Beef Eater 7000 Series Assembly And Operating Instructions Manual
Hide thumbs
Also See for 7000 Series:
- Assembly and operating instructions manual (76 pages) ,
- Assembly and operation instructions manual (24 pages)
Subscribe to Our Youtube Channel
Related Manuals for Beef Eater 7000 Series
Summary of Contents for Beef Eater 7000 Series
- Page 1 7000 SERIES Assembly and Operating Instructions Bulit-in BBG7640SA,BBG7650SA BBF7645SA,BBF7655SA Mobile BMF7645SA,BMF7655SA BMG7642SA,BMG7652SA EUROPE FOR OUTDOOR USE ONLY...
-
Page 2: Table Of Contents
CONGRATULATIONS CONTENTS IMPORTANT SAFETY INSTRUCTIONS • Do not test for leaks with a naked flame Please read the user manuals carefully and store in a Dear Customer, • Do not modify the construction of this appliance or Important safety instructions............3 handy place for later reference. -
Page 3: Product Description
BMF7645SA PRODUCT DESCRIPTION BMF7645SA PRODUCT DIMENSIONS BMF7645SA Warming rack x2 Foil box holder x1 Right reinforcing plate x1 Gas cylinder holder slider assy x1 Cooking grill x2 Drip tray x 1 Trolley mid panel assy x1 Trolley bottom panel x1 Cooking plate x1 Trolley back panel x1 Transformer x1... - Page 4 BMF7655SA PRODUCT DESCRIPTION BMF7655SA PRODUCT DIMENSIONS BMF7655SA Warming rack x 2 Foil box holder x 1 Right reinforcing plate x1 Gas cylinder hold slider assy x 1 Cooking grill x2 Drip tray x1 Trolley mid panel assy x1 Trolley bottom panel Cooking plate x1 Trolley back panel x1 Transformer x1...
- Page 5 BMG7642SA PRODUCT DESCRIPTION BMG7642SA PRODUCT DIMENSIONS BMG7642SA Warming rack x2 Oil foil box x4 Trolley right panel Door handle assy x2 assy x1 Cooking grill x2 Foil box holder x1 Door magnet x1 Door fixing stator x2 Cooking plate x1 Drip tray x1 Door magnet stator x1 Trolley middle frame x1...
- Page 6 BMG7652SA PRODUCT DESCRIPTION BMG7652SA PRODUCT DIMENSIONS BMG7652SA Warming rack x2 Oil foil box x4 Trolley right panel assy x1 Door magnet x1 Cooking grill x2 Foil box holder x1 Door fixing stator x2 Door magnet stator x1 Cooking plate x1 Drip tray x1 Trolley middle frame x1 Trolley bottom panel x1...
-
Page 7: Gas Specifications
ASSEMBLY B M F 7 6 4 5 S A & B M F 7 6 5 5 S A Universal LPG Country BMG7642SA 0.98/0.84 ( BBG7640SA) Category Type BMF7645SA Injector BG,CY,DK,E BMG7652SA 0.98/0.84 orifice diameter - ( BBG7650SA) barbecue burner E,FI,HR,HU,I BMF7655SA I3 B/P... -
Page 8: Bmf7645Sa & Bmf7655Sa Assembly
BMF7645SA & BMF7655SA ASSEMBLY Attach 4 castors x 16 The hole is at the back M6 x 12mm M6 x 12mm Castor with locks at the front position M4 x 10mm M4 x 10mm The transformaer is supplied in the BBQ ASSEMBLING THE BARBECUE ASSEMBLING THE BARBECUE... - Page 9 BMF7645SA & BMF7655SA ASSEMBLY M6 x 12mm M6 x 12mm M6 x 12mm ASSEMBLING THE BARBECUE ASSEMBLING THE BARBECUE...
- Page 10 BMF7645SA & BMF7655SA ASSEMBLY M6 x 12mm M6 x 12mm M4 x 10mm ASSEMBLING THE BARBECUE ASSEMBLING THE BARBECUE...
- Page 11 BMF7645SA & BMF7655SA ASSEMBLY M6 x 12mm M4 x 10mm ASSEMBLING THE BARBECUE ASSEMBLING THE BARBECUE...
- Page 12 BMF7645SA & BMF7655SA ASSEMBLY Assemble the front door Firstly, insert the upper and lower hook into the slots Then press down, when a “pop” is heard, the assembly is in place When connected, When the hinge the upper and lower installed, turn two tabs should be this screw in...
- Page 13 BMF7645SA & BMF7655SA ASSEMBLY Recommend at least 2 people to lift. Due to the assembled body being a heavy lift Insert the wires into the trolley to hide the wires Assemble the transformer wires and the lighting wires, screw the connection to seal.
- Page 14 BMF7645SA & BMF7655SA ASSEMBLY M6 x 12mm Remove these x2 screws before M6 x 12mm assembling the side table and side burner, they are refitted in step 30 ASSEMBLING THE BARBECUE ASSEMBLING THE BARBECUE...
- Page 15 BMF7645SA & BMF7655SA ASSEMBLY M6 x 12mm Assemble side burner gas pipe to the manifold using 18mm and 19mm spanner Connect the wires underneath the side M6 x 12mm burner ASSEMBLING THE BARBECUE ASSEMBLING THE BARBECUE...
- Page 16 BMF7645SA & BMF7655SA ASSEMBLY Locate the flame Locate the warming rack tamers: 2 flame tamers for 4 burners 3 flame tamers for 5 burners Sliding locked Drainage holes are at the front Sliding unlocked ASSEMBLING THE BARBECUE ASSEMBLING THE BARBECUE...
