1. Manuals
  2. Brands
  3. JK Manuals
  4. Tanning Beds
  5. 164
  6. Operating instructions manual

JK 164 Operating Instructions Manual

Hide thumbs Also See for 164:
Table of Contents

Advertisement

Quick Links

Download this manual
Operating instructions
Model-No.: JK 164 / 50-4 HLT-3 TT
JK 164 / 50-4 HLT-3
1027974-00 / us-en /
B
10
.2022

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 164 and is the answer not in the manual?

Questions and answers

Related Manuals for JK 164

Summary of Contents for JK 164

  • Page 1 Operating instructions Model-No.: JK 164 / 50-4 HLT-3 TT JK 164 / 50-4 HLT-3 1027974-00 / us-en / .2022...
  • Page 2 Contact information Contact information Customer Service JK Products & Services 411 West Washington Avenue Suite B Jonesboro, Arkansas 72401 800-445-0624 870-935-9046 http://jkproducts.us/service Manufacturer JK-Products GmbH Rottbitzer Str. 69 53604 Bad Honnef GERMANY Tel.: +49 (0) 22 24 / 818-140 Fax: +49 (0) 22 24 / 818-166 WARNING! Read these operating instructions.

  • Page 3: Table Of Contents

    Table of Contents Table of Contents What certain words and signs mean (Glossary)....7 Definitions ................. 7 Warning signs ................8 Symbols on the device ............10 What this device is ............12 Guidelines................12 Export ..................12 Scope of delivery ..............12 3.3.1 Optional ...................
  • Page 4 Table of Contents What you must do to avoid other harm......37 General ..................37 Tanning system ..............37 Sensor ..................37 Vibra Shape (vibration plate) ..........37 Foreseeable misuse ............... 38 Obligations of the studio operator ........38 Staff training ................38 Risks of using this device ..........
  • Page 5 – Electromagnetic interference ......96 16.1.4 Table 206: Recommended safe distances between portable and mobile HF communications equipment and Model-No.: JK 164 / 50-4 HLT-3 TT / JK 164 / 50-4 HLT-3 ..... 97 10/2022 1027974-00B Operating instructions – 5/106...
  • Page 6 Table of Contents JK-Products, Inc. – Limited Warranty ....... 98 17.1 Limited Acrylic Warranty ............99 17.2 Warranty Claims ..............100 17.2.1 Policy & Procedures ............. 100 17.2.2 Labor Warranty Claim/Credit Procedures ......101 17.2.3 Quality inspection and acceptance form ......101 17.3...

  • Page 7: What Certain Words And Signs Mean (Glossary)

    Authorized to perform maintenance and repairs such as replacement of ballast, framed acrylic, electronic circuit boards, and other electrical components. Level 3 Authorized and trained to utilize JK Products proprietary diagnostic software to adjust operating parameters and perform detailed diag- nostics. Level 4...

  • Page 8: Warning Signs

    What certain words and signs mean (Glossary) Warning signs Danger notices, nonobservance will lead to death or serious injury: DANGER! Type and source of danger, e.g. 'DANGER – High voltage!' Description of the consequences, e.g. 'You can be killed or injured by an electric shock!' Countermeasures: –...
  • Page 9 What certain words and signs mean (Glossary) Caution notices, nonobservance can lead to less than serious injury or damage of property. CAUTION! Unauthorized lamps! The word 'Caution' together with the warning sign points out that less than serious injury can be ex- pected here.

  • Page 10: Symbols On The Device

    What certain words and signs mean (Glossary) Symbols on the device The following symbols are displayed on the device or on the packag- ing: Manufacturer, company address Type BF applied part Production year, month and day Quantity Article Number/Reference Number Serial Number Unique Device Identification Unique Device Identification...
  • Page 11 What certain words and signs mean (Glossary) This side up. Keep dry. Temperature limitations. The temperature limits are noted next to the upper and lower horizontal line. Recyclable material. Polystyrene Cardboard Mixed paper Steel Wood Permitted air pressure during transport and storage. 10/2022 1027974-00B Operating instructions –...

