1. Manuals
  2. Brands
  3. Amphenol Manuals
  4. Enclosure
  5. Charles SHRD52-991 XGN1 Series
  6. General description and installation

Amphenol Charles SHRD52-991 XGN1 Series General Description And Installation

Charles universal broadband enclosure
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
1.
GENERAL INTRODUCTION ...................................................... 1
1.1. Document Purpose ................................................................... 1
1.2. Product Purpose ....................................................................... 1
1.3. Product Mounting and Location ............................................... 1
2.
PRODUCT DESCRIPTION ........................................................... 2
3.
INSTALLATION ............................................................................ 4
3.1. Inspecting the Product .............................................................. 4
3.2. Following and Using Safety Precautions.................................. 4
3.3. Obtaining Tools and Equipment ............................................... 4
3.4. Preparing the Installation Site .................................................. 4
3.5. Lifting the SHRD52 .................................................................. 5
3.6. Mounting the SHRD52 ............................................................. 5
3.7. SHRD52 Wiring and Equipment ............................................... 7
3.8. Customer Equipment Mounting ................................................ 8
3.9. Conduit Seals.......................................................................... 19
4.
PERIODIC MAINTENANCE ...................................................... 20
5.
6.
WARRANTY & CUSTOMER SERVICE ................................... 20
7.
SPECIFICATIONS ....................................................................... 20

1. GENERAL INTRODUCTION

1.1. Document Purpose

This document provides general information for the SHRD52-991xXGN1 universal backplane radio shroud. Figure 1 shows a closed front
view of the enclosure.
Hereafter, the Charles Universal Broadband Enclosure SHRD52-991xXGN1 will be referred to as the "SHRD52."

1.2. Product Purpose

This SHRD52 provides outdoor mounting for any preferred radio configuration. The universal backplane can accommodate brackets
designed to hold any specified radio equipment. Bracket kits are ordered separately. All radio equipment is customer supplied.

1.3. Product Mounting and Location

This enclosure is suitable for outside plant-type (OSP) locations and those that may require NEC compliance. The outdoor, weather-
resistant SHRD52 is to be mounted on a pole (using a pole-mount bracket kit). The installer connects the power, fiber and copper
connections. Detailed mounting and installation information is covered in Section 3.
©Copyright 2024 Charles Industries LLC. All rights reserved.
Availability of features and technical specifications herein are subject to change without notice.
Charles is a registered trademark of Charles Industries.
Charles Universal Broadband Enclosure
SHRD52-991xXGN1
General Description and Installation
Figure 1
-NOTE-
LT-SHRD52-991
14
Printing, October 7, 2024
th
Front View of the SHRD52
Page 1 of 23

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Charles SHRD52-991 XGN1 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Amphenol Charles SHRD52-991 XGN1 Series

Summary of Contents for Amphenol Charles SHRD52-991 XGN1 Series

  • Page 1: Table Of Contents

    LT-SHRD52-991 Printing, October 7, 2024 Charles Universal Broadband Enclosure SHRD52-991xXGN1 General Description and Installation GENERAL INTRODUCTION ............1 1.1. Document Purpose ..............1 1.2. Product Purpose ............... 1 1.3. Product Mounting and Location ..........1 PRODUCT DESCRIPTION ............2 INSTALLATION ................4 3.1.

  • Page 2: Product Description

    LT-SHRD52-991 2. PRODUCT DESCRIPTION The SHRD52 is a vented radio enclosure with a universal backplane that accommodates Charles radio mounting bracket kits (purchased separately). The customer installs the brackets and the customer supplied radio equipment onto the backplane. Figure 2 shows the SHRD52 dimensions. Figure 3 shows the main components of the SHRD52. 22.00 15.01 47.00...
  • Page 3 LT-SHRD52-991 UNIVERSAL BACKPLANE LIFTING EYE (3) QTR TURN (2) DRAW LATCHES 216 STYLE PADLOCKABLE LATCHES (2) 2X8 POSITION GROUND BARS (2) WIND LATCHES Figure 3 SHRD52 Components Printing Page 3 of 23...

  • Page 4: Installation

    LT-SHRD52-991 3. INSTALLATION 3.1. Inspecting the Product The SHRD52 is shipped lying down on a skid. Remove the bolts, unpack the unit, and dispose of the packaging material. -INSPECTION NOTE- Visually inspect the unit for damages prior to installation. If the equipment was damaged in transit, immediately report the extent of the damage to the transportation company.

