Philips AVENT SCD971 Manual page 18

18
English
3 Remove the screw section by unlocking it with your thumb and sliding it
down and off. You are now left with the piece that will be used as the wall
mount.
4 Find the wall mount template and use a ruler to measure 1.1 meters up from
the floor and mark where the two screws should go. Drill small holes into the
wall and push in the anchors provided.
Tip: The wall mount template (see the ''Wall mount template'' chapter) can
be found at the end of this user manual.
5 Take the wall mount bracket and align the holes with the anchors. Attach the
wall mount bracket to the wall securely by using the screws provided.
6 Take the two poles and push them together to make one longer pole.
Note: You will hear a small click when they are secured.
7 Then, with the power cord first, insert the pole through the opening of the
wall mount bracket.