  • Page 12: What This Device Is

    What this device is What this device is Guidelines This product is in conformity with the performance standards for sun- lamp products under 21 CFR 1040.20, FDA and listed with ETL to UL STD 482. Export This device is exclusively intended for use in the USA and may not be exported to other countries and operated there! The manufacturer as- sumes no liability whatsever in the event of non-compliance.

  • Page 13: Device Description

    What this device is Device description 1. Adjustable air nozzles – Facial cooling 2. Facial tanner (SPECTRA LED Boards + low pressure lamps) 3. Cinematic Sound with Voice Guide and Bluetooth® (Option) 4. Smartphone wireless charging station (QI), (Option) 5. Acrylic panel base 6.

  • Page 14: Options

    What this device is Options 1. Central exhaust air socket Exhaust air (Option) As an optional comfort feature, your device can be equipped with an exhaust duct which allows the warm air from the device to be ducted outside of the room or building. Doing so can be an effective way in some climates to reduce the energy costs associated with Air condi- tioning while at the same time increasing not only user comfort, but the environmental comfort of the entire studio as well.

  • Page 15: Function Description

    What this device is Function description Tanning system The primary technical components of sunlamp products are artificial sources of UV radiation as well as a mechanical structure with a de- fined active surface. UV lamps emit different UV-A and UV-B propor- tions of the UV radiation.

  • Page 16: Installation Location

    What this device is Installation location This sunlamp product is suitable for tanning salons, fitness studios or similar installation locations. You may find detailed information on installation and setting up in the Installation Instructions (see folder Technical Documentation). 3.8.1 Ventilation NOTICE Danger of failure! Danger of overheating by obstruction of the air routing.
  • Page 17 What this device is CAUTION! Danger of overheating by obstruction of the air routing! Any liability is excluded in case of damage or injury proven to be the result of the use of non-genuine spare parts. Use of non-compliant lamps voids warranty and risks injury! –...

  • Page 18: Commissioning

    If the device has not been operated or serviced for a period of one year or longer, it must first be inspected by a (Level 3) JK Factory Cer- tified Technician before being put back into operation. Failure to do so may result in personal injury or property damage.

  • Page 19: Signs And Stickers On The Device

    What this device is Signs and stickers on the device Signs which warn of danger areas or give important information on components are attached to the device. Ensure that the instruction signs are always clearly recognizable and easily legible. Any missing instruction signs or stickers must be replaced.
  • Page 20 What this device is 1: Name plate (example) The name plate is attached to the interior side of the canopy. It con- tains important information for identifying the device (e. g. the serial number = Serial-No.) and the conformity mark. 2: UDI plate (example) 3: Sticker (1014367-..) 4: Sticker 'Follow Operating Instructions' (1014232-..)
  • Page 21 What this device is 5: Warning sticker UV radiation (801140-..) 6: Sticker EMERGENCY OFF (1512131-..) The sticker is mounted at the head end on the inside of the canopy. This sticker also includes the language form 1018688-.. (see Tech- nical Documentation folder). 7: Sticker (843319-..) Not applicable for this device.
  • Page 22 What this device is 8: Exposure label 1028276-.. The sticker is mounted on the lamp cover foot end. 9: Age warning label (1508746-..) The sticker is mounted on the front panel. 10: 'Remove lattice' sticker (842971-..) The sticker is located at the rear on top of the air outlet. 22/106...
  • Page 23 What this device is 11: AQUA MIST sticker (801211-..) The sticker is mounted under the tray. 12: OEM parts sticker (801138-..) The sticker is mounted on the bottom of the bed base. 13: Air conditioning sticker (1002243-..) The sticker is mounted on the Air conditioning. 10/2022 1027974-00B Operating instructions –...
  • Page 24 What this device is 14: Ballast support warning sticker (1514690-..) The sticker is mounted on the power unit support. 24/106...
  • Page 25 What this device is 15: Sticker ESD/Aquamist (1000791-..) The sticker is mounted on the bracket of the AQUA / AROMA SYSTEM. 16: Canada warning sticker (801371-..) The sticker is mounted on the rear panel. 10/2022 1027974-00B Operating instructions – 25/106...
  • Page 26 What this device is 17: USA mains connection sticker (1511458-..) The sticker is mounted on the left side panel. 18: Sticker ESD (85662-..) The sticker is mounted on several places in the device. 19: Sticker CONDENSATE (84547-..) This sticker is attached to the condensation tank. 20: Sticker Blue LED risk group 2 ( 1020652-..) Not applicable for this device.

