Advertisement
Quick Links
Installation Instruction
V1.0
PISF1
Thank you for choosing our product! We strive to provide the best quality
and services for our customers. Would you kindly share your experience
on Amazon if you are satisfied? Should you have any issues, please don't
hesitate to contact us.
Telephone：800-556-9829 Mon-Fri 10am - 6pm (PST) (USA) (CAN)
Email：supportus@pipishell.net (US/CA/DE/UK/FR/IT/ES/JP/AU)
Advertisement
Related Manuals for Pipishell PISF1
Summary of Contents for Pipishell PISF1
- Page 1 Installation Instruction V1.0 PISF1 Thank you for choosing our product! We strive to provide the best quality and services for our customers. Would you kindly share your experience on Amazon if you are satisfied? Should you have any issues, please don't hesitate to contact us.
-
Page 2: Supplied Parts
Do not install or assemble if the product or hardware is damaged or missing. Not all parts and hardware included must be used. lf you require replacement parts, contact customer service at supportus@pipishell.net This product may contain moving parts. Use with caution. - Page 3 Supplied Hardwar Hardware for Attaching Wall Plate to Wall Lag Bolts Carriage Washers Nuts Bolts Ø6mm M6X60 M6 x 12 CAUTION! Wall Anchor These anchors are for concrete or brick walls ONLY. DO NOT use them in drywall or wood studs. Hardware for Attaching TV Bracket to TV Spacers Spacers...
- Page 4 Step 1 Measure VESA Measure the distance between the holes located at the back of your TV (these measures may form the shape of a square, or a rectangle) and check that these taken measures are within the VESA (*) range for this wall mount. (*) VESA: International standard established by the TV manufacturers used to determine if LCD/LED TVs are compatible with wall mounts.
- Page 5 Step 2-2 Select TV hardware Bolt and spacer combination: spacers sometimes are needed to combine with bolts for several situations as below: TV back TV back TV back TV back Add distance to wall Irregular back Insert Cables Step 2-3 Attach the TV Bracket for VESA hole pattern: 75 mm X 75 mm 100mm X 100mm...
- Page 6 Step 3A Wall Plate Install (Concrete Wall) CAUTION : Anchor These anchors are for concrete or brick walls ONLY. DO NOT use them in drywall or wood studs. 3A-1 3A-2 Drill 2 pilot holes using a 25/64 in.(10 mm) diameter drill bit. Make sure the depth is not less than 2.75in.
- Page 7 Step 3B Wall Plate Install (Wood stud) CAUTION : These anchors are for concrete or brick walls ONLY. DO NOT use them in drywall or wood studs. 3B-1 3B-2 Position the wall plate at your desired height Use a stud finder(not included)to locate and lineup the holes with your stud center wood studs.
- Page 8 Step 4 Hang the TV onto the wall plate Take this apart. Mounting your TV to the brackets and lock it. If needed, the TV can be tilted +5/-15 degrees and rotate 360 degrees from left to right. +5°/-15° 360°...
Need help?
Do you have a question about the PISF1 and is the answer not in the manual?
Questions and answers