MADER POWER SF8A607 Instructions Manual page 39

INTRODUCTION
This manual provides information on the safe use and maintenance of this product.
Every effort has been made to ensure the accuracy of the information contained in this
manual.
This manual must be kept at the disposal of all hedge trimmer users throughout the
life of the equipment.
This manual contains messages intended to alert you to potential safety
problems, damage to the hedge trimmer, as well as useful operating and
maintenance information. Please read all the information carefully to avoid
accidents and damage to the machine.
TECHNICAL DATA
Model
Cutting length:
Maximum cutting diameter:
Power:
No-load speed:
Packaging dimensions (L x W x H):
Weight:
2 x 18V – This machine needs two batteries to work properly
I
NFO
This item does not come with a battery or charger. Therefore, we recommend
using the following:
• Battery:
o 74000 – Battery 18V 2AH
o 74001 – Battery 18V 4AH
• Charger:
o 74010 – Charger 21V 1.5A
o 74011 – Charger 21V 2A
SAFETY INFORMATION
Before operating this hedge trimmer, read and observe all warnings, cautions and
instructions on the hedge trimmer and in this Owner's Manual.
NOTE: The following safety information is not intended to cover all possible conditions
and situations that may occur. Read the entire user manual for safety and operating
instructions. Failure to follow the instructions and safety information can result in
serious injury or death.
SF8A607
2 ''
28mm
36V / 40V
1550 RPM
1.126 x 0.21 x 0.204 m
3.63 Kg
38