BMW R 1200 RT Rider's Manual page 132

8
128
Remove bulb 3 from the bulb
holder.
Replace the defective bulb.
z
Do not touch the glass of
new bulbs with your fingers.
Use a clean, dry cloth to hold
the bulbs when handling them.
Dirt deposits, in particular oil and
grease, interfere with heat radi-
ation from the bulb. This leads
to overheating and shortens the
bulb's operating life.
Bulb for parking light
W5W / 12 V / 5 W
Fit the bulb 3 in the bulb hold-
er.
Insert the bulb holder into the
headlight housing and turn
lever 2 clockwise to latch it in
position.
Installing flashing turn indicator
with fairing panel (
Replacing brake-light,
rear-light and rear-
indicator bulbs
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Always make sure that the
133).