INVT IMS20B Series Product Manual page 6

IMS20B Series Medium Power Servo Motor Product Manual











1.5 Warning symbols
To ensure safe operation, please strictly adhere to the safety labels affixed to the
equipment. Do not damage or remove the safety labels. The warning symbols are as
follows:
Warning
symbols
Caution: high temperature on the motor surface!

Please ensure that the emergency stop switch is properly
connected to the drive.
De-couple the motor load and run the motor independently during
the trial operation to avoid accidents.
Do not touch conductive parts directly while in operation.
Do not connect or short-circuit any external cables of the motor,
especially those related to electricity, with the housing or each
other.
If you need to rewire the motor, please disconnect the power and
wait for 15 minutes before proceeding.
Set the corresponding parameters before operation, otherwise the
motor may run abnormally or beyond the expectation because of
the load.
The motor housing heat sink can reach high temperatures during
operation. Do not touch the motor housing heat sink.
Maintenance and repair
Non-professional personnel are strictly prohibited from installing,
wiring, maintaining, inspecting, or replacing components of the
equipment.
For maintenance, repair, and component replacement of the
motor, please contact a qualified technician.
Maintenance of the equipment is strictly prohibited while it is
powered on.
The components inside the motor contain heavy metals. Please
follow the relevant national regulations and standards for the
disposal of equipment and products. After disposal, the motor
must be treated as industrial waste.
Running
Scrapping
Description
3