Esa - BMW R 1200 RT Rider's Manual

load status must be set and the
desired riding mode selected.
Three load statuses can be
set, with any of the three riding
modes available for each one.
The detailed description of the
ESA II Electronic Suspension
Adjustment system is on page
( 97).
Calling up settings
Switch on the ignition.
Press button 1 to view the cur-
rent setting.
The selected riding mode is dis-
played in panel 1 of the mul-
tifunction display and the load
status is displayed in panel 2.
The setting shows briefly, then
disappears automatically.
Setting riding mode
Start the engine.
The riding mode can be set
while the motorcycle is in
motion.
Press button 1 to view the cur-
rent setting.
Repeatedly press button 1 until
the setting you want to use
appears on the display.
The display field starts at the
current status and cycles through
the following sequence:
COMF
: comfort mode
NORM
: normal mode
SPORT
: sport mode
The setting shown on the dis-
play is automatically accepted
as the riding mode if you al-
low a certain length of time
to pass without making fur-
4
71
z