Protective Wax Coating; Lay Up The Motorcycle; Restoring Motorcycle To Use - BMW S 1000 RR Rider's Manual

BMW Motorrad recommends
10
BMW tar remover for removing
specks of tar. Remember to wax
140
the parts treated in this way.

Protective wax coating

BMW Motorrad recommends
applying only BMW car wax or
products containing carnauba
z
wax or synthetic wax.
It is time to rewax the paint-
work when water "puddles" on
the surface, instead of forming
beads.

Lay up the motorcycle

Clean the motorcycle.
Remove the battery.
Spray the brake and clutch
lever pivots and the main and
side stand pivots with a suit-
able lubricant.
Coat bright metal and chrome-
plated parts with an acid-free
grease (e.g. Vaseline).
Stand the motorcycle in a dry
room in such a way that there
is no load on either wheel.
Before laying the vehicle
up out of use, have the en-
gine oil and the oil filter element
changed by a specialist work-
shop, preferably an authorised
BMW Motorrad dealer. Com-
bine work for laying up/restoring
to use with a BMW service or
inspection.
Restoring motorcycle
to use
Remove the protective wax
coating.
Clean the motorcycle.
Install a charged battery.
Before starting: work through
the checklist.