  • Page 27: Technical Data

    What this device is 3.10 Technical data 3.10.1 Power rating, electrical specifications and noise level Model-No.: JK 164 / 50-4 HLT-3 Power consumption rating without Air condi- tioning: 12,200 W Rated frequency: 60 Hz Rated voltage: 230 V 3 phase...
  • Page 28 What this device is Model-No.: JK 164 / 50-4 HLT-3 TT Power consumption rating with Air condition- ing: 14,600 W Rated frequency: 60 Hz Rated voltage: 230 V 3 phase 230 V 2 phase Rated overcurrent protection device: 50 amp 3-pole*...

  • Page 29: Dimensions

    What this device is 3.10.2 Dimensions Model-No.: JK 164 / 50-4 HLT-3 TT / JK 164 / 50-4 HLT-3: B + = 56 9/13 in 1,440 mm 56 3/10 in 1,430 mm B - = 56 43/70 in 1,438 mm...

  • Page 30: Lamp Configuration

    What this device is 3.10.3 Lamp configuration NOTICE The use of other lamps voids the operating license! Model-No.: JK 164 / 50-4 HLT-3 TT / JK 164 / 50-4 HLT-3 Lamp set Number Length Power Control Order-no. Low-pressure lamps 12 3/16 in (0.31 m) 8 W 8 W / 0 W 1514801-..

  • Page 31: Not Applicable For This Device

    What this device is 3.10.4 Not applicable for this device 3.10.5 Spare parts Model-No.: JK 164 / 50-4 HLT-3 TT / JK 164 / 50-4 HLT-3: Number Description Order-no. Partition 1513266-.. Filter 52104-.. Filter – (only for devices with Air conditioning) Filter 51937-..

  • Page 32: Why You Use It

    Why you use it Why you use it Intended use This sunlamp product is intended exclusively for aesthetic tanning of the human skin, for one person at a time, at the age of 18 or above. Skin condition You may benefit from the use of this device if you tan in natural sunlight (skin types III, IV and V), ...

  • Page 33: Who Cannot Use It

    Who cannot use it Who cannot use it Prohibited usage 5.1.1 Tanning system WARNING! Danger through ultraviolet radiation! Danger of skin and eye injuries or skin diseases! – Please observe the following instructions. The following people must not use the device: People under 18 years of age ...

  • Page 34: What You Must Do To Avoid Serious Harm

    What you must do to avoid serious harm What you must do to avoid serious harm General DANGER – HIGH VOLTAGE! You can be killed or injured by an electric shock! Assembly and electrical connection must comply with national and local regulations. –...

  • Page 35: Tanning System

    What you must do to avoid serious harm Tanning system WARNING! Unprotected tanning may result in eye injury and eye diseases! The unprotected eye can become inflamed on the surface, and in certain cases the retina can be dam- aged by excessive radiation. Cataracts can form af- ter repeated exposure to radiation.

  • Page 36: Sensor

    What you must do to avoid serious harm WARNING! This device emits electromagnetic fields! EM-Emission inside device: – 5 Hz – 2 kHz max. 2.1 μT (1.5 kV/m) 2 kHz – 400 kHz max. 3.3 μT (1.3 kV/m) 9 kHz – 30 MHz max.

  • Page 37: What You Must Do To Avoid Other Harm

    What you must do to avoid other harm What you must do to avoid other harm General WARNING! Infections can be transferred through skin contact. All items/equipment components, with which the user can come into contact during tanning, must be disinfected after every tanning session: –...

  • Page 38: Foreseeable Misuse

    What you must do to avoid other harm Foreseeable misuse The following uses of the device are explicitly prohibited: Only one person at a time may use the device.  People with body weight of more than 330 lb (150 kg) may not use ...

