Rotenso CONTROL SETU User Manual page 16

Remote control - Setu
EN
7.9. Automatic iClean (Active Clean) cleaning (selected models)
Press the Clean
Clean
7.10. Turbo function (selected models)
Press the Turbo button
Turbo
7.11. FRESH air ionisation function (selected models)
Press the Fresh button
Fresh
16
User manual
The Active Clean function is an advanced self-cleaning function for the
exchanger of the air conditioner's indoor unit. It consists in maximum cooling
followed by maximum heating of the exchanger. The function is designed
to eliminate unwanted bacteria and fungi. To activate the function, press the
„CLEAN" button or select (cleaning icon, such asterisks) via the „SET" button
and the display of the indoor unit will show „CL".
Note: Function only available in cooling (COOL) and dehumidi cation (DRY) mode.
When the Turbo function is selected in COOL mode, the unit will blow cool
air at maximum force to quickly cool the room.
When the Turbo function is selected in heating mode (HEAT) (only on units
with a built-in heat pump), the air conditioner will blow warm air with
maximum force to heat the room quickly.
Air ionisation function (Fresh) (
When this function is initiated, the ioniser will switch on and help purify the
air in the room.
)