Related Manuals for Star Lake SR200-X4-A20
Summary of Contents for Star Lake SR200-X4-A20
- Page 1 SR200-X4-A20 Intel® 9 Gen Coffee Lake Xeon® Military Rugged MXM GPU Computer User’s Manual Revision Date: Dec.09.2024...
-
Page 2: Safety Information
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 Safety Information Electrical safety To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. -
Page 3: Revision History
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 Revision History Revision Date (yyyy/mm/dd) Changes Verision 1.0 2024/12/09 Initial release at SR200-X4-A20 Packing list ■ SR200-X4-A20 Rugged Fanless System ■ CD (Driver) ■ M12 Power Cable Ordering information Model Number Description SR200-X4-A204 IP65 MIL-STD-810G Rugged Computer with Intel® 9th Gen Coffee Lake Xeon®... -
Page 4: Table Of Contents
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 Table Contents Safety Information ..........................1 Packing list ............................2 Ordering information ..........................2 Table Contents ............................3 Chapter 1: Product Introduction ......................5 Key Features ........................5 Appearance ........................6 Dimension .......................... 7 System Diagram block ...................... - Page 5 SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 3.4.12 NVMe Configuration ......................... 32 3.4.13 Network Stack Configuration ....................33 3.5 Chipset ............................34 3.5.1 System Agent (SA) Configuration ....................34 3.5.2 PCH-IO Configuration ........................36 3.5.2.1 PCI Express Configuration ......................37 3.5.2.2 SATA And RST Configuration..................... 39 3.5.2.3 Security Configuration ......................
-
Page 6: Chapter 1: Product Introduction
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 Chapter 1: Product Introduction Key Features System Intel® 9th Gen Coffee Lake Xeon® E-2276ML Processor OXY5741A-04A2 BIOS AMI UEFI BIOS Memory Type 4x DDR4 SO-DIMM 2666MHz (1x 32GB, Up to 128G) Graphic Intel® UHD Graphic 630 Chipset Intel®... -
Page 7: Appearance
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 Storage Temp -40 to 85℃ Relative Humidity 5% t0 95%, non-condensing *Specification are subject to change without notice. Cable Kit M12 Power cable Appearance... -
Page 8: Dimension
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 Dimension... -
Page 9: System Diagram Block
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 System Diagram block... -
Page 10: Chapter 2: Connector Pin Definition
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 Chapter 2: Connector pin definition 1. M12 POWER Connector: CON1 / Power Cable :CON2... -
Page 11: Chapter 3: Ami Bios Utility
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 Chapter 3: AMI BIOS UTILITY This chapter provides users with detailed descriptions on how to set up a basic system configuration through the AMI BIOS setup utility. 3.1 Starting To enter the setup screens, perform the following steps: •... -
Page 12: Advanced Menu
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 The Main BIOS setup screen has two main frames. The left frame displays all the options that can be configured. Grayed-out options cannot be configured; options in blue can. The right frame displays the key legend. Above the key legend is an area reserved for a text message. -
Page 13: Cpu Configuration
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 are defaults required by the system board, while others, if enabled, will improve the performance of your system or let you set some features according to your preference. Setting incorrect field values may cause the system to malfunction. -
Page 14: Power & Performance
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 Field Name Intel(VMX) Virtualization Technology Default Value [Enabled] Possible Value Disabled Enabled Field Name Active Processor Cores Default Value [A11] Possible Value Field Name Hyper-Threading Default Value [Enabled] Possible Value Disabled Enabled 3.4.2 Power & Performance Field Name Intel®... -
Page 15: Pch-Fw Configuration
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 Field Name Turbo Mode Default Value [Enabled] Possible Value Disabled Enabled Field Name C States Default Value [Disabled] Possible Value Disabled Enabled 3.4.3 PCH-FW Configuration Field Name ME State Default Value [Enabled] Possible Value... -
Page 16: Amt Configuration
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 Field Name AMT BIOS Features Default Value [Enabled] Possible Value Disabled Enabled 3.4.4 AMT Configuration Field Name ASF support Default Value [Enabled] Possible Value Disabled Enabled Field Name USB Provisioning of AMT Default Value... -
Page 17: Cira Configuration
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 3.4.4.1 CIRA Configuration Field Name ASF support Default Value [Enabled] Possible Value Disabled Enabled... -
Page 18: Asf Configuration
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 3.4.4.2 ASF Configuration Field Name PET Progress Default Value [Enabled] Possible Value Disabled Enabled Field Name WatchDog Default Value [Disabled] Possible Value Disabled Enabled Field Name ASF Sensors Table Default Value [DIsabled] Possible Value... -
Page 19: Secure Erase Configuration
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 3.4.4.3 Secure Erase Configuration Field Name Secure Erase mode Default Value [Simulated] Possible Value Simulated Real Field Name Force Secure Erase Default Value [Disabled] Possible Value Disabled Enabled... -
Page 20: Oem Flags Settings
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 3.4.4.4 OEM Flags Settings Field Name MEBx hotkey Pressed Default Value [Disabled] Possible Value Disabled Enabled Field Name MEBx Selection Screen Default Value [Disabled] Possible Value Disabled Enabled Field Name Hide Unconfigure ME Confirmation Prompt... -
Page 21: Mebx Resolution Settings
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 Field Name Unconfigure ME Default Value [Disabled] Possible Value Disabled Enabled 3.4.4.5 MEBx Resolution Settings Field Name Non-UI Mode Resolution Default Value [Auto] Possible Value Auto 80x25 100x31 Field Name UI Mode Resolution Default Value... - Page 22 SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 640x480 800x600 1024x768 Field Name Pending operation Default Value [None] Possible Value None TPM Clear...
