Creone Keybox 9000 Basic Instruction Manual page 38

New User
To add a new user, do following:
• Press + , in the bottom of the software
• A new user will be showed, please
highlight the user.
Now fill in the information on the right
side as follows:
• NAME – The name of the user.
• CODE – The PIN code that the user will use.
• USAGE COUNT – How many times the code
will work. If you enter 1, the code will only
work one time. If you leave the field empty,
the code will work without limitation.
• VALID FROM – VALID TO – Here you can choose
from and to which date the code shall work.
If you leave the field empty, the code will work
without limitation.
• VALID TIME OF DAY FROM – TO – If you have
entered the information above you also have to
enter time of those days.
KeyWin Light
• DOORS – Here you can see all the doors in the
system. Now choose the doors that the user shall
have access to. Press the icon on the right side to
give access or remove access to a certain door.
GREEN = Access
RED = No access
For adding more users, follow the instructions again.
To save the settings do as follows:
Press FILE and then SAVE.
Then press EXPORT, and choose the disk that the
USB-stick has, and press save. A CFG-file will be
created on the USB and this is the file that transfer all
information to the cabinet. It is important that the file
has the name CABINET.cfg otherwise it will not work.
To transfer the information to the cabinet,
see chapter 3.
38