Subscribe to Our Youtube Channel
Related Manuals for RainPoint HTV113FRF
Summary of Contents for RainPoint HTV113FRF
- Page 1 USER MANUAL 1-Zone Smart Hose Timer Model No. HTV113FRF Welcome to the RAINPOINT family! Please read the manual before use to learn about the features and functions.
-
Page 2: Table Of Contents
Contents Box Contents Introduction 2.1 Product Overview 2.2 Specifications 2.3 Product Features Connection Installation APP Setting 5.1 Device Home Page 5.2 Basic Settings 5.3 Plan Setting 5.4 Charts 5.5 Manual Smart Page Troubleshooting Precautions Warranty Policy FCC Statement Customer Support... -
Page 3: Box Contents
1. Box Contents 1 X HTV113FRF 1-Zone Smart Hose Timer 1 X User Manual 1 X Sealing Tape 1 X Warranty Card -01-... -
Page 4: Introduction
2. Introduction 2.1 Product Overview Operation Button Battery Compartment 2.2 Specifications Range: 197 ft.(60 m) to hub, without interference. WiFi: 2.4GHz Only Waterproof Level: lP54 Pressure Operating Range: 7~116psi (0.5~8 bar) Flow Rate Range: 1.32~9.25 gal/min (5~35 L/min) Watering Duration: 1min~12hrs Temperature Operating Range: 37°F~122°F (3°C~50°C) 4 AA batteries required (Not included) -02-... -
Page 5: Product Features
Tips: Not For Use With Appliances. Do Not Mix Alkaline, Standard (Carbon-Zinc), or Rechargeable (Nickel Cadmium) Batteries. Used up or dead batteries must be removed from the timer and disposed of properly. For Outdoor Use With Cold Water Only. 2.3 Product Features WiFi remote controlled Built-in flow meter with leak alert APP real-time water flow rate display... -
Page 6: Connection
3. Connection Tips: Scan the QR code or search the URL below to watch the video which will guide you through the basics, from setting up your hose timer to using unique features. Video Address: https://bit.ly/4gupLns Pair timer with hub In order to remote control and manage irrigation plans, this timer needs to be paired with hub. - Page 7 Select the category "Controller" on the left and then find model "HTV113FRF", or press on the top right corner to scan product QR code and enter pairing below. Scan to connect 0220113300 -05-...
- Page 8 Tap Next and move onto Pairing page. -06-...
- Page 9 Insert 4 new AA batteries (NOT Included). And press and hold the Operation Button for 5 seconds until the indicator flashes red quickly. Then the timer will start pairing automatically. flash red quickly Tips: Make sure your hub and timer stay close together during pairing. If at any time you need to re-pair or do a factory reset, press and hold the Operation Button until the red indicator light flashes quickly to activate pairing mode manually.
-
Page 10: Installation
4. Installation NOTE: Install your Smart Hose Timer as vertically to the ground as possible. Avoid material fatigue caused by horizontal or angled connections. For better signal connection with the Wi-Fi hub, please do not place the timer in an underground valve box. -08-... -
Page 11: App Setting
Setting: Basic settings for the hose timer Next Plan Time & Last Water Usage Soil temperature & Moisture: Display soil data if you add a paired RainPoint WiFi Soil Meter Plan: Create and manage watering plans Manual: Manual watering in Irrigation, Interval(Misting), Cycle & Soak mode... -
Page 12: Basic Settings
12 hrs as desired for irrigation duration and frequency based on Select Soil Sensor your local climate data Choose RainPoint smart soil sensor you would like to connect Device Replacement to the timer Replace the timer with a new... - Page 13 Tips: After enabling Intelligent Plan, the recommended values will be displayed as shown below. -11-...
-
Page 14: Plan Setting
5.3 Plan Setting Select Plan and start to create a new auto-watering plan. Rain Delay The timer will skip Add a new irrigation all plans during the plan selected period (24/48/72 hrs) to prevent overwa- Timetable overview tering. Apply on of all plans for the rainy days or other next 3 years... - Page 15 Watering Mode Select an irrigation mode, lrrigation/ Interval/Cycle & Stop Watering by Soak Select a way to stop watering, Duration or Water Start Time Usage Set the time that the plan starts Repeat Set the watering frequency for your plan Duration Set a watering duration for the...
-
Page 16: Charts
5.4 Charts Select Charts to review your timer’s daily or monthly water usage. 5.5 Manual 5.5.1 lrrigation Select lrrigation on Device Home Page to manually start a temporary plan with a settable time. 5.5.2 Interval (Misting) Select Interval to manually start a temporary misting plan. Set a specific set of short interval valve opening and closing times to achieve intermittent water spraying. -
Page 17: Smart Page
6. Smart Page Set up customized Smart Scenes according to your preferences and needs to build RainPoint's device IoT system. In this way, your hose timer will automatically adjust watering plans and send various notifications based on the plants' environment. - Page 18 Tips: Smart Scene Operation logic: "If" selected condition is triggered, "Then" execute the specified task. Up to 5 conditions and 5 tasks can be added. In Time condition pane, Execution Time can be set to the sunrise/sun- set time at your location (based on in-app weather forecast). Conditions Trigger Relationship Setting: Touch the icon below If.
-
Page 19: Troubleshooting
7. Troubleshooting Problem Possible Factors Some Solutions Can't turn Low battery. Replace new batteries. on/off the Impurities in water Regularly clean the filter valve inlet. port of impurities to Unstable network or avoid disruptions in use. delayed response. Wait a while and try again. Inaccurate Inaccurate statistics The water timer needs to... - Page 20 Problem Possible Factors Some Solutions Hub can't Not using 2.4GHz Confirm 2.4GHz WiFi connect WiFi. connection. Incorrect WiFi Confirm that the WiFi password. password you entered is Distance between correct. sensor and hub is too Stay closer to the hub far.
-
Page 21: Precautions
Please clean filters regularly and replace if it is worn in order to prolong working life of timer. 9. Warranty Policy RainPoint provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. -19-... -
Page 22: Fcc Statement
10. FCC Statement (FCC ID: 2AWDBHTV113FRF) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. FCC Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. -
Page 23: Customer Support
11. Customer Support Please subscribe to our channel: RainPoint on YouTube for tutorial videos. Or scan the QR code to visit the RainPoint channel on YouTube. If the app and the user manual don’t have what you’re looking for, and need some help about RainPoint, please contact us by LOT NO.: XXXXXX (on the back of the device) -
Page 24: Need Help
Need Help ? Scan the QR code for more help. or Email： support@rainpointonline.com...
Need help?
Do you have a question about the HTV113FRF and is the answer not in the manual?
Questions and answers
the water unit is flashing 3 red lights