-
Page 23: Trusted Computing
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 3.4.5 Trusted Computing Field Name Security Device Support Default Value [Enabled] Possible Value Disabled Enabled Field Name SHA-1 PCR Bank Default Value [Enabled] Possible Value Disabled Enabled Field Name SHA256 PCR Bank Default Value... - Page 24 SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 Field Name Platform Hierarchy Default Value [Enabled] Possible Value Disabled Enabled Field Name Storage Hierarchy Default Value [Enabled] Possible Value Disabled Enabled Field Name Endorsement Hierarchy Default Value [Enabled] Possible Value Disabled Enabled Field Name TPM2.0 UEFI Spec Version...
-
Page 25: Acpi Setting
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 3.4.6 ACPI Setting Field Name Enable ACPI Auto Configuration Default Value [Disabled] Possible Value Disabled Enabled Field Name Enable Hibernation Default Value [Enabled] Possible Value Disabled Enabled Field Name ACPI Sleep State Default Value... -
Page 26: It8786 Super Io Configuration
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 3.4.7 IT8786 Super IO Configuration 3.4.7.1 Secial Port 1 Configuration Field Name Serial Port Default Value [Enabled]... -
Page 27: Secial Port 2 Configuration
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 Possible Value Disabled Enabled Field Name COM1 Control Default Value [RS232] Possible Value Loopback RS-232 RS-485 Half Duplex RS-485/422 Full Duplex 3.4.7.2 Secial Port 2 Configuration Field Name Serial Port Default Value [Enabled] Possible Value... -
Page 28: Hardware Monitor
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 3.4.8 Hardware Monitor 3.4.8.1 Smart Fan Function... -
Page 29: System Fan Setting
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 Field Name FAN_CTL Polarity Default Value [Active high] Possible Value Active low Active high Field Name Smoothing control Default Value [4Hz] Possible Value 16Hz 3.4.8.2 System Fan Setting Field Name Smart Fan Mode Default Value... -
Page 30: Pci Subsystem Settings
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 Field Name Temperature Select Default Value [TMP IN3] Possible Value TMP IN1 TMP IN2 TMP IN3 3.4.9 PCI Subsystem Settings Field Name Above 4G Decoding Default Value [Disabled] Possible Value Disabled Enabled... -
Page 31: Usb Configuration
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 3.4.10 USB Configuration Field Name Legacy USB Support Default Value [Enabled] Possible Value Enabled Disabled Auto Field Name XHCI Hand-Off Default Value [Enabled] Possible Value Enabled Disabled Field Name USB Mass Storage Driver Support... -
Page 32: Csm Configuration
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 5 sec 10 sec 20 sec Field Name Device reset time-out Default Value [20 sec] Possible Value 1 sec 5 sec 10 sec 20 sec Field Name Device Power-up delay Default Value [Auto] Possible Value... -
Page 33: Nvme Configuration
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 Possible Value Disabled Enabled 3.4.12 NVMe Configuration... -
Page 34: Network Stack Configuration
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 3.4.13 Network Stack Configuration Field Name Network Stack Default Value [Disabled] Possible Value Disabled Enabled... -
Page 35: Chipset
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 3.5 Chipset 3.5.1 System Agent (SA) Configuration Field Name Primary Display Default Value [Auto] Possible Value Auto IGFX... - Page 36 SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 Field Name Internal Graphics Default Value [Auto] Possible Value Auto Disabled Enabled Field Name GTT Size Default Value [8MB] Possible Value Field Name Aperture Size Default Value [256MB] Possible Value 128MB 256MB 512MB 1024MB...
