ComAp InteliGen4 200 Operator's Manual page 12

Note: Use the Up and Down buttons to move between measurement pages.
Note: Available only with ECU supported by TIER4F
Note: Use the Up and Down buttons to move between measurement pages.
Note: Use the Up and Down buttons to move between measurement pages.
Note: From all of these pages it is possible to switch seamlessly to the setpoint group page by pressing
Page button.
Note: There can be some additional screens and also some screens can be hidden. Screen's visibility
depends on actual configuration (usage of extension or communication modules, ECU etc.).
12
InteliGen4 200 Operator Guide