  • Page 39: Risks Of Using This Device

    Risks of using this device Risks of using this device WARNING! Danger through ultraviolet radiation! Danger of skin and eye injuries or skin diseases! – Please observe the following instructions. This sunlamp product must not be used on individuals who have ...

  • Page 40: Benefits Of Using This Device

    Benefits of using this device Benefits of using this device The primary technical components of sunlamp products are artificial sources of UV radiation as well as a mechanical structure with a de- fined active surface. UV lamps emit different UV-A and UV-B propor- tions of the UV radiation.

  • Page 41: How To Decide To Use This Device

    How to decide to use this device How to decide to use this device This device is intended only for commercial use and not for private use. Some people are not permitted to use the device, see chapter 5. The device may not be used by people with reduced physical, sensory or mental capabilities or who have insufficient experience and/or knowledge without supervision.

  • Page 42: What To Do Before The Treatment

    What to do before the treatment What to do before the treatment Please check for any conditions that may prohibit the use of this de- vice – see chapters 5, 6, 8, 10. Make-up in the tanning device Please do not wear make-up. Clean skin absorbs UV light better. A wide variety of materials is found in cosmetics.

  • Page 43: How To Use This Device

    How to use this device How to use this device 12.1 How to set this device up After commissioning and cleaning/disinfection, the device is ready for operation. Via the PROFESSIONAL SETUP MANAGER the comfort settings can be made before starting the device. During the tanning session, func- tions may be activated or deactivated via the INTERIOR DISPLAY in- side the device.

  • Page 44: How To Choose Correct Treatment Regimen

    How to use this device 12.4 How to choose correct treatment regimen 12.4.1 Skin types Skin type I (Sensitive): Invariably gets sunburn, accepts little natural sunlight and does not tan. Skin type II (Fair): Gets sunburn easily and severely, tans minimally or lightly and peels. Skin type III (Average): Often referred to as “Average”...

  • Page 45: How To Operate The Device

    How to use this device 12.5 How to operate the device 12.5.1 Professional Setup Manager 1. Application type: SENSITIVE 2. Application type: MEDIUM 3. Application type: INTENSIVE 4. Setup (Comfort Settings) 5. BEAUTY LED´s 6. Bluetooth® Connect (Audio System coupling) 10/2022 1027974-00B Operating instructions –...
  • Page 46 How to use this device NOTE! If video option is activated: In order to interrupt or end the video, briefly touch the PROFESSIONAL SETUP MANAGER. More information on the Video Option can be found in the PROFES- SIONAL SETUP MANAGER (order no. 1028366-..). Navigation Before starting the device, the comfort settings can be selected in ad- vance in PROFESSIONAL SETUP MANAGER (order no.

  • Page 47: User Settings Overview

    How to use this device 12.5.2 User settings overview COMFORT SETTINGS – User Profil Icon selection / Description / Display Information Key sequence Back arrow: touching the arrow takes Back to the standard display you back to the previous interface from any function;...
  • Page 48 How to use this device Icon selection / Description / Display Information Key sequence VOICE GUIDE (ON / OFF) Moving the slider switches the function on or off. Fan (face/body fan) The fans for the face and body can be adjusted separately.
  • Page 49 How to use this device NFC CONNECT NFC-Point Data exchange via contactless near field communica- tion – individual settings can be stored on a NFC me- dium (e.g. NFC tag) and called up again during the next session. Information about the setting options can be found in the separate user manual 'PROFESSIONAL SETUP MANAGER' in the folder Tech- nical Documentation.

  • Page 50: Functions

    How to use this device 12.6 Functions INTERIOR DISPLAY in standby NOTICE: If no application type is selected before the session, the user may select the desired tanning program in the INTERIOR DISPLAY. Further information on the application types: see chapter '12.7Selec- tion of the application' on page 54.

  • Page 51: Navigation

    How to use this device 12.6.1 Navigation Via the COMFORT SETTINGS and the INTERIOR DISPLAY the comfort settings can be made before starting the device. During the tanning session, functions may be activated or deactivated via INTERIOR DIS- PLAY inside the device. INTERIOR DISPLAY 1.

