Page 1
ONU1910-4G-W/ONU1910-4GV-W GPON/EPON ONUS GPON/EPON ONUS ONU GPON/EPON GPON/EPON ONU Quick Start Guide V1.0 Quick Start Anleitung Guide de Démarrage Rapide クイックスタートガイド...
Page 2
ONUs and describes how to deploy them in your network. LOS/PON Internet LAN 1 LAN 2 LAN 3 LAN 4 WIFI ONU1910-4G-W/ONU1910-4GV-W Accessory Power Cord x1 NOTE: The accessory may vary from illustration, please prevail in kind.
Hardware Overview Ports ONU1910-4G-W LAN 1 LAN 2 LAN 3 LAN 4 ON/OFF LAN 1~4 USB PWR ONU1910-4GV-W LAN 1 LAN 2 LAN 3 LAN 4 VOIP ON/OFF LAN 1~4 VOIP ONU1910-4G-W/ONU1910-4GV-W...
Page 4
4GV-W Only) A USB management port for software and con guration backup and o ine software upgrade A DC power port Realize the access of the GPON ONU LEDs ONU1910-4G-W LOS/PON Internet LAN 1 LAN 2 LAN 3 LAN 4...
Page 5
LEDs State Description Solid On The system is powered on normally. The system is not powered on. The ONU activation has not started. The ONU received optical power is lower than Blinking Red the optical receiver sensitivity. LOS/PON Blinking Green The ONU is being activated.
Page 6
The system is not powered on or the USB disk is not connected. Registration is successful but no data Solid Green transmission. Blinking Green The USB port is transferring data. Buttons ONU1910-4G-W LAN 1 LAN 2 LAN 3 LAN 4 ON/OFF RST ON/OFF ONU1910-4GV-W...
Installation Requirements To avoid lightning strikes, unplug all power cords and cables during thunderstorms. Make sure that the installation site is well-ventilated, the heat of electrical devices is well-discharged, and su cient air circulation is provided for device cooling. Use the rated power adapter equipped with the device. Mounting the ONU Desk Mounting Place the ONU on a horizontal and at desk.
Connecting the USB Port Insert the Universal Serial Bus (USB) ash disk into the USB port for software and con guration backup and o ine software upgrade. Connecting the LAN Ports Connecting the LAN port to a computer or a network television with a network cable.
Page 9
Connecting the PON Port GPON 1. Then connect the splitter to the PON transceiver of the OLT with a ber cable. 2. Connect the ONU to an optical splitter with an SC optical ber cable. Connecting the VOIP Port (ONU1910-4GV-W Only) Connecting the VOIP port to a telephone.
Con guring the ONU Computer Setting Step 1: Click Start-Control Panel-Network and Internet-Network and Sharing Center-Local Area Connection, select Local Area Connection, and click Properties. Step 2: Double-click Internet Protocol 4 (TCP/IPV4). Select Obtain an IP address automatically and Obtain DNS server address automatically, and then click OK.
Wizard Setting Step 1: Open the web browser. Enter 192.168.123.1 and click Enter. Enter the default username and password, user/123456 for the user interface. Enter admin/super&123 for the administrator interface. Step 2: After login, click Status on the top navigation bar. Then click Device on the left navigation bar to get basic information about the device.
Step 2: Click Wireless Network Connection. Step 3: Click the Refresh button, select the wireless network name, and double-click it. Step 4: Enter the password and click OK. Troubleshooting WiFi Has a Signal on the PC but It Cannot Connect to the Internet 1.
Product Warranty FS ensures our customers that for any damage or faulty items due to our workmanship, we will o er a free return within 30 days from the day you receive your goods. This excludes any custom-made items or tailored solutions.
Need help?
Do you have a question about the ONU1910-4G-W and is the answer not in the manual?
Questions and answers