Precautions Notice • The product specifications and other information provided in this User Manual are for reference only. Provided information was correct at time of print. All information is subject to change without notice. Updated content can be downloaded from our website at http://www.agneovo.com.
Transportation When you transport this monitor for repair or shipment, use the original carton and packing materials. Retracting the base stand If you want to bend up the base to 90 degrees for transportation, please push the 2 metal pillars on the bottom of base and fold to 90 degrees as shown in the illustration below.
Insert a coin or flat screwdriver into the rear cover slot and pull out the rear cover. Second, unlock base assembly Unlock two screws Remove base assembly Third, mount arm or wall mount kit on the rear side. AG Neovo wall-mountable products (wall mount kit, WMK series) are recommended.
Getting Started Unpacking Your LCD Display After you have unpacked your LCD display, make sure that the following items are included in the package. • LCD display • Adaptor (Output Voltage should be 12Vdc and Ampere should be min.4A) • Power cord •...
Control Buttons Front View Power Switch Turn the monitor on or off. LED Indicator Indicate the monitor’s operational mode: green for regular mode, and amber for power saving mode. Right Button 1. Activate the On-Screen Display menu. 2. While the On-Screen Display menu appears, press to move the selected item clockwise or onward.
Auto Button / Video Mode 1. Press to select the preferred video mode: User, Text, Movie, Game or Graphic. The option will toggle on the top right hand corner of the display. 2. Press for 3 seconds to adjust the picture position and performance automatically for optimal settings.
Step 3: With the monitor turned off, connect the monitor end power plug of adapter to the power jack of the monitor. Then connect the power cord to the adapter and the power plug to the power source. Step 4: Turn on your computer or video equipment. Press power switch to turn on monitor.
Adjusting Your LCD Display In the OSD menu, you will find all kinds of features to help you adjust your LCD panel to the optimal performance. User Mode: To allow preferable viewing images for different tasks, users are able to adjust each setting manually in User mode.
OSD Menus VGA-Input Brightness Adjustment Contrast Adjustment Horizontal Position Adjustment Vertical Position Adjustment Sharpness Adjustment OSD Transparency Adjustment Important! Sharpness adjustment is not available when: 1. the resolution is set as 1440 x 900 (E-W19) or 1680 x 1050 (E-W22); or 2.
Page 13
Phase Adjustment Clock Adjustment Color Temperature Selection Horizontal OSD Position Adjustment Vertical OSD Position Adjustment Tools Adjustment Video Mode selection Language Selection...
Page 14
Auto and Input Select Selection Exit Selection DVI-Input Important! When DVI-Input is selected, the following adjustments are not available: horizontal position adjustment, vertical position adjustment, sharpness, phase adjustment and clock adjustment. Brightness Adjustment Contrast Adjustment OSD Transparency Adjustment Color Temperature Selection Horizontal OSD Position Adjustment Vertical OSD Position Adjustment...
Page 15
Tools Selection Video Mode selection Language Selection Auto and Input Select Selection Exit Selection...
Warning Messages and Troubleshooting Warning Messages When a warning message appears on the screen, check the following items to locate the problem affecting your LCD display. NO SIGNAL INPUT When no input signal is detected from any input ports. • Check if your PC or video source is ON.
Troubleshooting Guide Symptoms Check • • No display Check if the power of your LCD display is ON. • • Power LED is off Check if the adaptor is correctly connected to your LCD display. • Check if the power cord is correctly connected to the adaptor. •...
Regulations This FCC Class-B compliant digital device complies with the Interference-Causing Equipment Regulations of Canada. FCC Declaimers This device complies with Section 15 of the FCC listing. The operation procedures must meet the following conditions: (1) this device must not cause any damaging interference; and (2) this device must accept any received interference, including any unpredictable interference that may possibly occur.
We AG Neovo at are very conscious of the environmental forces that impose on our business and strive to identify and provide the best working products to reduce the environmental impact of our products.
Need help?
Do you have a question about the E-Series and is the answer not in the manual?
Questions and answers