Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for DFI RPS330
Summary of Contents for DFI RPS330
- Page 1 RPS330 microATX Industrial Motherboard User’s Manual © December 23, 2024 DFI Inc.
-
Page 2: Fcc And Doc Statement On Class B
1. The changes or modifications not expressly approved by the party responsible for com- are the properties of the respective owners. pliance could void the user’s authority to operate the equipment. 2. Shielded interface cables must be used in order to comply with the emission limits. User's Manual | RPS330-Q670E/H610E... -
Page 3: Table Of Contents
USB3_5/6 & USB2_5/6 (UBJ1) ..................30 ATX Power (CN11) ......................31 System Memory ........................32 Installing the DIMM Module ..................32 Removing the DIMM Module ..................33 Expansion Slots ........................34 Installing the M.2 Module .....................34 Chapter 3 - BIOS Settings ......................36 Overview ..........................36 Main ............................37 User's Manual | RPS330-Q670E/H610E... -
Page 4: About This Manual
• To reduce the risk of electric shock, unplug the power cord before removing the sys- tem chassis cover for installation or servicing. After installation or servicing, cover the system chassis before plugging the power cord. User's Manual | RPS330-Q670E/H610E... -
Page 5: About The Package
The board and accessories in the package may not come similar to the information listed above. This may differ in accordance with the sales region or models in which it was sold. For more information about the standard package in your region, please contact your dealer or sales repre- sentative. User's Manual | RPS330-Q670E/H610E... -
Page 6: Chapter 1 - Introduction
Intel Pentium G7400TE (2 Cores, 6M Cache, 3.0 GHz); 35W ® ® Intel Celeron G6900E (2 Cores, 4M Cache, 3.0 GHz); 46W ® ® Intel Celeron G6900TE (2 Cores, 4M Cache, 2.4 GHz); 35W ® ® User's Manual | RPS330-Q670E/H610E... - Page 7 2 x USB 3.2 Gen1 PS/2 1 x PS/2 (mini-DIN-6) Display 1 x DP++ 1 x HDMI 2.0a 1 x VGA Audio 1 x Line-out 1 x Mic-in 1 x Line-in (opt. by request, MOQ required) User's Manual | RPS330-Q670E/H610E...
- Page 8 Operating: 5 to 95% RH Storage: 5 to 95% RH MTBF MECHANISM Dimensions microATX Form Factor: 244mm (9.6") x 244mm (9.6") Height PCB: 1.6mm Top Side: TBD Bottom Side: TBD STANDARDS AND Certifications CE, FCC Class B, RoHS CERTIFICATIONS User's Manual | RPS330-Q670E/H610E...
-
Page 9: Speed Support List
If a wrist strap is unavailable, establish and maintain contact with the system chassis throughout any procedures requiring ESD protection. User's Manual | RPS330-Q670E/H610E... -
Page 10: Block Diagram
Chapter 1 INTRODUCTION X Block Diagram X Dimension User's Manual | RPS330-Q670E/H610E... -
Page 11: Chapter 2 - Hardware Installation
10 11 DIMM1 AT/ATX Mode Select DIMM2 M2CN3 Power Select DIMM3 Buzzer DIMM4 M.2 E Key System Fan1 COM6 46 47 44 45 Battery S/PDIF Case Open Front Audio ESPI Header Front LAN LED ▲Line-Out ▼Mic-In User's Manual | RPS330-Q670E/H610E... - Page 12 Chapter 2 HARDWARE INSTALLATION SMBus & I2C Connector EXT-OOB Connector Front Panel SATA3 SATA2 SATA1 SATA0 ATX Power System Fan2 +12V Power User's Manual | RPS330-Q670E/H610E...
