BMW R 1200 RT Rider's Manual page 135

Press bulb 2 into its socket
and turn it counter-clockwise to
remove.
Replace the defective bulb.
Do not touch the glass of
new bulbs with your fingers.
Use a clean, dry cloth to hold
the bulbs when handling them.
Dirt deposits, in particular oil and
grease, interfere with heat radi-
ation from the bulb. This leads
to overheating and shortens the
bulb's operating life.
Bulbs for flashing turn
indicators, front
PY21W / 12 V / 21 W
Press bulb 2 into its socket
and turn it clockwise to install.
Insert bulb holder 1 into the
bulb housing and turn the bulb
holder clockwise to latch it in
position.
Installing flashing turn indicator
with fairing panel ( 133).
8
131
z