SAFETY INFORMATION Federal Communications Commission (FCC) Notice (U.S. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
SAFETY INFORMATION Turkey RoHS Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur. Ukraine RoHS Обладнання відповідає вимогам Технічного регламенту щодо обмеження використання деяких небезпечних речовин в електричному та електронному обладнанні, затвердженого постановою Кабінету Міністрів України від 3 грудня 2008 № 1057.
PRECAUTIONS PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Symbols used in this manual This icon indicates the existence of a potential hazard that could result in personal injury or damage to the product. This icon indicates important operating and servicing information. Notice •...
Users who have already mounted the display on the ceiling or any other horizontal surface overhead are strongly advised to contact AG Neovo for consultations and solutions to help ensure a most pleasurable and fulfilling display experience.
PRECAUTIONS Cleaning and Maintenance Do not attempt to service the LCD display yourself, refer to qualified service personnel. Opening or removing the covers may expose you to dangerous voltage or other risks. Notice for the LCD Display In order to maintain the stable luminous performance, it is recommended to use low brightness setting. Due to the lifespan of the lamp, it is normal that the brightness quality of the LCD display may decrease with time.
CHAPTER 1: PRODUCT DESCRIPTION 1.1 Package Contents When unpacking, check if the following items are included in the package. If any of them is missing or damaged, contact your dealer. LCD Display Quick Start Guide Power Cord Type-C Cable HDMI Cable Adapter Stand Warranty Card...
PRODUCT DESCRIPTION 1.2 Installation 1.2.1 Installing the Stand 1. Take out the stand and base, and lock the stand with the hand screw that comes with the base. 2. Insert the assembled base into the corresponding bayonet of the rear shell, and gently align the tail end perpendicular to the surface of the rear shell, so that the lock of the bracket can be buckled on the quick release button of the rear shell.
Note: Take measures to prevent the LCD display from falling down and lessen possible injury and damage to the display in case of earthquakes or other disasters. • Use only the 100 x 100 mm wall mount kit recommended by AG Neovo. All AG Neovo wall mount kits comply with VESA standard.
PRODUCT DESCRIPTION 1.3 Overview 1.3.1 Front View Display screen Power status indicator: Indicates the operating status of the display: • Lights Blue when the display is turned on. • Lights amber when the display is in standby mode. • Lights off when the main power of the display is turned off.
PRODUCT DESCRIPTION 1.3 Overview 1.3.2 Control Buttons Move the Arrow Key ▲ / ▼ / t / u to activate the Quick Menu. Picture Mode Contrast/Brightness Input Select Main Menu Exit Note: ♦ Follow the key guide that appears on the screen to select the option or make adjustments. Menu Description Picture Mode...
PRODUCT DESCRIPTION 1.3.3 Rear View DC IN Connect the included adapter. HDMI IN Connect HDMI signals input. DP IN Connect DisplayPort signals input. Type-C IN Connect Type-C signals input. AUDIO OUT Connect audio signals output (3.5 mm Stereo Audio Jack). Kensington lock socket Use to physically lock the system to prevent theft.
CHAPTER 2: MAKING CONNECTIONS 2.1 Making Connections...
Page 15
CHAPTER 2: MAKING CONNECTIONS • When charging connected device via USB Type-C Connector, check if the device is equipped with a USB Type-C Connector that supports charging function via USB PD (Power Delivery). • The connected device can be charged via USB Type-C connector even when the monitor is in standby mode.
If the Power button is locked, the below message will appear on the screen: Power Lock/Unlock Power Button Locked Press and hold the key for 5 seconds to display/hide the AG Neovo boot up screen when the display is turned on/off. Boot Up Screen On/Off Boot Up Screen On/Off ▲...
CHAPTER 3: ON SCREEN DISPLAY MENU Advanced Setup Image Adjust Menu 3.1 Configuring the Settings Arrow Key Operations Advanced Setup Image Adjust Menu Button Button Information Down Enter Return Left Exit Rght 1. Move the Arrow Key ▲ / ▼ / t / u to display the Quick Menu. Then press the Key to display the On- Screen Display (OSD) Menu.
Page 18
CHAPTER 3: ON SCREEN DISPLAY MENU 3. Move the Arrow Key ▲ or ▼ to select the desired menu option. Then press the Key to enter the sub- menu. Input Audio Picture Color Advanced Setup Source Adjust Mode Adjust Image Adjust Menu Contrast/Brightness sRGB...
CHAPTER 3: ON SCREEN DISPLAY MENU 3.2 OSD Menu Tree Main Menu Submenu Third menu Description HDMI1 HDMI2 Signal source switching, HDMI1/HDMI2/DisplayPort/ Input Select Type-C DisplayPort Type C Volume (-/+) 0-100/1 Volume control Audio Adjust Mute Mute switch selection Standard Movie Scenario mode selection, different scenario modes have Picture Mode...
Page 20
ON SCREEN DISPLAY MENU Sharpness (-/+) 0-100/25 Clarity adjustment to make the font clearer The software has low blue light, mainly for adjusting the Blue Light Filter (-/+) 0-100/1 color of the B-gun. Aspect Ratio Set the aspect ratio of the monitor Full Screen The over scan setting is mainly aimed at HDMI signals in DVD format, with noise function at the boundaries.
CHAPTER 4: APPENDIX 4.1 Warning Messages When any of these warning messages appear, check the following items. Warning Message Cause Solution The LCD display cannot detect the √ Check if the input source is input source signal. turned ON. No signal √...
APPENDIX 4.2 Troubleshooting Problems Possible Cause and Solution The power indicator • Check if the power is on. light is not on • Check if the power cord is connected. Impossible plug-and-play • Check if the function of plug-and-play of the device is compatible with •...
Need help?
Do you have a question about the EM2451 and is the answer not in the manual?
Questions and answers