middle screw first, then lightly screw in the right and left screw. -
Page 79: How To Store The Device
All packaging consists of 100 % recyclable materials. Disposal of old devices The device has been manufactured using recyclable materials. The JK Products & Services will provide you with information on the content or potential hazards of the materials used. Disposal of consumable supplies Dispose of consumable supplies according to the national waste dis- posal laws and in accordance with the municipal waste regulations. -
Page 80: What To Do When Things Go Wrong
What to do when things go wrong What to do when things go wrong WARNING! Follow instructions! Failure to use protective eyewear may result in se- vere burns or other eye injury. If discomfort devel- ops, discontinue use and consult a physician. –... - Page 81 What to do when things go wrong NOTE: Occasionally, persons using the tanning device will experience a slight reddening of the skin – usually in small patches – after the second or third session. This redness is often accompanied by an itching sensation.
-
Page 82: Troubleshooting
What to do when things go wrong 13.1 Troubleshooting Software and device malfunctions are indicated by error codes, e.g. E005. These error codes are output to the display to simplify troubleshoot- ing: If a fault occurs, the error code flashes on the display. ... -
Page 83: Where You Can Find Out More
Where you can find out more Where you can find out more If you have any questions, please contact Customer Service (see page 2). 10/2024 1032810-00 Operating instructions – 83/96... -
Page 84: How We Studied This Device
How we studied this device How we studied this device The system is built to the state of the art and the applicable safety regulations. We reserve the right to make technical changes which are necessary to improve the system or a system component even if they deviate from pictures and information in these instructions. -
Page 85: Appendix
HF emissions as per CISPR 11 Class B Model-No.: JK 191 / 40-3 PLT has been designed for use in all devices, including those in residential areas, and it has been determined that it can be used for residential purposes as soon as it is connected up to a public mains supply that also supplies buildings. - Page 86 Appendix 16.1.2 Table 202: Guidelines and manufac- turer's declaration – Electromagnetic interference The tanning system has been designed for use in the electromagnetic environment specified below. The device operator must ensure that it is used in such an environment. Interference IEC 60601 - Defined Electromagnetic environ-...
- Page 87 6 V RMS in the ISM and RMS in the ISM and ama- the Model-No.: JK 191 / 40-3 PLT amateur radio bands teur radio bands and its cables other than the recom-...
-
Page 88: Em-Emission Inside Device
HF communications equipment and Model-No.: JK 191 / 40-3 PLT Model-No.: JK 191 / 40-3 PLT has been designed for use in an electro- magnetic environment in which the radiated HF interference is con- trolled. The operator of the device can help to reduce electromagnetic... -
Page 89: Jk-Products, Inc. - Limited Warranty
JK-Products, Inc. – Limited Warranty JK-Products, Inc. – Limited Warranty JK-Products, Inc. warrants its products to be free from defects in ma- terials and workmanship under intended normal use as described in the unit's Operation and Installation Instruction, for a period of one (1) year from date of sale. -
Page 90: Limited Acrylic Warranty
Due to the tanning lotions, cosmetics, disinfectant and improper cleaners used on tanning surfaces that can- not be controlled by JK Products, Inc., after the first thirty (30) days of warranty period acrylic will be subject to a prorated cost to the con- sumer. -
Page 91: Warranty Claims
Warranty Claim will be consid- ered. 2. Where to call to place a Warranty Claim: JK-Products, Inc. is supported nationwide by an extensive dealer/dis- tributor network through whom the majority of our units are sold. These dealers/distributors are required by contract to stock sufficient parts to meet the various warranty and nonwarranty needs of their customers. -
Page 92: Labor Warranty Claim/Credit Procedures
JK-Products, Inc. – Limited Warranty You must comply to the instructions and warnings under chapter: 4.1 Intended use 5.1 Prohibited usage 6. What you must do to avoid serious harm Any other use shall be considered improper. The manufacturer cannot be held liable for damage or injuries resulting from misuse. -
Page 93: Limited Lifetime Warranty
JK-Products, Inc. headquarters. JK Products, Inc. obligations do not include transportation charged on the shipping of new components to the customer or on the return of defective components of the manufacturer. All freight charges must be paid by the customer. -
Page 94: Index
Index Index Acrylic panel.................... 62 Load ....................24 Air conditioning Filter ....................76 Air routing ....................15 Application tips ..................51 Bluetooth® ....................48 Canopy panel ..................64 Cleaning .................... 52, 56 Air conditioning ................. 76 Filter ....................72 Filter mats ..................75 Cleaning or replacing lamps Canopy .................... - Page 95 Index Filter Cleaning ..................72, 75 Foreseeable misuse ................35 Functions ....................43 Guidelines ....................12 Installation location ................15 Intended use................... 29 Lamp configuration ................27 Lamps Control ....................27 Power rating..................27 Lamps, Replacing................... 68 Low-pressure lamps ................69 Maintenance intervals ................
- Page 96 Index Safety measures during maintenance work ......... 53 Scope of delivery ..................12 Service kit ....................61 Setup location ..................16 Skin condition ..................29 Skin types ....................41 Spare parts ....................59 Order numbers................... 28 SPECTRA LED boards (care)..............70 Staff training ...................
Need help?
Do you have a question about the 191/40-3 PLT AC and is the answer not in the manual?
Questions and answers