  • Page 52: Description

    How to use this device 12.6.2 Description Icon selection / Description / Display Information Key sequence START Switch the Lamps and LED´s on. STOP Switch the Lamps and LED´s off during tanning. If the lamps and LED´s are switched off during tanning, the tanning time continues to run.
  • Page 53 How to use this device Icon selection / Description / Display Information Key sequence BEAUTY LIGHT Switch off the SPECTRA LED Boards facial tanner, press the minus button for 3 seconds, adjust the facial tanner, levels 0–3 Switch off the low-pressure lamps, press the minus button for 3 seconds, adjust the low-pressure lamps, levels 0–3 Adjust the LED RED, levels 0–3...

  • Page 54: Selection Of The Application

    How to use this device 12.7 Selection of the application Before the session begins, the desired application type must be se- lected. There are 3 possible selections: INTENSIVE:  100% power of UV- and Genesis Type R HYBRID Performance and facial tanner MEDIUM: ...

  • Page 55: Connections

    How to use this device 12.11 Connections WARNING! Danger of hearing damage! Using earphones or headphones at high volume can result in permanent hearing damage. – Do not set the volume too high. 12.11.1 Couple with Bluetooth® devices The user can connect their own private MP3 player or smartphone with Bluetooth®...
  • Page 56 How to use this device NOTE: The tanning device can store a maximum of ten coupled Bluetooth® devices. In the event of re- coupling the tanning device must first be deleted from the Bluetooth® device. The activation process must then be repeated. Activate Bluetooth®...
  • Page 57 How to use this device Successful Bluetooth® connection in the INTERIOR DISPLAY – Status display (1) when the devices have been successfully paired. NOTE: When successfully paired, the Bluetooth® symbol (1) in the INTERIOR DISPLAY lights up blue continuously. Audio sources: Bluetooth® (1) selection in the INTERIOR DISPLAY. NOTE: Only audio sources that are activated in the PROFESSIONAL SETUP MANAGER can be selected.

  • Page 58: Mp3 Player And Smartphone

    How to use this device 12.11.2 MP3 player and smartphone CAUTION! The heat might damage your MP3 player or smartphone! – Do not place the unit directly in the radiation area. NOTE: The personal use of an MP3 player during tanning is not a public broadcast in copyright terms, so that there is no obligation for registration or payment by the studio owner to the corresponding copyright...

  • Page 59: How To Use

    How to use this device 12.12 How to use NOTE: Before use the device must always be cleaned and disinfected! See chapter 12.15 How to clean/disin- fect. 12.12.1 How to start The device is started automatically with an internal or external timer. NOTE: See separate document 'Timer Control Module' #1008370-..

  • Page 60: What To Do After The Treatment

    How to use this device 12.13 What to do after the treatment 12.13.1 Cleaning and disinfection WARNING! Infections can be transferred through skin contact. All items/equipment components, with which the user can come into contact during tanning, must be disinfected after every tanning session: –...

  • Page 61: Safety Instructions For Cleaning/Disinfection And Maintenance

    How to use this device 12.14 Safety instructions for clean- ing/disinfection and mainte- nance DANGER – HIGH VOLTAGE! You can be killed or injured by an electric shock! During maintenance and service work there is a risk of touching live parts and receiving a fatal electric shock.
  • Page 62 Presetting mode – see separate document 'Profes- sional Setup Manager' #1028366-.. in the Technical Documentation folder. Please note that the device must be inspected regularly by a JK au- thorized representative every 12 months (from date of installation) to maintain its proper condition!
  • Page 63 How to use this device Acrylic panel NOTICE Cosmetics may cause cracks to form on the surface! Over the long-term cosmetics or sunscreens cause damage (e.g. crack formation on the surface). – Ensure that cosmetics and sunscreens are removed before tan- ning.

  • Page 64: How To Clean/Disinfect

    How to use this device 12.15 How to clean/disinfect WARNING! Infections can be transferred through skin contact. All items/equipment components, with which the user can come into contact during tanning, must be disinfected after every tanning session: – Protective goggles –...