-
Page 37: Pch-Io Configuration
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 Field Name DVMT Total Gfx Mem Default Value [128M] Possible Value 128M 256M Field Name Above 4GB MMIO BIOS assignment Default Value [Enabled] Possible Value Enabled Disabled 3.5.2 PCH-IO Configuration... -
Page 38: Pci Express Configuration
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 3.5.2.1 PCI Express Configuration Field Name PCIe function swap Default Value [Disabled] Possible Value Disabled Enabled... - Page 39 SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 Field Name PCI Express Root Port 1 Default Value [Enabled] Field Name PCI Express Root Port 5 Default Value [Enabled] Field Name PCI Express Root Port 10 Default Value [Enabled] Field Name PCI Express Root Port 11...
-
Page 40: Sata And Rst Configuration
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 3.5.2.2 SATA And RST Configuration Field Name SATA Controller(s) Default Value [Enabled] Possible Value Enabled Disabled Field Name SATA Mode Selection Default Value [AHCI] Possible Value AHCI Intel RST Premium With Intel Optane System Acceleration Field Name M.2 Port... -
Page 41: Security Configuration
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 Field Name Port 2 Default Value [Enabled] Possible Value Disabled Enabled Field Name Port 3 Default Value [Enabled] Possible Value Disabled Enabled Field Name Port 4 Default Value [Enabled] Possible Value Disabled Enabled 3.5.2.3 Security Configuration... - Page 42 SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 Field Name BIOS Lock Default Value [Enabled] Possible Value Disabled Enabled Field Name Force unlock on all GPIO pads Default Value [Disabled] Possible Value Disabled Enabled Field Name PCH LAN Controller Default Value [Enabled]...
-
Page 43: Security
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 3.6 Security 3.6.1 Administrator Password... -
Page 44: User Password
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 3.6.2 User Password 3.6.3 Secure Boot Field Name Secure Boot Default Value [Enabled] Possible Value Disabled Enabled... -
Page 45: Restore Factory Keys
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 Field Name Secure Boot Mode Default Value [Custom] Possible Value Standard Custom 3.6.3.1 Restore Factory Keys 3.6.3.2 Key Management... -
Page 46: Install Factory Defaults
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 Field Name Factory Key Provision Default Value [Disabled] Possible Value Disabled Enabled 3.6.3.3 Install factory defaults 3.6.3.4 File System... -
Page 47: File System
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 3.6.3.5 File System 3.6.3.6 Restore DB defaults... -
Page 48: Platform Key(Pk)
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 3.6.3.7 Platform Key(PK) 3.6.3.8 Key Exchange keys... -
Page 49: Authorized Signatures
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 3.6.3.9 Authorized Signatures 3.6.3.10 Forbidden Signatures... -
Page 50: Authorized Time Stamps
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 3.6.3.11 Authorized Time Stamps 3.6.3.12 OS Recovery Signatures... -
Page 51: Boot
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 3.7 Boot Field Name Bootup NumLock State Default Value [Off] Possible Value Field Name Quiet Boot Default Value [Enabled] Possible Value Disabled Enabled Field Name Fast Boot Default Value [Disable Link] Possible Value Disable Link... -
Page 52: Save & Exit
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 3.8 Save & Exit 3.8.1 Save Changes and Exit 3.8.1.1 Save & Exit Setup... -
Page 53: Exit Without Saving
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 3.8.2 Exit without Saving 3.8.3 Save & reset... -
Page 54: Reset Without Saving
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 3.8.4 Reset Without Saving 3.8.5 Save Setup Values... -
Page 55: Load Previous Values
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 3.8.6 Load Previous Values 3.8.7 Load Optimized Defaults... -
Page 56: Save Values As User Defaults
SR200-X4-A20 User’s Manual Revision Date: Dec.09.2024 3.8.8 Save Values as User Defaults 3.8.9 Restore User Defaults...
Need help?
Do you have a question about the SR200-X4-A20 and is the answer not in the manual?
Questions and answers