Crux SWRSU-38E Quick Start Manual

INTERFACING SOLUTIONS
PRODUCT FEATURES:
-
PARTS INCLUDED:
SWRSU-38E Module
INSTALLATION DIAGRAM:
+12V Constant Yellow
+12V ACC Red
Ground Black
range
Antenna Turn on Blue
Amp Turn on Blue/White
Reverse Trigger Purple/White
Right Front (+) Gray
Right Front (-) Gray/Black
White
White/Black
Ground
Audio Input
Red/White RCA
(Retains Factory AUX Input)
Rear View Camera Signal Yellow RCA
(Retain OE Camera)
28 PIN
10 PIN
TO FACTORY
HARNESS
5 PIN
ANTENNA ADAPTOR
(Included in Kit)
Crux Interfacing Solutions • 21541 Nordhoff St Unit C, Chatsworth, CA 91311
R
+
RADIO REPLACEMENT
SWC RETENTION
SU-38E Harness
AFTERMARKET
10-Pin Black
Connector
5 -Pin OEM
Camera
Connector*
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
Radio Replacement with Steering Wheel Control Retention for
Select Ampli ed 2015 - 2017 Subaru Vehicles
Antenna Adapter
RADIO
AFTERMARKET
RADIO SELECTOR
(See Page 2)
Plug in the 3.5MM SWC cable to the 4-pin port
on the module. See "DIP SWITCH SETTINGS" section.
ON RADIO VEHICLE
1 2 3 4 5 6 7 8
4-Pin
Connector
*NOTE: If the factory radio does not
have a 5 pin camera connector, plug
these connectors together to retain
the factory backup camera.
1 of 4
SWRSU-38E
3.5MM to 4-pin SWC Cables
Led Light Light Display
Flashing LED
Blue LED
Solid Red LED
Red LED
Green LED Flashing when SWC pressed
SUBARU
SWC SETTING
(See Page 2)
ON RADIO VEHICLE
1 2 3 4 5 6 7 8
3.5MM SWC CABLE
Cap or insulate if
not being used
Insulate with tape
if not being used
Kenwood/JVC (BLUE / YELLOW)
Feedback
Data Transmitted
Power On
SWC Pressed
rev.091224