Envirovent ATMOS Installation Manual page 19

Pairing an additional remote-control:
1. Turn the unit off at the isolation point.
2. Restore power; for 20 seconds from restart the unit will be in
pairing mode.
3. Press the remote-control button once within the 20 seconds and
the control will pair to the unit.
4. Successful pairing is indicated by a green light on the remote.
Remote-control batteries
When the battery needs to be replaced, unscrew the switch front
cover. The battery is located on the back of the cover. Battery type
3V Lithium CR2032. The switch will remain paired with the unit after
battery replacement. Ensure the new battery is inserted with correct
polarity, and the removed battery is safely disposed of.
DO NOT
AFTER INSTALLATION THE END USER SHOULD
KEEP THIS GUIDE FOR FUTURE REFERENCE THROW AWAY
18