-
Page 13: Installing The Heat Sink
3. Screw tight two of the spring screws at opposite corners into the mounting holes. And then proceed with the other two spring screws. M.2 M1 Key 10 11 M.2 E Key Battery Mounting holes User's Manual | RPS330-Q670E/H610E... -
Page 14: Jumper Settings
M.2 M1 Key M.2 M1 Key 10 11 10 11 M.2 E Key M.2 E Key Battery Battery „ 1-2 On: 3V3 (default) „ 2-3 On: 3V3DU „ 1-2 On: AT Mode (default) „ 2-3 On: ATX Mode User's Manual | RPS330-Q670E/H610E... -
Page 15: M2Cn5 Power Select (Jp31)
Chapter 2 HARDWARE INSTALLATION M2CN5 Power Select (JP31) M.2 M1 Key 10 11 M.2 E Key Battery „ 1-2 On: 3V3 (default) „ 2-3 On: 3V3DU User's Manual | RPS330-Q670E/H610E... -
Page 16: Pin Assignment
Chapter 2 HARDWARE INSTALLATION X Pin Assignment SYSTEM FAN1 (J7) SYSTEM FAN2 (J22) M.2 M1 Key M.2 M1 Key 10 11 10 11 M.2 E Key M.2 E Key Battery Battery Assignment Assignment TACH TACH User's Manual | RPS330-Q670E/H610E... -
Page 17: Usb2_9 (Ubcn3)
Chapter 2 HARDWARE INSTALLATION USB2_9 (UBCN3) CPU FAN (J8) M.2 M1 Key M.2 M1 Key 10 11 10 11 M.2 E Key M.2 E Key Battery Battery Assignment Assignment 5VDU USB2_9N USB2_9P CTRL User's Manual | RPS330-Q670E/H610E... -
Page 18: Smbus & I2C Connector (J37)
SMBus & I2C Connector (J37) SATA0 (J31) M.2 M1 Key M.2 M1 Key 10 11 10 11 M.2 E Key M.2 E Key Battery Battery Assignment Assignment Assignment 3V3DU SMB_CLK_ SMB_DATA_RESUME RESUME SMBALERT_PCH- I2C2_SCL I2C2_SDA I2C2_INT User's Manual | RPS330-Q670E/H610E... -
Page 19: Sata1 (J32)
Chapter 2 HARDWARE INSTALLATION SATA1 (J32) SATA2 (J17) M.2 M1 Key M.2 M1 Key 10 11 10 11 M.2 E Key M.2 E Key Battery Battery Assignment Assignment User's Manual | RPS330-Q670E/H610E... -
Page 20: Sata3 (J23)
Chapter 2 HARDWARE INSTALLATION SATA3 (J23) Front Panel (J18) M.2 M1 Key M.2 M1 Key 10 11 10 11 M.2 E Key M.2 E Key Battery Battery Assignment Assignment Assignment V_SUS_LED V_SUS_LED HDD_LED SUS_LED SYS_RST- PWR_BTN- User's Manual | RPS330-Q670E/H610E... -
Page 21: Espi Header (J35)
M.2 M1 Key 10 11 10 11 M.2 E Key M.2 E Key Battery Battery Assignment Assignment 3V3SB ESPI_CLK ESPI_RESET# Assignment Assignment ESPI_ALT# GPI_SPI_SW SPI_SI-R ESPI_D0 SPI_SO-R SPI_CLK-R ESPI_D1 ESPI_CS SPI_CS0- ESPI_D2 3V3SB 3V3DU ESPI_D3 3V3SB User's Manual | RPS330-Q670E/H610E... -
Page 22: Com2 (Tsj2)
10 11 10 11 M.2 E Key Battery M.2 E Key Battery Assignment MDCD-/RS422_RX+/RS485_Data+ MSIN-/RS422_RX-/RS485_Data- Assignment Assignment MSO-/RS422_TX+ MDTR-/RS422_TX- MDCD- MSIN- MSO- MDTR- MDSR- MDSR- MRTS- MRTS- MCTS- MCTS- MRI- ---- MRI- (With 5V/12V by BIOS options) User's Manual | RPS330-Q670E/H610E... -
Page 23: Com4 (Tsj4)
M.2 M1 Key 10 11 10 11 M.2 E Key M.2 E Key Battery Battery Assignment Assignment Assignment Assignment MDCD- MSIN- MDCD- MSIN- MSO- MDTR- MSO- MDTR- MDSR- MDSR- MRTS- MCTS- MRTS- MCTS- MRI- ---- MRI- ---- User's Manual | RPS330-Q670E/H610E... -
Page 24: Com6 (Tsj6)
Case Open (SOJ1) COM6 (TSJ6) M.2 M1 Key M.2 M1 Key 10 11 10 11 M.2 E Key M.2 E Key Battery Battery Assignment Assignment Assignment MDCD- MSIN- Case Open# MSO- MDTR- MDSR- MRTS- MCTS- MRI- ---- User's Manual | RPS330-Q670E/H610E... -
