Rotenso CONTROL SETU User Manual page 14

Remote control - Setu
EN
Selected models have the option of activating the FP8 function via the mobile app (press the pictogram of
the sun described as FP).
Pressing the ON/OFF, Sleep, Mode, Fan or up and down buttons while in the AP function will cancel it.
Note: Pressing the ON/OFF, Sleep, Mode, Fan, up and down buttons or using the function in the mobile app while FP
mode is running will cancel it.
7.7. Lock function (LOCK)
5s
Clean
+
7.8. Function button SET
SET
• Press the SET button to enter the function settings, then press the SET button again or the
to select the desired function. The selected indicator will start ashing on the remote control screen, then
press the OK button to con rm.
• To cancel the selected function, follow the same steps as above
• Press the SET button to scroll through the operating functions as follows:
Breeze Away function (
Note[*]: If the remote control is equipped with a Fresh or Sleep button, the SET button cannot be used to select
the listed functions.
Breeze Away function (
This function prevents direct air blowing on the body and makes you feel a gentle chill.
Note: Function only available in cooling (COOL), ventilation (FAN) and dehumidi cation (DRY) modes.
Sleep function (Sleep)(
This function is used to reduce energy consumption during sleep (and it is not necessary to leave the same
temperature settings) in order to set a comfortable sleeping environment. This function can only be
activated via the remote control.
Note: The sleep function is not available in ventilation (FAN) and dehumidi cation (DRY) mode.
14
User manual
5s
Press the Clean and Turbo buttons simultaneously for more
than 5 seconds to activate the lock function. No buttons will
Turbo
respond, except for pressing these two buttons again for
two seconds to deactivate the lock.
SET
or
Sleep function (
)
) (selected models):
):
) Follow Me ( )
or
AP mode (
)
OK
button