Subscribe to Our Youtube Channel
Related Manuals for JK 70/0-30
Summary of Contents for JK 70/0-30
- Page 1 Operating instructions Model-No.: JK 70/0-30 Ergoline OPEN SUN 1050 ULTRA POWER Soltron XXL-95 SHARK 1001967-04 / us / 09.2016...
-
Page 2: Table Of Contents
Manufacturer JK-Products GmbH Köhlerhohner Straße 53578 Windhagen GERMANY Tel.: +49 (0) 22 24 / 818-140 Fax: +49 (0) 22 24 / 818-166 Customer Service JK Products & Services, Inc. #1 Walter Kratz Drive Jonesboro, AR 72401 800-445-0624 870-935-9046 http://support.jkamerica.com WARNING! Read these operating instructions. -
Page 3: Table Of Contents
Table of Contents Table of Contents What certain words and signs mean (Glossary) ......6 Definitions ..................6 Warning signs ................. 7 Symbols on the device ..............9 What this device is ..............11 Guidelines ..................11 Export .................... 11 Scope of delivery ................ - Page 4 Table of Contents Vibra Shape (vibration plate) ............31 Foreseeable misuse ..............32 Obligations of the studio operator ..........32 Staff training .................. 32 Risks of using this device ............33 Benefits of using this device ............34 How to decide to use this device ..........35 What to do before the treatment ..........
- Page 5 Where you can find out more ............. 72 How we studied this device ............73 Appendix ..................74 16.1 Model-No.: JK 70 / 0-30: EMC information ........74 16.1.1 Table 201: Guidelines and manufacturer's declaration – Electromagnetic emissions ............74 16.1.2...
-
Page 6: What Certain Words And Signs Mean (Glossary)
What certain words and signs mean (Glossary) What certain words and signs mean (Glossary) Definitions Studio operator People who provide tanning devices to users on a commercial basis. The studio operator is trained to operate and maintain the device and is responsi- ble for the orderly operation of the device as well as compliance with the maintenance intervals. -
Page 7: Warning Signs
What certain words and signs mean (Glossary) Warning signs Danger notices, nonobservance will lead to death or serious injury: DANGER! Type and source of danger, e.g. 'DANGER – High volt- age!' Description of the consequences, e.g. 'You can be killed or injured by an electric shock!' Countermeasures: –... - Page 8 What certain words and signs mean (Glossary) Caution notices, nonobservance can lead to less than serious injury or damage of property. CAUTION! Unauthorized lamps! The word 'Caution' together with the warning sign points out that less than serious injury can be expected here. Countermeasures: –...
-
Page 9: Symbols On The Device
What certain words and signs mean (Glossary) Symbols on the device The following symbols are displayed on the device: Manufacturer, production year and month Type BF applied part Follow Operating Instructions. Where there are great differences in temperature between the transport route and the installation site the device may not be put into operation im- mediately after being set up. - Page 10 What certain words and signs mean (Glossary) Polystyrene Cardboard Mixed paper Steel Wood 10/86...
