BMW R 1200 RT Rider's Manual page 124

rows on the tyre or the wheel
8
rim.
Roll the front wheel into posi-
120
tion between the forks, noting
the ABS sensor on the left-
hand side.
z
Raise the front wheel, insert
quick-release axle 2 and tight-
en to specified torque.
Quick-release axle in axle
holder
50 Nm
Tighten axle clamping screw 1
to the specified torque.
Quick-release axle clamp
screws
20 Nm
Remove the front-wheel stand.
Ease the brake calipers on to
the brake discs.
Tighten screws 2 on left and
right to the specified tightening
torque.
Brake caliper to slider
tube
30 Nm
Clip on two clips 1 holding the
sensor cable to the brake line.
Make sure that the sensor
cable is seated in holders 3
and 4.