Page 25: Dio (4 In 4 Out) (J34)
DIO (4 IN 4 OUT) (J34) M.2 M1 Key M.2 M1 Key 10 11 10 11 M.2 E Key M.2 E Key Battery Battery Assignment Assignment DI_3 DI_2 DI_1 DI_0 DO_3 DO_7 DO_2 DO_6 DO_1 DO_5 DO_0 DO_4 User's Manual | RPS330-Q670E/H610E... -
Page 26: S/Pdif (Auj1)
Chapter 2 HARDWARE INSTALLATION OOB I2C Connector (J39) S/PDIF (AUJ1) M.2 M1 Key M.2 M1 Key 10 11 10 11 M.2 E Key M.2 E Key Battery Battery Assignment Assignment Assignment SPDIF OUT SIO_SCL SIO_SDA SPDIF IN User's Manual | RPS330-Q670E/H610E... -
Page 27: Front Audio (Auj2)
Front LAN LED (ETJ2) M.2 M1 Key M.2 M1 Key 10 11 10 11 M.2 E Key M.2 E Key Battery Battery Assignment LED_SPEED_2500# Assignment Assignment LED_SPEED_1000# MIC2_L GBE_LED_LINK_ACT# MIC2_R 3V3DU LINE2_R MIC_JD LED_SPEED_2500#2 LED_SPEED_1000#2 LINE_L LINE_JD GBE_LED_LINK_ACT#2 3V3DU User's Manual | RPS330-Q670E/H610E... -
Page 28: Usb2_12/13 (Ubj3)
USB2_12/13 (UBJ3) M.2 M1 Key M.2 M1 Key 10 11 10 11 M.2 E Key M.2 E Key Battery Battery Assignment Assignment Assignment Assignment 5VDU 5VDU 5VDU 5VDU USB2_12N USB2_13N USB2_10N USB2_11N USB2_12P USB2_13P USB2_10P USB2_11P User's Manual | RPS330-Q670E/H610E... -
Page 29: Usb2_5/6 (Ubj4)
USB2_14 (UBJ5) USB2_5/6 (UBJ4) M.2 M1 Key M.2 M1 Key 10 11 10 11 M.2 E Key M.2 E Key Battery Battery Assignment Assignment Assignment Assignment 5VDU 5VDU 5VDU 5VDU USB2_14N USB2_5N USB2_6N USB2_14P USB2_5P USB2_6P User's Manual | RPS330-Q670E/H610E... -
Page 30: Power (Cn8000)
10 11 M.2 E Key M.2 E Key Battery Battery Assignment Assignment Assignment 5VDU USB3_RX5N GND_1 USB3_RX5P GND_2 USB3_TX5N USB3_TX5P GND_3 USB2_5N GND_4 USB2_5P Reserve 5V/GND USB2_6P USB2_6N 12V_1 USB3_TX6P 12V_2 USB3_TX6N 12V_3 USB3_RX6P USB3_RX6N 5VDU 12V_4 User's Manual | RPS330-Q670E/H610E... -
Page 31: Atx Power (Cn11)
ATX Power (CN11) Assignment Assignment 3.3V_1 3.3V_2 GND1 5V_1 GND2 5V_2 M.2 M1 Key GND3 5VSB 12V_1 12V_2 3.3V_3 10 11 3.3V_4 -12V GND4 PSON# GND5 GND6 M.2 E Key GND7 Battery 5V_3 5V_4 5V_5 GND8 User's Manual | RPS330-Q670E/H610E... -
Page 32: System Memory
DIMMs. Not all slots need to be populated. Dual Channel (DC) DIMM4 Data will be accessed in chunks of 128 bits from the memory channels. Dual channel provides better system performance because it doubles the data transfer rate. User's Manual | RPS330-Q670E/H610E... -
Page 33: Removing The Dimm Module
Hold the card by its edges and remove it from the slot. The tabs snap automatically to the edges of the card and lock the card in place. Step 1 Step 1 Step 2 Step 2 Step 3 Step 3 User's Manual | RPS330-Q670E/H610E... -
Page 34: Expansion Slots
4. Make sure the notch on card is aligned to the key on the socket. 5. Make sure the standoff screw is removed from the standoff. 10 11 M.2 Module M.2 Socket M.2 E Key Stand-off Notch Battery M.2 E-Key M.2 M1-Key M.2 M2-Key User's Manual | RPS330-Q670E/H610E... - Page 35 Screw tight the card onto the stand-off with a screw driver and a stand-off screw until the gap between the card and the stand-off closes up. The card should be lying parallel to the board when it’s correctly mounted. User's Manual | RPS330-Q670E/H610E...