-
Page 11: What This Device Is
What this device is What this device is Guidelines This product is in conformity with the performance standards for sunlamp products under 21 CFR 1040.20, FDA and listed with ETL and CAN/CSA 22.2 No. 224. Export This device is exclusively intended for use in the USA and Canada and may not be exported to other countries and operated there! The manufacturer assumes no liability whatsoever in the event of non-compliance. -
Page 12: Device Description
What this device is Device description 07670 / 3 1. Adjustable air nozzles – Facial cooling 2. Operating panel 3. Face tanner (UV high-pressure lamps) 4. Basic sound (optional) 5. Acrylic panel base 6. Front panel with air inlet and accent lighting 7. -
Page 13: Options
What this device is Options 07520 / 1 1. 90° pipe bend 100001292 2. Exhaust air pipe 703624-.. 3. Ambient light 1500830-.. 4. Basic sound 100001089 Function description The primary technical components of a tanning device are an artificial source of UV radiation, a variety of filters and reflectors as well as a mechanical structure with a defined active surface. -
Page 14: Transport
What this device is Transport Installation location You may find detailed information on installation and setting up in the Installa- tion Instructions (see folder Technical Documentation). 3.8.1 Ventilation NOTICE Danger of failure! Danger of overheating by obstruction of the air routing. –... -
Page 15: Setup Location
What this device is 3.8.2 Setup location WARNING! Sudden movements and malfunctions! Crushing hazard. – The device is not suitable for operation in mobile facili- ties (ships, buses, trains). Adaptation of the unit is re- quired in order to guarantee trouble-free operation when used in mobile facilities. -
Page 16: Environmental Conditions
What this device is NOTICE Damage to the device possible! The device is not to be used outdoors. Environmental conditions Optimum ambient temperature: Between 59 °F (15 °C) and 77 °F (25 °C) Storage temperature: Between 5 °F (-15 °C) and 140 °F (+60 °C) ... -
Page 17: Signs And Stickers On The Device
What this device is Signs and stickers on the device Signs which warn of danger areas or give important information on compo- nents are attached to the device. Ensure that the instruction signs are always clearly recognizable and easily legible. Any missing instruction signs or stick- ers must be replaced. - Page 18 What this device is 3: Standards 4: Sticker 'Follow Operating Instructions' (1014232-..) 5: Exposure label The sticker is located in the middle of the side section. 18/86...
- Page 19 What this device is 6: Warning sticker UV radiation (801559-..) 7: Name plate (example) The name plate is attached to the interior side of the canopy. It contains im- portant information for identifying the device (e. g. the serial number = Serial- No.) and the conformity mark.
- Page 20 What this device is 11: USA mains connection sticker (801046-..) The sticker is mounted on the rear panel at the left. 12: Warning foot fan (1014368-..) The sticker is located on the backside of the body fan. 13: Fan warning sticker (1505394-..) 20/86...
- Page 21 What this device is 14: Canada warning sticker (801371-..) The sticker is mounted on the rear panel. 15: Sticker back wall (1000563-..) The sticker is mounted on the rear panel. 16: Spring warning sticker (1014118-..) 09/2016 1001967-04 Operating instructions – 21/86...
-
Page 22: Technical Data
What this device is 3.10 Technical data 3.10.1 Power rating, electrical specifications and noise level Model-No.: JK 70 / 0-30 Power consumption rating: 21,500 W Rated frequency: 60 Hz Rated voltage: 230 V 3 phase 230 V 2 phase Rated fuses:... -
Page 23: Dimensions
What this device is 3.10.2 Dimensions B+= 75 3/16 in 1,910 mm H = 64 6/16 in 1,635 mm B = 71 15/16 in 1,827 mm H1 = 78 9/16 in 1,995 mm B1 = 35 7/16 in 900 mm H2 = 36 in 915 mm B2 = 7 6/16 in... -
Page 24: Lamp Configuration
Lamp set Number Description Length Power Control Order-no. UV high pressure lamps JK 60/80 EF 700 W 700 W 640 W / 500 W 13138-.. 1500980-.. Filter panels Ultra Performance 512 (blue) UV high pressure lamps JK 60/80 EF 700 W... -
Page 25: Accent Lighting
What this device is 3.10.4 Accent lighting 07542 / 1 Number Description Power Order-no. Low pressure lamp white 25 W 11122-.. Starter S10 (5-65 W) 10047-.. Low pressure lamp blue 58 W 12063-.. Starter S10 (5-65 W) 10047-.. Low pressure lamp blue 36 W 11792-.. -
Page 26: Spare Parts
What this device is 3.10.5 Spare parts 14074 / 0 Number Description Order-no. Filter 801532-.. Acrylic coverings 703851-.. Acrylic panel 1500757-.. Protective goggles 84592-.. MP3 cable 1001855-.. Allen-key 83828-.. Support 1501451-.. For more spare parts, contact Customer Service (see page 2). 26/86... -
Page 27: Why You Use It
Why you use it Why you use it Intended use This sunlamp product is intended exclusively for cosmetic tanning of the hu- man skin, for one person at a time, at the age of 18 or above. Skin condition You may benefit from the use of this device if you tan in natural sunlight (skin types III, IV and V), ... -
Page 28: Who Cannot Use It
Who cannot use it Who cannot use it Prohibited usage 5.1.1 Tanning system WARNING! UV radiation Danger of skin and eye injuries or skin diseases! The following people must not use the device: People under 18 years of age People with skin lesions or open wounds ... -
Page 29: What You Must Do To Avoid Serious Harm
What you must do to avoid serious harm What you must do to avoid serious harm General DANGER – HIGH VOLTAGE! You can be killed or injured by an electric shock! Assembly and electrical connection must comply with na- tional and local regulations. –... -
Page 30: Sensor
