Advertisement
Quick Links
GRAVITY TREADMILL EXTENDED HANDRAIL KIT
ASSEMBLY INSTRUCTIONS
IMPORTANT—READ CAREFULLY
FOR IMPORTANT SAFETY INFORMATION AND DOWNLOAD OF
THE COMPLETE OWNER'S MANUAL AND ASSEMBLY GUIDE
SEE TRUEFITNESS.COM OR SCAN THE QR CODE ABOVE
IF YOU NEED IMMEDIATE ASSISTANCE PRE OR POST ASSEMBLY
CONTACT OUR SUPPORT TEAM MONDAY–FRIDAY 8:30AM–5:00PM (CST)
800.883.8783 | SERVICE@TRUEFITNESS.COM
MODEL TC39300
MAN-TC39300 REV01
SCAN FOR
OWNER'S MANUAL
SCAN FOR
ASSEMBLY VIDEO
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for True Fitness TC39300
Summary of Contents for True Fitness TC39300
- Page 1 FOR IMPORTANT SAFETY INFORMATION AND DOWNLOAD OF THE COMPLETE OWNER’S MANUAL AND ASSEMBLY GUIDE SEE TRUEFITNESS.COM OR SCAN THE QR CODE ABOVE IF YOU NEED IMMEDIATE ASSISTANCE PRE OR POST ASSEMBLY CONTACT OUR SUPPORT TEAM MONDAY–FRIDAY 8:30AM–5:00PM (CST) 800.883.8783 | SERVICE@TRUEFITNESS.COM MODEL TC39300 MAN-TC39300 REV01...
-
Page 2: Kit Contents
REAR END CAP-LEFT TC39319 RAIL COVER-RIGHT TC39320 RAIL COVER-LEFT RT0017 NUT, LOCK, NYLON, M4 X P0.7 RT0013 ROUND HEAD PHILIPS SCREW, M4-0.7 X 35MM SK-426 WRENCH, 13MM SSA5-35-160MS HEX WRENCH 5MM X 35MM X 160MM MAN-TC39300 EXTENDED HANDRAIL KIT INSTRUCTIONS... - Page 3 ADDITIONAL ITEMS NEEDED—NOT INCLUDED WITH KIT ITEM PART NUMBER DESCRIPTION TPS8123 SCREW, M8 X 90MM PS0035 SCREW M5xP0.8x15MM #2 PHILLIPS SCREWDRIVER 6MM ALLEN WRENCH WIRE CUTTERS NOTE: The additional hardware needed is included with the Gravity treadmill.
- Page 4 STEPS If this kit is part of a new installation, skip ahead to Using a 5mm allen wrench, remove and set step 2. If this kit is going on a preassembled treadmill aside the four hex screws securing the handrail continue on with this step: assembly to the pedestal assemblies.
- Page 5 STEPS CONTINUED 3. Using a #2 Phillips screwdriver, remove and set aside 6. Doing one side at a time (left side shown): the two screws securing the left and right rear roller a. Slide a long handgrip assembly onto a handrail covers to the frame.
- Page 6 STEPS CONTINUED If this kit is part of a new installation, refer back to 6. Doing one side at a time (right side shown): the assembly instructions that came with the base a. Slide a long handgrip assembly onto a handrail to assemble the console and upper assembly.
- Page 7 STEPS CONTINUED 8. Press the lower cover up against the bottom of the 9. Using a #2 Phillips screwdriver, attach the left and upper assembly. right extended handrail covers. IMPORTANT! DO NOT pinch the cables. Using a #2 Phillips screwdriver and 11 screws, secure the lower cover in place.
- Page 8 CONTACT US service@truefitness.com 800.883.8783 865 Hoff Road St. Louis, MO 63366 T R U E F I T N E S S . C O M MAN-TC39300 ASSEMBLY INSTRUCTIONS REV01 © 2025 TRUE Fitness All Rights Reserved.
Need help?
Do you have a question about the TC39300 and is the answer not in the manual?
Questions and answers