Download Print this page

Operation Instruction - Audiovox LCM7020PKG Installation And Operation Manual

Two 7" monitors with two audio/video input capability mounted in vehicle specific headrests

Advertisement

OPERATION INSTRUCTION

Button Functions
There are six buttons on the front of the monitor: POWER, SOURCE, WIDE, MENU (Master Only)
or PICTURE (Slave Only), VOLUME - and VOLUME +.
1) POWER
2) SOURCE
3) WIDE
4) MENU
5) PICTURE
6) VOLUME -
VOLUME+
Also, with the menu displayed on the screen you may then use the VOLUME- and VOLUME+
buttons to select from: Picture, Source, Audio (Master only) and Display off. When the appro-
priate item is highlighted you may then press the MENU button to access that function, then
use the VOLUME- or VOLUME+ to adjust or switch the selected item.
OSD
1) Press the MENU button (on Master monitor) or MENU/ENTER button (on the master remote
control) , the following OSD is displayed:
a) For using the Master monitor:
Use VOLUME- or VOLUME+ buttons to highlight the AUDIO item, then press MENU/ENTER
button, OSD as below :
Use VOLUME- or VOLUME+ buttons to select the audio for the FM Modulator. (Blue lettering
indicates the audio source has been selected at the moment).
b) For using the Slave Monitor:
The Slave monitor cannot select the audio source for the FM Modulator, so the OSD "AUDIO"
does not appear in the slave menu.
c) Select DISPLAY , then press the MENU button, this item will change to "DISPLAY ON", that
means the source number selected will be displayed on the monitor until "DISPLAY OFF" is
selected.
: Pressing this button will turn the unit on/ off.
: Pressing this button will select between AV1 and AV2.
: Allows the user to change screen format (Aspect Ratio , 4:3 or 16:9).
: This button is only on the Master monitor. Pressing this button, will display the
menu OSD. After opening the menu, it is used as the Enter function.
: This button is only on the Slave monitor. Pressing this button will display the
picture adjustment menu: BRIGHTNESS, CONTRAST, COLOR, TINT.
: Decrease the volume of the Wired Headphones with VOLUME- button.
: Increase the volume of the Wired Headphones with VOLUME+ button.
MENU
PICTURE
SOURCE
AUDIO
DISPLAY OFF
AUDIO
AUDIO 1
AUDIO 2
MENU
PICTURE
SOURCE
DISPLAY OFF
-8-

Advertisement

loading