  • Page 65: Cleaning And Disinfection Of Surfaces

    How to use this device 12.15.1 Cleaning and disinfection of surfaces Acrylic panel NOTICE Do not rub with a dry cloth – danger of scratching! – Other cleaning agents, especially concentrated disinfectants or solvents (e.g. Lysoform, ethyl alcohol or other liquids containing alcohol) must never be used for cleaning.

  • Page 66: Cleaning/Disinfection Plan

    How to use this device 12.15.2 Cleaning/disinfection plan Component Interval Activity See page Adjustable air nozzles Clean and disinfect 2, 16, 17 Acrylic panel Clean and disinfect INTERIOR DISPLAY Clean and disinfect EXTERIOR PANEL Clean and disinfect Protective goggles Clean and disinfect Condensate tank Empty Body cooling air nozzles, foot end...

  • Page 67: How To Maintain

    The following maintenance activities shall be performed by the studio operator or a (Level 1) JK Factory Certified Technician. The following items are considered consumables and should be re- placed as noted. Replacement of these components helps ensure con- tinued performance of the device.
  • Page 68 How to use this device Maintenance performed by the studio operator or a JK Factory Certified Technician Component Interval Activity See page AQUA SYSTEM Replace 85, 86 (only for devices with AQUA SYSTEM) AROMA canister Replace (only for devices with AROMA SYSTEM)

  • Page 69: Cleaning And Maintenance Work Preparation

     Once the age of the device reaches ten (10) years from the date of manufacture, its condition must be assessed by a (level 4) JK Factory Certified Technician before use of the device can be continued. Failure to have this device assessment performed may result in per- sonal injury or property damage.
  • Page 70 How to use this device The service kit is fitted on the inside of the front panel. – Opening the bed base: see page 73. – Remove service kit from support. – Use the cushion as scratch prevention when opening the canopy panel.
  • Page 71 How to use this device – Remove the lamp covers at the head end. – Remove the partition. – Remove the lamp cover at the foot end. – Fold out the supports. – Prop the partition on the supports. The assembly is the same process in reverse order. When assembling the device please note: –...
  • Page 72 How to use this device Remove the canopy panel – Turn the locks through 90°: first the outer locks, then the lock in the middle. – Support the canopy panel with one hand so that it does not fall down. –...
  • Page 73 How to use this device – Open the panel and lay it down carefully. – Re-lock the locks 90°. Open the bed base – Press the bed base gently downwards. – Release the lock at the head end. – Lift up the bed base. –...

  • Page 74: Instructions For Replacing The Lamps

    How to use this device 12.16.4 Instructions for replacing the lamps WARNING! Danger of being burned by an over-powered lamp! If the old chip card is left in the device, the new lamp set will be run at too high power and the user may suffer heavy burns! –...
  • Page 75 How to use this device NFC: Lamp replacement WARNING! Danger of being burned by an over-powered lamp! If a new lamp set is replaced without resetting the operating hours, the lamp set may be operated over-powered. This can lead to sunburn. –...
  • Page 76 How to use this device Low-pressure lamps WARNING! Danger of burns from hot lamps and device parts! If the tanning device was operated before being switched off and opened, lamps and housing parts may be hot. – Before replacing lamps or other spare parts, wait until lamps and metal parts of the device have cooled down sufficiently.

  • Page 77: Cleaning And Disinfection Of The Sensor

    How to use this device Makrolon tubes Not applicable for this device. Starter Not applicable for this device. High pressure lamps and filter panels Not applicable for this device. 12.16.5 Cleaning and disinfection of the sen- Not applicable for this device. 12.16.6 Cleaning or replacing lamps in the base...

  • Page 78: Cleaning Or Replacing The Lamps In The Side Section

    How to use this device 12.16.7 Cleaning or replacing the lamps in the side section – Removing the side section panel: see page 72. – Remove the lamp cover. Replacing the lamps: Low-pressure lamps: see page 76. – Please maintain the correct order of the Genesis Type R HYBRID Performance 200W low pressure lamps and Genesis Type U HYBRID Performance 200W low pressure lamps f: Genesis Type R HYBRID Performance 200W low pressure lamps...

