Side Panel - BMW S 1000 RR Rider's Manual

tion: From in front toward the
inside of the right side panel.
Coolant, specified level
between MIN and MAX
marks on the expansion tank
If the coolant drops below the
permitted level:
Top up the coolant.
Topping up coolant
Remove the side panel
( 111).
Open cap 1 of the expansion
tank.
Top up coolant to specified
level.
Check the coolant level
( 110).
Close the cap of the expansion
tank.
Install the side panel (

Side panel

Removing side panel
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Remove screw 1 on the in-
board side of the side panel.
The procedure described
here for the right side apply
applies by analogy to the left side
panel.
112).
9
111
z