FS S3700-24T4F Configuration Manual
Reset and recovery system
Hide thumbs
Also See for S3700-24T4F:
- Cli reference manual (81 pages) ,
- Quick start manual (46 pages) ,
- Reference manual (45 pages)
Subscribe to Our Youtube Channel
Related Manuals for FS S3700-24T4F
Summary of Contents for FS S3700-24T4F
- Page 1 S3700-24T4F RESET AND RECOVERY SYSTEM CONFIGURATION GUIDE Reset and Recovery System Configuration Guide Model: S3700-24T4F www.fs.com...
- Page 2 S3700-24T4F RESET AND RECOVERY SYSTEM CONFIGURATION GUIDE Contents 1. Configuration Considerations................................1 2. Network Topology....................................1 3. Operation Steps...................................... 1 3.1 Connection Equipment..................................1 3.2 Download Configuration Software..............................1 3.3 Switch On and Use Login Software..............................1 3.4 Restoration System...................................2 3.5 Switch to Factory Reset..................................3...
- Page 3 S3700-24T4F RESET AND RECOVERY SYSTEM CONFIGURATION GUIDE 1. Configuration Considerations Table 1 products and versions for example. Series Product Support version S3700 S3700-24T4F 2. Network Topology 3. Operation Steps 3.1 Connection Equipment #According to the way of networking topo to connect PC and switch to network cable and Console. One end of the RJ-45 network cable is connected to the PC NIC, and the other end is connected to the SW's network port.
- Page 4 S3700-24T4F RESET AND RECOVERY SYSTEM CONFIGURATION GUIDE NOTE: COM Number can be viewed through device manager. (right click on my computer.>manage>device manager>port (COM and LPT）If it displays an unrecognized USB device, please download and install the corresponding driver. 3.4 Restoration System *Please use Ctrl + P to enter the monitor # interface when restarting the switch，then configure the switch IP address:...
- Page 5 S3700-24T4F RESET AND RECOVERY SYSTEM CONFIGURATION GUIDE *Then prepare tftp *Then start upgrading the system: run copy tftp flash. Monitor#copy tftp flash //From ftp to flash Source file name[ ]? FS-S1400-24T4F-2.2.0C.bin //Firmware file name Remote-server ip address[ ]? 192.168.1.2 //TFTP Server IP address Destination file name[FS-S1400-24T4F-2.2.0C.bin]? //Switch.bin...
- Page 6 S3910 SERIES SWITCHES DATASHEET www.fs.com...
Need help?
Do you have a question about the S3700-24T4F and is the answer not in the manual?
Questions and answers