BenQ DesignVue PD Series User Manual page 13

Cleaning the LCD screen
Please follow these safety instructions for best performance, and long life for your monitor.
As your monitor panel comes with a special anti-glare coating, use and clean the monitor
carefully.
• Stains on the monitor screen could be obvious. Be cautious when you use or clean the
monitor and avoid getting oil or dust on the screen.
• Fingerprints and dust under normal use could be wiped away by a microfiber cleaning
cloth.
• Clean the screen surface gently and carefully. Hard scrubbing could damage the screen
coating.
Be sure to follow the instructions to clean the screen surface appropriately.
Using a microfiber cleaning cloth (recommended)
You are recommended to use a microfiber cleaning cloth to clean your monitor screen. It is
an eco-friendly design as it is reusable, washable, and liquid-free.
1. Unplug the monitor from the power outlet before cleaning.
2. Make sure there is no sharp debris on the cleaning cloth to avoid scratching the screen.
3. Hold the edge of the monitor and avoid excessive force on the screen.
4. Make sure the cleaning cloth is clean and dry. Start with a small, clean part of the cloth
and wipe the stained area of the screen gently in circles. If it is still not clean, continue
with another clean part of the cloth to avoid spreading the grease around. If both sides
of the cloth are used and get dirty, wash and dry the cloth properly.
To prevent the seams around the cleaning cloth from marring the screen surface, avoid wiping the screen
with the edge of the cleaning cloth.
5. If necessary, apply a small drop of alcohol-free screen cleaner on a small, clean part of
the cleaning cloth, and wipe the stained area gently in circles. See
cleaner on page 14 for more information.
13
Using a screen