Side Panel - BMW F 650 GS Manual

Side panel

1
2
44
Removing and installing
side panel
• Place the motorcycle on its
main stand [Dakar: side stand]
– Make sure the ground is
level and firm.
• Remove the seat
( Rider's Manual, Chapter 1)
b
2
4
Removing right side panel
• Remove the four securing
screws 2 holding the turn
indicator
• Remove 2 retaining screws 1
• Slacken securing screw 3
• Pull right side panel out of
locator 4 at bottom and lift it
clear of the center panel at
the top
Installing right side panel
• Installation is the reverse of
the removal procedure
3