Multifunction Display - BMW R 1200 RT Rider's Manual

The residual-range readout 1 in-
dicates how far you can ride with
the fuel remaining in the tank.
This reading is not displayed until
fuel level has dropped to reserve.
This distance is calculated on the
basis of fuel level and average
consumption.
When refuelling after running on
reserve, make sure that you top
up the tank to a level above re-
serve, as otherwise the sensor
will not be able to register the
new level. If the sensor can-
not register the new level the
residual-range readout cannot be
updated.
The calculated range is an
approximate value. Con-
sequently, BMW Motorrad re-
commends that you should not
try to use the full residual range
before refuelling.

Multifunction display

Adjust the dimmer
Attempting to adjust the
dimmer while riding the
motorcycle can lead to accidents.
Do not attempt to adjust the
dimmer unless the motorcycle
is at a standstill.
Switch on the ignition.
Press button 1.
The current level of dimming
appears in display field 2.
Repeatedly press button 1 un-
til the desired dimming level
appears on the display.
The brightness of the dis-
play increases one level each
time you press the button.
Each time you press the button
after maximum brightness is
reached, brightness is reduced
by one level.
4
53
z