  • Page 5: Lifting The Shrd52

    LT-SHRD52-991 3.5. Lifting the SHRD52 See Table 1 for SHRD52 weight. See Table 2 for mounting kit weights. Charles recommends the following procedure for lifting the SHRD52. 3.5.1. Required Equipment One derrick (crane) capable of lifting the SHRD52 • • Two lifting slings or chains with each having a 2,500 lbs.
  • Page 6 LT-SHRD52-991 Figure 5 Mounting with Kits 97-002572x-A or 97-002190-A Figure 6 Mounting with Kits 97-SH52CHN4 Series or 97-SH52CHN6 Series HEX NUT INSIDE SHRD52 SEE DETAIL FITTING FROM AC LOAD CENTER (THRU CENTER KNOCKOUT) Figure 7 AC Load Center Fitting (97-SH52CHN4DWP/SCE and 97-SH52CHN6DWP/SCE Only) Page 6 of 23 Printing...

  • Page 7: Shrd52 Wiring And Equipment

    LT-SHRD52-991 3.7. SHRD52 Wiring and Equipment After the SHRD52 is properly mounted in the desired location, apply No-Ox where bus bar and other 2-hole lug connections will be made. Install ground and power connections. Always ground the equipment first, before making any other connections. WARNING Perform all bonding and grounding connections prior to any electrical and communications connections.

  • Page 8: Customer Equipment Mounting

    LT-SHRD52-991 3.7.1. Ground Connection Use the two 2x8 position ground bars provided inside the SHRD52 for all grounding of internal equipment and for connecting a site ground wire. 3.7.2. Fiber and Copper Entry The CUBE has three Ø1.75/2.5 knockouts on the top and three more on the bottom. These knockouts accommodate Ø1.25/2.00 conduit fittings.
  • Page 9 LT-SHRD52-991 3.8.1. Configuration 1 This configuration includes the following bracket kits. Coordinates for the bracket hooks are shown in the table and figure below. (1) Nokia FWHR radio (front facing) (1) 97-NFWHRSHRD521 E30, F30, E40, and F40 A B C D E F G H I J K L M N O P Q R Figure 13 Configuration 1 with Customer Equipment Figure 12...
  • Page 10 LT-SHRD52-991 3.8.2. Configuration 2 This configuration includes the following bracket kits. Coordinates for the bracket hooks are shown in the table and figure below. (1) Nokia FWHR radio (side facing) (1) 97-NFWHRSHRD522 I1, J1, I11, J11 Upper left ION bracket: A2, D2, A18, D18 Lower left ION bracket: A30, D30, A36, D36 (2) ION M radio (2) 97-CIONMSHRD521...
  • Page 11 LT-SHRD52-991 3.8.3. Configuration 3 This configuration includes the following bracket kits. Coordinates for the bracket hooks are shown in the table and figure below. (1) Nokia FWHR radio (side facing) (1) 97-NFWHRSHRD522 H7, I7,, H17, I17 Upper ION bracket: O2, R2, O18, R18 (1) ION M radio (1) 97-CIONMSHRD521 Lower ION bracket: O30, R30, O36, R36...
  • Page 12 LT-SHRD52-991 3.8.4. Configuration 4 This configuration includes the following bracket kits. Coordinates for the bracket hooks are shown in the table and figure below. (1) Nokia FWHR radio (side facing) (1) 97-NFWHRSHRD522 L3, M3, L13, M13 (1) Ericsson 4455 radio (1) 97-E4455SHRD521 B10, E10, B23, E23 M18, N18, M25, N25...
  • Page 13 LT-SHRD52-991 3.8.5. Configuration 5 This configuration includes the following bracket kits. Coordinates for the bracket hooks are shown in the table and figure below. (1) Nokia FWHR radio (side facing) (1) 97-NFWHRSHRD522 O1, P1, O11, P11 A5, B5, A26, B26 (2) BTI 40W radio (2) 97-BTI40SHRD521 F5, G5, F26, G26...
  • Page 14 LT-SHRD52-991 3.8.6. Configuration 6 This configuration includes the following bracket kits. Coordinates for the bracket hooks are shown in the table and figure below. (1) Nokia FWHR radio (side facing) (1) 97-NFWHRSHRD522 I1, J1, I11, J11 A9, C9, A19, C19 (2) Ericsson 4415 radios (2) 97-E4415SHRD521 P9, R9, P19, R19...
  • Page 15 LT-SHRD52-991 3.8.7. Configuration 7 This configuration includes the following bracket kits. Coordinates for the bracket hooks are shown in the table and figure below. (1) Samsung 160W or 320W dual band (1) 97-SAMDBSHRD521 E1, I1, E18, I18 radio A B C D E F G H I J K L M N O P Q R Figure 25 Configuration 7 with Customer Equipment Figure 24...
  • Page 16 LT-SHRD52-991 3.8.8. Configuration 8 This configuration includes the following bracket kits. Coordinates for the bracket hooks are shown in the table and figure below. (1) Nokia AHxxx dual band radio (1) 97-NAHDBSHRD521 B3, E3, B21, E21 (1) Delta 2kW power supply (1) 97-DL2KWSHRD521 M27, N27, M41, N41 A B C D E F G H I J K L M N O P Q R...
  • Page 17 LT-SHRD52-991 3.8.9. Configuration 9 This configuration includes the following brackets. Coordinates for the bracket hooks are shown in the table and figure below. These brackets are installed at the factory. (1) Nokia B66 radio A8, D8, A26, D26 (1) Nokia 1830-VLM radio I3, J3, I17, J17 (1) Nokia B25 radio O3, R3, O21, R21...
  • Page 18 LT-SHRD52-991 3.8.10. Configuration 10 This configuration includes the following brackets. Coordinates for the bracket hooks are shown in the table and figure below. (1) Ericsson 8843, 4449, 4478, 4426, or (1) 97-E8844SHRD521 L4, O4, L19, O19 4415 radio (1) Ericsson 4455 radio (1) 97-E4455SHRD521 B16, E16, B29, E29 K28, K36...
  • Page 19 LT-SHRD52-991 3.8.11. Configuration 11 This configuration includes the following brackets. Coordinates for the bracket hooks are shown in the table and figure below. (1) Ericsson 8863 radio (1) 97-E8863SHRD521 K9, N9, K29, N19 (1) Ericsson 4455 radio (1) 97-E4455SHRD522 I22, Q22, I32, Q32 (1) Ericsson 6304 power supply (1) 97-E4415SHRD521 B6, C6, B16, C16...

