BMW S 1000 RR Rider's Manual page 116

9
112
Remove screws 2, 3 and 4.
Pull the fairing side panel at
position 5 to disengage it from
the rubber buffer and remove.
z
Disconnect plug 6.
Remove the side panel.
Installing side panel
Engage the fairing side panel in
mount 7 on the engine spoiler.
The procedure described
here for the right side apply
applies by analogy to the left side
panel.
Connect plug 6.
Seat the side panel in the rub-
ber buffer at position 5.
Install screws 2, 3 and 4.