What you must do to avoid serious harm WARNING! Danger of ultraviolet radiation. Ultraviolet radiation - follow instructions. Failure to use protective eyewear may result in severe burns or other eye injury - if discomfort develops, discontinue use and consult a physician. –... -
Page 31: What You Must Do To Avoid Other Harm
What you must do to avoid other harm What you must do to avoid other harm General WARNING! Infections can be transferred through skin contact. All items/equipment components, with which the user can come into contact during tanning, must be cleaned and disinfected after every tanning session: –... -
Page 32: Foreseeable Misuse
What you must do to avoid other harm Foreseeable misuse The following uses of the device are explicitly prohibited: Only one person at a time may use the device. People with body weight of more than 330 lb (150 kg) may not use the ... -
Page 33: Risks Of Using This Device
Risks of using this device Risks of using this device WARNING! Danger through ultraviolet radiation! Danger of skin and eye injuries or skin diseases! This sunlamp product must not be used on individuals who have had skin cancer or have a family history of skin cancer. Persons repeatedly exposed to ultraviolet sunlamp products must be ... -
Page 34: Benefits Of Using This Device
Benefits of using this device Benefits of using this device This device serves the purpose of cosmetic tanning for one adult person with skin suitable for tanning. Different tanning results can be achieved in varying strength tanning devices. This is due to the different strength UV lamps and the different UV-A and UV- B proportions of the UV radiation. -
Page 35: How To Decide To Use This Device
How to decide to use this device How to decide to use this device This device is intended only for commercial use and not for private use. Some people are not permitted to use the device, see chapter 5. The device may not be used by people with reduced physical, sensory or mental capabilities or who have insufficient experience and/or knowledge without supervision. -
Page 36: What To Do Before The Treatment
What to do before the treatment What to do before the treatment Please check for any conditions that may prohibit the use of this device – see chapters 5, 6, 8, 10. Make-up in the tanning device Please do not wear make-up. Clean skin absorbs UV light better. A wide variety of materials is found in cosmetics. -
Page 37: How To Use This Device
How to use this device How to use this device 12.1 How to set this device up After commissioning and cleaning/disinfection, the device is ready for opera- tion. Via the Control Center the most important settings can be made before start- ing the device. -
Page 38: Tanning Times
How to use this device 12.4.2 Tanning times NOTE: The tanning times given in the table must not be exceeded! The sticker is located in the middle of the side section. 38/86... -
Page 39: How To Operate The Device
How to use this device 12.5 How to operate the device 12.5.1 Control Center Not applicable for this device. 12.5.2 User settings overview Not applicable for this device. 09/2016 1001967-04 Operating instructions – 39/86... -
Page 40: Functions
How to use this device 12.6 Functions 1. Display – Functions ... 2. START/STOP button 3. Regulating body fan (with plus and minus button) 4. Regulating facial fan (with plus and minus button) 5. Regulating facial tanner (with plus and minus button) 6. -
Page 41: Navigation
How to use this device 12.6.1 Navigation The equipment is operated using the buttons on the control element. The individual functions are selected via the buttons next to them. Switch application on and off, pause. Confirm function. This button's availability is displayed on the screen, depending on the function that has been selected. -
Page 42: Description
How to use this device 12.6.2 Description Function Pictogram selection / Description / Display Information Button sequence 2. UV lamps START/STOP The tanning time continues to run if Switches the UV lamps on / off the UV lamps are switched off during during the tanning session tanning session. -
Page 43: Connections
The user can connect their own private MP3 player or smartphone to the device. 1. Jack plug (JK Part # 4630911001-..) provided for use by the studio opera- tor (2 x 3.5 mm stereo jack plug). 2. MP3 player or smartphone connection: see the documentation from the manufacturer of the MP3 player or smartphone. -
Page 44: How To Use
How to use this device 12.12 How to use NOTE: Before use the device must always be cleaned and disinfect- ed! See chapter 12.15 'How to clean/disinfect'. 12.12.1 How to start The device is started automatically with an internal or external timer. NOTE: See separate document 'Timer Control Module' #1008370-.. -
Page 45: How To Stop
How to use this device 12.12.3 How to stop The tanning session ends automatically after the preset time has run down. The internal body cooling fan continues to run for approx. three (3) minutes to sufficiently cool the device. – To interrupt a tanning session, press and hold button START/STOP any- time during a session. -
Page 46: Safety Instructions For Cleaning/ Disinfection And Maintenance
How to use this device 12.14 Safety instructions for cleaning/ disinfection and maintenance DANGER – HIGH VOLTAGE! You can be killed or injured by an electric shock! During maintenance and service work there is a risk of touching live parts and receiving a fatal electric shock. –... - Page 47 Presetting mode – see separate instructions 'Presettings' #1011803-.. in the Technical Documentation folder. Please note that the device must be inspected regularly by a JK authorized representative every 12 months (from date of installation) to maintain its...