  • Page 20: Conduit Seals

    LT-SHRD52-991 3.9. Conduit Seals All conduit openings on the SHRD52 must be completely sealed with a duct seal compound to prevent moisture from entering the SHRD52. Use a moldable, flame-retardant putty style duct seal material. Do not use an expanding foam seal. Mold the putty so that the open space around the wire or conduit BEFORE is completely sealed, as shown in Figure 32.
  • Page 21 LT-SHRD52-991 Mounting Kit Description Approx. Weight 97-002190-A Pole Mounting Kit with 3” Offset 41 lbs. 97-002572-A Pole Mounting Kit with 6” Offset 47 lbs. 97-SH52CHN4DWPx Wood Pole Mounting Kit with 4” Offset, AC Load Center, Meter Socket 90 lbs. 97-SH52CHN4SCEx Wood Pole Mounting Kit with 4”...
  • Page 22 LT-SHRD52-991 Configuration Approx. Configured Supported Equipment Brackets Required Number Weight (lbs) (1) Nokia FWHR radio (front facing) (1) 97-NFWHRSHRD521 (1) Nokia FWHR radio (side facing) (1) 97-NFWHRSHRD522 (2) ION M radio (2) 97-CIONMSHRD521 (2) Diplexers (1) 97-DPLXSHRD521 (1) Nokia FWHR radio (side facing) (1) 97-NFWHRSHRD522 (1) ION M radio (1) 97-CIONMSHRD521...
  • Page 23 LT-SHRD52-991 Supported Equipment Kit Part Number Ericsson 6585 DWDM 97-EDWDMSHRD521 Nokia Airscale Micro radio 97-NKASMSHRD521 Samsung CBRS radio 97-SCBRSSHRD521 Nokia FWHR radio 97-NFWHRSHRD521 ION M radio 97-CIONMSHRD521 Diplexers 97-DPLXSHRD521 Ericsson 4455 radio 97-E4455SHRD521 Ericsson 220x radio 97-E220xSHRD521 BTI 40W radio 97-BTI40SHRD521 Ericsson 4415 radio 97-E4415SHRD521...

Table of Contents