  • Page 79: Cleaning Or Replacing Lamps In The Canopy

    How to use this device 12.16.8 Cleaning or replacing lamps in the canopy – Removing the canopy panel: see page 72. The following components listed in the maintenance plan are fitted in the canopy: Low pressure lamps 71 in (1.80 m) ...

  • Page 80: Cleaning Or Replacing The Interior Lights

    How to use this device 12.16.10 Cleaning or replacing the interior lights Not applicable for this device. 12.16.11 Cleaning or replacing the canopy ac- cent lighting Not applicable for this device. 12.16.12 Cleaning or replacing the front panel accent lighting Not applicable for this device.

  • Page 81: Cleaning The Canopy Filter

    How to use this device NOTICE! The device may be damaged by moisture! The cleaned filters must be dry before they are replaced. – Reinstall the cleaned and dried filters. – Close the bed base. You should hear the bed base click into place. 12.16.14 Cleaning the canopy filter –...

  • Page 82: Air Conditioning (Option): Empty The Condensation Tank And Clean The Filter

    How to use this device 12.16.16 Air conditioning (Option): Empty the condensation tank and clean the filter NOTICE Damage to the device through soiled filters and cooling fins! Regularly check the filter grill and cooling fins on the Air condition- ing system and clean if necessary.
  • Page 83 How to use this device – Clean the filter moist or dry: Dry cleaning: Vacuum cleaner (depending on the degree of soil- ing) Moist cleaning: Water and detergent – Do not clean in the dish-washer! – Remove the filter from the holder. –...
  • Page 84 How to use this device – Attach the cover. – Connect the condensation tank to the hose. – Replace the condensation tank. – Close the bed base. You should hear the bed base click into place. 84/106...

  • Page 85: Aqua / Aroma System Maintenance (Option)

    How to use this device 12.16.17 AQUA / AROMA SYSTEM maintenance (Option) The AQUA SYSTEM function sprays a fine mist of AQUA SOLAR WITH SKIN+ ADDITIVE into the interior of the device for body cooling (see 'AQUA SYSTEM PRODUCT INFORMATION', order no. 1011201-..). WARNING! Customer health hazard! Water that has been contaminated with bacteria...
  • Page 86 How to use this device – Unscrew the lid on the new canister. – Write the date on the canister. – Fit the new canister in the holder. – Close the bed base. You should hear the bed base click into place. Replacing the AQUA SYSTEM canister –...

  • Page 87: Cleaning The Air Intake Openings

    How to use this device – Screw the lid with the hose onto the new canister. – Push the hose well down so that it touches the bottom of the can- ister. – Put the canister back in the device. –...

  • Page 88: How To Store The Device

    All packaging consists of 100 % recyclable materials. Disposal of old devices The device has been manufactured using recyclable materials. The JK Products & Services will provide you with information on the content or potential hazards of the materials used. Disposal of consumable supplies Dispose of consumable supplies according to the national waste dis- posal laws and in accordance with the municipal waste regulations.

  • Page 89: What To Do When Things Go Wrong

    What to do when things go wrong What to do when things go wrong WARNING! Follow instructions! Failure to use protective eyewear may result in se- vere burns or other eye injury. If discomfort devel- ops, discontinue use and consult a physician. –...
  • Page 90 What to do when things go wrong NOTE: Occasionally, persons using the tanning device will experience a slight reddening of the skin – usually in small patches – after the second or third session. This redness is often accompanied by an itching sensation.

  • Page 91: Troubleshooting

    What to do when things go wrong 13.1 Troubleshooting Software and device malfunctions are indicated by error codes, e.g. #0701. These error codes are output to the display to simplify troubleshoot- ing: If a fault occurs, the error code flashes on the display. ...

  • Page 92: Where You Can Find Out More

    Where you can find out more Where you can find out more If you have any questions, please contact Customer Service (see page 2). 92/106...