-
Page 48: How To Clean/Disinfect
How to use this device These occurrences are material-related and are unavoidable in processing. However, they have no significant effect on use and are therefore not accept- ed as defects. Over the course of time the acrylic panel will become discolored as a result of usage and must be replaced by customer-service personnel on a regular basis. -
Page 49: Cleaning And Disinfection Of Surfaces
How to use this device 12.15.1 Cleaning and disinfection of surfaces Acrylic panel NOTICE Do not rub with a dry cloth – danger of scratching! – Other cleaning agents, especially concentrated disinfectants or solvents (e.g. Lysoform, ethyl alcohol or other liquids containing alcohol) must nev- er be used for cleaning. -
Page 50: Cleaning/Disinfection Plan
How to use this device 12.15.2 Cleaning/disinfection plan 4 2x 4 2x 14057 / 0 Component Interval Activity See page Adjustable air nozzles Cleaning and disinfection Display unit Cleaning and disinfection Handle Cleaning and disinfection Protective goggles Cleaning and disinfection MP3 cable Cleaning and disinfection Acrylic panel... -
Page 51: How To Maintain
How to use this device 12.16 How to maintain 12.16.1 Technical modifications The device has been constructed in accordance with current safety regula- tions. The illustrations and specifications on these instructions are subject to technical modifications which are required in order to improve the device. Unauthorized modifications and changes to the device and its control unit are prohibited. - Page 52 How to use this device Maintenance performed by the studio operator Component Interval Activity See page Facial tanner UV high pressure lamps Replace Body tanner UV high pressure lamps Replace Starter accent lighting side section Replace Starter Ambient Light Replace Starter accent lighting base Replace Starter accent lighting front panel...
- Page 53 How to use this device Maintenance performed by authorized, trained and qualified staff In addition to the maintenance plan on page 51, the following items should be checked to ensure safe operation and use of your tanning system. Component Activity 1 Springs Inspect and replace as necessary Springs...
-
Page 54: Cleaning And Maintenance Work Preparation
How to use this device NOTE: If the device is in service for longer than 10 years, it must be completely overhauled by a trained service technician. 12.16.3 Cleaning and maintenance work preparation Not applicable for this device. 12.16.4 Instructions for replacing the UV high pressure lamps and filter panels WARNING! Danger of burns from hot lamps and device parts! - Page 55 How to use this device Open lamp banks NOTICE Risk of breakage and scratching Acrylic glass panels can be damaged. – Never open several banks simultaneously. NOTE: The UV high pressure lamps and filter panels of lamp banks A - E are cleaned and exchanged in the same way. Open lamp banks A, B, C CAUTION! Risk of being injured by the falling acrylic glass panel!
- Page 56 How to use this device Open lamp banks D, E – Remove the screws. 07590 / 0 – Lift up the acrylic panel. – Lift up the supports and prop the acrylic panel on them. NOTICE Risk of scratching! – Use the recesses provided on the acrylic panel.