-
Page 36: Chapter 3 - Bios Settings
When “X” appears on the left of a particular field, it indicates that a submenu which contains additional options are available for that field. To display the submenu, move the highlight to that field and press <Enter>. User's Manual | RPS330-Q670E/H610E... -
Page 37: Main
The time format is <hour>, <minute>, <second>. The time is based on the 24-hour military-time clock. For example, 1 p.m. is 13:00:00. Hour displays hours from 00 to 23. Minute displays min- utes from 00 to 59. Second displays seconds from 00 to 59. User's Manual | RPS330-Q670E/H610E... -
Page 38: Cpu Configuration
Enables this field for Windows XP and Linux which are optimized for Hyper-Threading technol- ogy. Select disabled for other OSes not optimized for Hyper-Threading technology. When dis- abled, only one thread per enabled core is enabled. Enable / Disable AES (Advanced Encryption Standard) User's Manual | RPS330-Q670E/H610E... -
Page 39: Power & Performance ► Cpu- Power Management Control
Enable/Disable processor Turbo Mode (requires EMTTM enabled too). AUTO means enabled. Configure Turbo Options Configure Turbo Options. C states Enable or disable CPU Power Management. It allows CPU to enter "C states" when it’s idle and nothing is executing. User's Manual | RPS330-Q670E/H610E... -
Page 40: Pch-Fw Configuration
MEBx Setup. This option does not disable manageability features in FW. ME Unconfig on RTC Clear When disabled, ME will not be unconfigured on RTC Clear. Firmware Update Configuration Configure Management Engine Technology Parameters. Note: The sub-menus are detailed in following sections. User's Manual | RPS330-Q670E/H610E... -
Page 41: Trusted Computing
This field is used to enable or disable BIOS support for the security device such as an TPM 2.0 to achieve hardware-level security via cryptographic keys. Pending operation To clear the existing TPM encryption, select "TPM Clear" and restart the system. This field is not available when "Security Device Support" is disabled. User's Manual | RPS330-Q670E/H610E... -
Page 42: Serial Port 1, 2 Configuration
Advanced Advanced IT8786 Super IO Configuration IT8786 Super IO Configuration ► Serial Port 1, 2 Configuration ► Serial Port 3, 4 Configuration Serial Port Serial Port Enable or disable serial port. Enable or disable serial port. User's Manual | RPS330-Q670E/H610E... -
Page 43: It8786 Super Io Configuration ► Serial Port 5, 6 Configuration
This section displays the system’s health information, i.e. voltage readings, CPU and system temperatures, and fan speed readings Smart Fan Function Smart Fan Function Setting. Case Open Enable or disable the case open detection function. Serial Port Enable or disable serial port. User's Manual | RPS330-Q670E/H610E... -
Page 44: Smart Fan Function
Chapter 3 BIOS SETTINGS Advanced Advanced IT8786 HW Monitor IT8786 HW Monitor ► Smart FAN Function ► CPU FAN Setting ► Smart FAN Function IT8786 HW Monitor ► Smart FAN Function ► SYS_FAN1 Setting User's Manual | RPS330-Q670E/H610E... -
Page 45: Smart Fan Function ► Sys_Fan 2 Setting
Fan full speed temperature limit Fan will be full speed when the temperature is higher than this limit. Fan start PWM Fan will start with this PWM value. User's Manual | RPS330-Q670E/H610E... -
Page 46: Serial Port Console Redirection ► Console Redirection Settings
Enable VT-UTF8 Combination Key Support for ANSI/VT100 terminals. Recorder Mode With this mode enbaled only text will be sent. This is to capture Terminal data. Resolution 100x31 Enables or disables extended terminal resolution Putty KeyPad Select FunctionKey and KeyPad on Putty. User's Manual | RPS330-Q670E/H610E... -
