Care Products; Washing Motorcycle; Cleaning Easily Damaged Compon; Components - BMW S 1000 RR Rider's Manual

Care products

10
BMW Motorrad recommends
that you use the cleaning and
138
care products you can obtain
from your authorised BMW
Motorrad dealer. The substances
in BMW CareProducts have been
tested in laboratories and in
practice; they provide optimised
z
care and protection for the
materials used in your vehicle.
The use of unsuitable
cleaning and care products
can damage vehicle components.
Do not use solvents such as cel-
lulose thinners, cold cleaners,
fuel or the like, and do not use
cleaning products that contain
alcohol.

Washing motorcycle

BMW Motorrad recommends
that you use BMW insect re-
mover to soften and wash off
insects and stubborn dirt on
painted parts prior to washing
the motorcycle.
To prevent stains, do not wash
the motorcycle immediately after
it has been exposed to strong
sunlight and do not wash it in the
sun.
Make sure that the motorcycle
is washed frequently, especially
during the winter months.
To remove road salt, clean the
motorcycle with cold water im-
mediately after every trip.
After the motorcycle has
been washed, ridden
through water or ridden in
the rain, the brake discs and
pads might be wet and the
brakes might not take effect
immediately.
Apply the brakes in good time
until the brake discs and brake
pads have dried out.
Warm water intensifies the
effect of salt.
Use only cold water to wash off
road salt.
The high pressure of steam
cleaners can damage seals,
the hydraulic brake system, the
electrical system, and the seat.
Do not use a steam jet or high-
pressure cleaning equipment.
Cleaning easily
damaged components
Body panels
Clean the trim panels with water
and BMW plastic care emulsion.
If plastic parts are cleaned
using unsuitable cleaning
agents, the surfaces can be dam-
aged.
Do not use cleaning agents that
contain alcohol, solvents or ab-
rasives to clean plastic parts.