- Page 57 How to use this device When assembling the device please note: – Remove fingerprints and other soiling carefully. Insert the positioner (lamp banks A-E) – Insert the positioner. – Turn the positioner by 90° to the right. 15171 / 0 –...
- Page 58 How to use this device NOTE: Do not interchange the filter panels. The facial tanner and the body tanner are equipped with different filter panels. Facial tanner (1): Ultra Performance 512 (blue), order no. 1500980-.. Body tanner (2): Ultra Performance 511, order no.
-
Page 59: Instructions For Replacing The Low Pressure Lamps And Starters
How to use this device – Test the safety switch to ensure that it works. The safety switch ensures that the device switches off in the event of a faulty filter panel or when a filter panel is missing. – Press the button. -
Page 60: Low Pressure Lamps
How to use this device Low pressure lamps WARNING! Danger of burns from hot lamps and device parts! If the tanning device was operated before being switched off and opened, lamps and housing parts may be hot. – Before replacing lamps or other spare parts, wait until lamps and metal parts of the device have cooled down sufficiently. -
Page 61: Cleaning And Disinfection Of The Sensor
How to use this device Starter Replace faulty starters immediately. You can recognize a faulty starter by the blackened ends of the lamps or when the lamps can no longer be started. Operating a lamp with a faulty starter significantly shortens its service life. The lamp loses power and may begin to flicker under certain circumstances. -
Page 62: Cleaning Or Replacing The Accent Lighting In The Base
How to use this device 12.16.11 Cleaning or replacing the accent lighting in the base 2 accent lights are located in the base. – Remove the screws. 07590 / 0 – Lift up the acrylic panel. – Lift up the supports and prop the acrylic panel on them. NOTICE Risk of scratching! –... -
Page 63: Cleaning Or Replacing The Front Panel Accent Lighting
How to use this device – Remove the cover. 07664 / 1 Replacing lamps: see page 60. Replacing starters: see page 61. The assembly is the same process in reverse order. 07665 / 1 12.16.12 Cleaning or replacing the front panel accent lighting One accent light is located in the front panel. - Page 64 How to use this device – Loosen the screws. NOTE: Only slightly loosen the screws in the acrylic panel. Do not unscrew them completely. 1 2 3 07645 / 0 – Remove the screws. 07646 / 0 – Lift up the acrylic panel slightly. –...
-
Page 65: Cleaning Or Replacing The Side Section Accent Lighting
How to use this device 12.16.13 Cleaning or replacing the side section accent lighting One accent light is located in the side section. – Lift up the cover and remove the bottom from the holder. 07658 / 0 – Remove the top of the cover from the guide and tilt it forwards. 07659 / 0 Replacing lamps: see page 60. -
Page 66: Cleaning Or Replacing Ambient Light (Cabin Lighting)
How to use this device 12.16.14 Cleaning or replacing Ambient Light (cabin lighting) Replacing lamps: see page 60. Replacing starters: see page 61. 12.16.15 Cleaning filter mats in the base – Remove the screws. 07590 / 0 – Lift up the acrylic panel. –... -
Page 67: Cleaning The Filter Mats In Canopy And Side Section
How to use this device – Dry or moist clean the filter mats or replace with new ones. Dry cleaning: Vacuum cleaner (depending on the degree of soiling) Moist cleaning: Water and detergent – Do not clean in the dish-washer! NOTICE 16320 / 0 The device may be damaged by moisture! -
Page 68: Cleaning The Filter Mats In Shoulder Tanner
How to use this device 12.16.17 Cleaning the filter mats in shoulder tanner Not applicable for this device. 12.16.18 Air conditioning: Empty the condensation tank and clean the filter Not applicable for this device. 12.16.19 AQUA / AROMA SYSTEM maintenance Not applicable for this device. -
Page 69: How To Store The Device
All packaging consists of 100 % recyclable materials. Disposal of old devices The device has been manufactured using recyclable materials. The JK Corpo- rate Group will provide you with information on the content or potential haz- ards of the materials used. -
Page 70: What To Do When Things Go Wrong
What to do when things go wrong What to do when things go wrong WARNING! Follow instructions! Failure to use protective eyewear may result in severe burns or other eye injury. If discomfort develops, discontinue use and consult a physician. –... -