Page 47: Acpi Settings
Set the wait time in seconds to press ESC key to abort the PXE boot. Use either +/- or numeric keys to set the value. Media detect count Set the number of times the presence of media will be checked. Use either +/- or numeric keys to set the value. User's Manual | RPS330-Q670E/H610E... -
Page 48: Dfi Wdt Configuration
USB Power Control DFI WDT Configuration Server CA Configuration Watchdog Timer 5_Dual: Support system wake up from S3/S4 by USB KB&MS Enable or disable Watchdog Timer. 5V: No support system wake up from S3/S4 by USB KB&MS User's Manual | RPS330-Q670E/H610E... -
Page 49: Tls Auth Configuration
Chapter 3 BIOS SETTINGS Advanced Tls Auth Configuration Server CA Configuration Press <Enter> to configure Server CA. User's Manual | RPS330-Q670E/H610E... -
Page 50: Chipset
System Agent (SA) Configuration Please select a submenu and press Enter. The submenus are detailed in the following pages. Graphics Configuration Settings about graphic. VMD setup menu VMD Configuration Settings PCI Express Configuration : VT-d VT-d capability. User's Manual | RPS330-Q670E/H610E... -
Page 51: Pch-Io Configuration
Select one of the PCI Express channels and press enter to configure the following settings. PCI Express Configuration Settings LAN1, ASM1085, M.2-E, M.2-M2 (x4)/PCIE2, M.2-M1 (x2) SATA Configuration Control the PCI Express Root Port. SATA Device Otpions Settings HD Audio Configuration HD Audio Subsystem Configuration Settings User's Manual | RPS330-Q670E/H610E... -
Page 52: Configuration► Sata Configuration
• Disabled HDA will be unconditionally disabled. This field is used to select SATA speed generation limit: Auto, Gen1, Gen2 or Gen3. Ports • Enabled HDA will be unconditionally enabled. Enable or disable the Serial ATA port. User's Manual | RPS330-Q670E/H610E... -
Page 53: Security
Clear the database from the NVRAM, including all the keys and signatures installed in the Key Management menu. Press Enter and a prompt will show up for you to confirm. Key Management Enables expert users to modify Secure Boot Policy variables without full authentication. User's Manual | RPS330-Q670E/H610E... -
Page 54: Boot
Select this option to save BIOS configuration settings to a USB flash device. • Restore Setting from file This field will appear only when a USB flash device is detected. Select this field to restore set-ting from the USB flash device. User's Manual | RPS330-Q670E/H610E... -
Page 55: Mebx
MAC address should be burned or not. c. After updating unique MAC Address from manufacturing, NVM will be protected immediately after power cycle. Users cannot update NVM or MAC address. User's Manual | RPS330-Q670E/H610E... -
Page 56: Chapter 4 - Raid Settings
M.2 PCIe SSD cannot be used to set up a RAID set either with an M.2 SATA SSD and monitor service allow you to monitor the current status of the RAID volume and/or SATA or a SATA hard drive. drives. It enables enhanced performance and power management for the storage subsystem. User's Manual | RPS330-Q670E/H610E... -
Page 57: How To Enable Intel(R) Rapid Storage Technology In Bios
X How to enable Intel(R) Rapid Storage Technology in BIOS System Agent (SA) Configuration ► VMD Setup Menu Enable VMD Controller for more options. Save the changes and exit. Locate Intel(R) Rapid Storage Technology option on Advanced menu. User's Manual | RPS330-Q670E/H610E...
Need help?
Do you have a question about the RPS330 and is the answer not in the manual?
Questions and answers