BenQ DesignVue PD Series User Manual page 44

Setting up Hotkey Puck G3 for more than one monitor
(IR Channel Setting)
Applicable for models with Hotkey Puck G3.
If your computer connects with more than one monitor, you can switch to different monitor
quickly with your Hotkey Puck G3.
When each monitor goes with one Hotkey Puck G3
1. Set one monitor to a channel from Custom Key > IR Channel Setting. The default setting
is Channel 1. To avoid interference, set monitors to different channels.
2. Set the channel switch on Hotkey Puck G3 to map with the monitor it goes with.
3. Control a monitor with its Hotkey Puck G3.
Custom Key >
IR Channel Setting >
Channel 1
When there is only one Hotkey Puck G3
1. Set one monitor to a channel from System > IR Channel Setting.
2. Switch to the corresponding channel from the Hotkey Puck G3 when you want to
control a monitor set to it.
Custom Key >
IR Channel Setting >
Channel 2
44
Custom Key >
IR Channel Setting >
Channel 3