Remote Control Operation - Audiovox AVXMTG13UA Installation Manual

REMOTE CONTROL OPERATION

Battery Installation
Before attempting to operate the remote control, remove the protective pull tab at the bottom of the remote.
Battery Replacement
1. Depress the tab (1) and slide the battery holder (2) out in the direction of the arrow.
2. Install one CR2025 battery. Make sure that the proper polarity (+ or -) is observed.
3. Slide the battery holder into the remote control until it locks.
Tab (1)
(1)
Protective Pull Tab
Clear Plastic
Battery
Holder (2)
(2)
Back View
7