Creone Keybox 9000 Basic Instruction Manual page 8

6. New service code
The example below shows how to program a new
service code. Note that it is important to follow the
instructions carefully as the new service code is the
most important code needed to operate KeyBox.
301042#
*99*new service code# Enter *99* to access the new
*89#
Important information!
Note that it is very important to select a service
code that will not be forgotten. To achieve maximum
security the system is configured so that without the
right service code nobody, not even the supplier, can
change codes. KeyBox then has to be reset in order to
return to the delivery setting. When a reset is carried
out all settings are restored to the delivery configura-
tion. See under chapter 11 (Reset).
9000 B series
Enter the service code that
applies on delivery. Note that
the light now starts flashing
at shorter intervals.
service code operation. Then
select new service code, e.g.
123456.
Exit service mode. Note that
the light starts flashing at
longer intervals
8