  • Page 93: How We Studied This Device

    How we studied this device How we studied this device The system is built to the state of the art and the applicable safety regulations. We reserve the right to make technical changes which are necessary to improve the system or a system component even if they deviate from pictures and information in these instructions.

  • Page 94: Appendix

    HF emissions as per CISPR 11 Group 1 Model-No.: JK 164 / 50-4 HLT-3 TT / JK 164 / 50-4 HLT-3 uses HF power mostly for internal functions and Bluetooth®. Therefore the HF emissions are very low and it is highly unlikely that it will cause any interference to adjacent electronic equipment.
  • Page 95 Appendix 16.1.2 Table 202: Guidelines and manufac- turer's declaration – Electromagnetic interference The tanning system has been designed for use in the electromagnetic environment specified below. The device operator must ensure that it is used in such an environment. Interference IEC 60601 - Defined Electromagnetic...
  • Page 96 Model-No.: RMS in the ISM and amateur 6 V RMS in the ISM and JK 164 / 50-4 HLT-3 TT / JK 164 / 50-4 HLT-3 and radio bands amateur radio bands its cables other than the recommended safe dis-...
  • Page 97 Model-No.: JK 164 / 50-4 HLT-3 TT / JK 164 / 50-4 HLT-3 Model-No.: JK 164 / 50-4 HLT-3 TT / JK 164 / 50-4 HLT-3 has been de- signed for use in an electromagnetic environment in which the radi- ated HF interference is controlled.

  • Page 98: Jk-Products, Inc. - Limited Warranty

    JK-Products, Inc. – Limited Warranty JK-Products, Inc. – Limited Warranty JK-Products, Inc. warrants its products to be free from defects in ma- terials and workmanship under intended normal use as described in the unit's Operation and Installation Instruction, for a period of three (3) years from date of sale.

  • Page 99: Limited Acrylic Warranty

    Due to the tanning lotions, cosmetics, disinfectant and improper cleaners used on tanning surfaces that can- not be controlled by JK Products, Inc., after the first thirty (30) days of warranty period acrylic will be subject to a prorated cost to the con- sumer.

  • Page 100: Warranty Claims

    Warranty Claim will be consid- ered. 2. Where to call to place a Warranty Claim: JK-Products, Inc. is supported nationwide by an extensive dealer/dis- tributor network through whom the majority of our units are sold. These dealers/distributors are required by contract to stock sufficient parts to meet the various warranty and nonwarranty needs of their customers.

  • Page 101: Labor Warranty Claim/Credit Procedures

    JK-Products, Inc. – Limited Warranty You must comply to the instructions and warnings under chapter: 4.1 Intended use  5.1 Prohibited usage  6. What you must do to avoid serious harm  Any other use shall be considered improper. The manufacturer cannot be held liable for damage or injuries resulting from misuse.

  • Page 102: Limited Lifetime Warranty

    JK-Products, Inc. headquarters. JK Products, Inc. obligations do not include transportation charged on the shipping of new components to the customer or on the return of defective components of the manufacturer. All freight charges must be paid by the customer.

  • Page 103: Index

    Index Index Acrylic panel ................... 70 Load....................27 Air conditioning Filter ....................82 Air intake openings ................87 Air routing ....................16 Application ..................... 54 Application tips ..................59 AQUA / AROMA SYSTEM maintenance (Option) ......... 85 AQUA SYSTEM canister ................ 86 AROMA canister ..................
  • Page 104 Index Facial tanner Maintenance intervals............... 67 Filter Cleaning ..................80, 81 Filter panels .................... 78 Maintenance intervals............... 67 Foreseeable misuse ................38 Functions ....................50 Guidelines ....................12 Installation location ................16 Intended use ................... 32 Lamp configuration ................30 Lamps Control ....................
  • Page 105 Index Safety measures during maintenance work ........61 Scope of delivery..................12 Service kit ....................69 Setup location ..................16 Side section panel.................. 72 Skin condition ..................32 Skin types ....................44 Spare parts ..................... 67 Order numbers .................. 31 Staff training ..................
  • Page 106 Index 106/106...

This manual is also suitable for:

50-4 hlt-3 tt50-4 hlt-3

Table of Contents