Solid State Logic SSL 18 User Manual page 34

To set this up, first ensure 9-10 INPUT SOURCE is set to 'Loopback'
Then, select the LOOPBACK SOURCE channel you wish to record from the drop-down menu (for example Playback 1-2 to record the
output of a media player), then in your DAW, select the input channel as Input 9-10 as shown below and record the audio as you
would with any other input channel. Be sure to mute the recording channel in your DAW to avoid creating a feedback loop!
9-10 INPUT SOURCE
This option allows you to select the Input source for DAW inputs 9-10 between Loopback, S/PDIF & Talkback.
This can be set up for creative purposes such as using the Talkback Listen Mic Compressor for creative recording uses such as Drum
Room Mics.
Contextual Help
The Contextual Help, once activated by clicking the ? button (as shown above) adds a text bar to the tooltip with a brief explanation of
the parameter's function. The below image demonstrates this with an explanation text box when hovering the mouse over the SENDS
POST on the HP B Channel.
Solo Clear
The Solo Clear button allows you to quickly clear any active solo's (or AFLs) in the SSL 18 Mixer. When any channels have been put