Renewing Input Shaft Sealing Ring At Output Side; Renewing Shaft Sealing Ring For Selector Drum; Renewing Sealing Ring For Selector Shaft - BMW R 1200 C Repair Manual

Renewing input shaft sealing ring at output side

•
Pierce the shaft sealing ring with piercing tool,
BMW No. 00 8 583.
•
Screw the pull rod, BMW No. 00 8 581, into the
pierced hole and use impact weight,
BMW No. 00 8 582, to remove the shaft sealing
ring.
•
Install the new sealing ring with the sealing lips
facing inwards, using guide pin,
BMW No. 23 4 722, and impact driver,
BMW No. 23 4 721.

Renewing shaft sealing ring for selector drum

•
Lever the shaft sealing ring out with a screw-
driver.
•
Install the new sealing ring with the sealing lips
facing inwards, using impact driver,
BMW No. 23 4 750.

Renewing sealing ring for selector shaft

•
Lever the shaft sealing ring out with a screw-
driver.
•
Install the new sealing ring with the sealing lips
facing inwards, using slip-over sleeve,
BMW No. 23 4 612, and impact driver,
BMW No. 23 4 740.
23.8
23 4 612
23 4 722
23 4 721
00 8 582
00 8 581
00 8 583
23 4 750
23 4 740
C230160