Page 71: Troubleshooting
What to do when things go wrong 13.1 Troubleshooting Software and device malfunctions are indicated by error codes, e.g. E005. These error codes are output to the display to simplify troubleshooting: If a fault occurs, the error code flashes on the display. ... -
Page 72: Where You Can Find Out More
Where you can find out more Where you can find out more If you have any questions, please contact Customer Service (see page 2). 72/86... -
Page 73: How We Studied This Device
How we studied this device How we studied this device The system is built to the state of the art and the applicable safety regulations. We reserve the right to make technical changes which are necessary to im- prove the system or a system component even if they deviate from pictures and information in these instructions. -
Page 74: Appendix
Electromagnetic environment – Guidelines HF emissions as per CISPR 11 Group 1 Model-No.: JK 70 / 0-30 uses HF power solely for inter- nal functions. Therefore the HF emissions are very low and it is highly unlikely that it will cause any interference to adjacent electronic equipment. - Page 75 Appendix 16.1.2 Table 202: Guidelines and manufacturer's declaration – Electromagnetic interference The tanning system has been designed for use in the electromagnetic envi- ronment specified below. The device operator must ensure that it is used in such an environment. Interference immunity tests IEC 60601 - Test level Defined level Electromagnetic envi-...
- Page 76 Test level level Portable and mobile radios are not to be used at shorter distances to the Model-No.: JK 70 / 0-30 and its cables other than the recommended safe distance, which has been calculated according to the transmitting frequency are made.
- Page 77 Model-No.: JK 70 / 0-30 Model-No.: JK 70 / 0-30 has been designed for use in an electromagnetic environment in which the radiated HF interference is controlled. The operator of the device can help to reduce electromagnetic interference by maintaining...
-
Page 78: Jk-Products, Inc. - Limited Warranty
10 days after purchase to insure valid registration and coverage for potential claims. If the warranty card is not registered, proof of purchase from JK-Products, Inc. or its authorized dealer or distributor will be required prior to any consideration on warranty claims. -
Page 79: Limited Acrylic Warranty
17.1 Limited Acrylic Warranty JK Products, Inc. warrants its acrylic sheets to be free from defects in material and workmanship, under intended normal use, for a period of one (1) year from date of sale of the tanning bed. Due to the tanning lotions, cosmetics, disinfectant and improper cleaners used on tanning surfaces that cannot be controlled by JK Products, Inc., after the first thirty (30) days of warranty peri-... -
Page 80: Labor Warranty Claim/Credit Procedures
Each dealer/distributor has their own internal procedure for handling Warranty Claims and credits. NOTE: JK-Products, Inc., the manufacturer, does not involve itself in the direct handling of a Warranty Claim except where mitigat- ing circumstances apply and where required by law. -
Page 81: Limited Lifetime Warranty
This warranty is not transferable and is only applicable to the original pur- chaser named on a completed and registered warranty record at JK-Products, Inc. headquarters. JK Products, Inc. obligations do not include transportation charged on the shipping of new components to the customer or on the return of defective components of the manufacturer. - Page 82 JK-Products, Inc. – Limited Warranty 82/86...
- Page 83 JK-Products, Inc. – Limited Warranty 09/2016 1001967-04 Operating instructions – 83/86...
-
Page 84: Index
Index Index Accent lighting, Facial tanner maintenance ....62, 63, 65 maintenance intervals ... 47, 51 Acrylic panel Filter load ........22 cleaning/ Air routing ......... 14 disinfection intervals ... 50 Ambient Light, Filter mats maintenance ......66 cleaning ......66, 67 Application tips ...... - Page 85 Index Packaging ......... 69 Ventilation ......... 14 Plastic surfaces (care) ....49 Positioner ........57 Power rating ......22 Prohibited usage ....... 28 Recycling ........69 Replacing lamps low pressure lamps ..... 59 UV high pressure lamps ..54 Safety measures during maintenance work .....
- Page 86 Index 86/86...
Need help?
Do you have a question about the 70/0-30 and is the answer not in the manual?
Questions and answers