- Page 17 BMF7645SA & BMF7655SA ASSEMBLY Reconect the hose assembly that was removed at step 20. Spanner 19mm Remove the oil tray for easy access to the gas connections. Spanner 18mm ASSEMBLING THE BARBECUE ASSEMBLING THE BARBECUE...
- Page 18 BMF7645SA & BMF7655SA ASSEMBLY Turn to lock the gas bottle tray Push down “ON” to brake Push down “OFF” to move When moving the BBQ, it is necessary to raise the leveling foot, at the same time, ensure that it does not touch the fixed plate above, so as to avoid affecting the rotation of the wheels Leak test procedure...
-
Page 19: Bmg7642Sa & Bmg7652Sa Assembly
BMG7642SA & BMG7652SA ASSEMBLY BMG7642SA Attach 4 castors BMG7625SA x 16 M6 x 12mm The hole is at the back Castor with locks at the front position Castor with locks at the front position For BMG7642SA & BMG7652SA M4 x 10mm M6 x 12mm M4 x 10mm M4 x 10mm... - Page 20 BMG7642SA & BMG7652SA ASSEMBLY Assemble the back trolley panels with M6 Assemble M6 head screw x6 , three on each side on head screws x7 the trolley bottom panel, do not fully tighten. M6 x 12mm M6 x 12mm Assemble left and the right side panels into the keyholes then tighten screws ASSEMBLING THE BARBECUE ASSEMBLING THE BARBECUE...
- Page 21 BMG7642SA & BMG7652SA ASSEMBLY M6 x 12mm M6 x 12mm M4 x 10mm M6 x 12mm ASSEMBLING THE BARBECUE ASSEMBLING THE BARBECUE ” B MG7642SA & BMG7652SA ASSEMBLY...
- Page 22 BMG7642SA & BMG7652SA ASSEMBLY Assemble the door handle assy: remove the screws from the handle then assemble the handle to door and fix with screws Spanner Spanner 19mm Disconncet the pipe with gas hose and 18mm regulator assembly from the BBQ inlet connection as shown before place the BBQ on the trolley ASSEMBLING THE BARBECUE...
- Page 23 BMG7642SA & BMG7652SA ASSEMBLY Remove these x2 screws before assembling the side table and side burner, they are refitted in step 30 Align side burner gas pipe through the hole, pull wire through the hole M6 x 12mm ASSEMBLING THE BARBECUE ASSEMBLING THE BARBECUE...
- Page 24 BMG7642SA & BMG7652SA ASSEMBLY M6 x 12mm M6 x 12mm M6 x 12mm ASSEMBLING THE BARBECUE ASSEMBLING THE BARBECUE...
- Page 25 BMG7642SA & BMG7652SA ASSEMBLY Sliding locked Drip hole should be Sliding unlocked at front side ASSEMBLING THE BARBECUE ASSEMBLING THE BARBECUE...
- Page 26 BMG7642SA& BMG7652SA ASSEMBLY Put the foil oil tray into the holder Reconect the hose assembly that was removed at step 20. Put on the foil box holder onto the drip tray Spanner 19mm Spanner 18mm Remove the oil tray for easy access to the gas connections.
-
Page 27: Natural Gas Installation
BMG7642SA & BMG7652SA ASSEMBLY NATURAL GAS INSTALLATION Take out the warming rack, cooking plate and cooking grill Push down “ON” to brake Push down “OFF” to move Disassemble the R latch When moving the BBQ, it is necessary to raise the leveling foot, at the same time, ensure that it does not touch the fixed plate above, so as to avoid affecting the rotation of the wheels. - Page 28 NATURAL GAS INSTALLATION Take out the burners Unscrew the 6 M4 head screws from the rear burner cover Take out the front baffle Change the injector size for the NG Version plate and the rear burner cover NATURAL GAS INSTALLATION NATURAL GAS INSTALLATION...
- Page 29 NATURAL GAS INSTALLATION Change the injector size Disassemble the side burner and change the Unscrew the M5 head screws x2 from the side table injector for the NG version NATURAL GAS INSTALLATION NATURAL GAS INSTALLATION...
-
Page 30: Rotisserie Kit Installation
NATURAL GAS INSTALLATION MOUNTING ENCLOSURE GUIDELINES Mounting enclosure dimensions when installed with Beefeater hanging bracket BA55HS 650mm min. 604mm Separation panel 880mm 4 burner 40mm Spanner 1050mm 5 burner gap min. 19mm Spanner 22mm Gas bottle Rear wall/splashback to be venting slots Gas bottle non-combustible material... - Page 31 ASSEMBLING THE BARBECUE Tools required: Fasteners supplied (with hanging bracket kit) Left side bracket Right side bracket The barbecue can be mounted into the enclosure by M6 x 25MM using the BeefEater hanging bracket kit BA55HS or by 8 OFF resting the barbecue directly on its base.
-
Page 32: Installation
INSTALLATION RAIN BAFFLE INSTALLATION Partial Enclosures (Australia Only) BMG7642SA and BMG7652SA This appliance shall only be used in an above ground, open Optional rain baffle can be fitted to air situation with natural ventilation, without stagnant areas, help prevent water getting into the where gas leakage and products of combustion are rapidly oil tray is the BBQ is located dispersed by wind and natural convection. -
Page 33: Side Burner
RAIN BAFFLE INSTALLATION SIDE BURNER OPERATING INSTRUCTIONS BMG7645SA and BMG7655SA Lighting Instructions Do not attempt to light burner with the cooking surfaces covered Read the instructions before lighting To light burner depress knob and rotate to ‘HIGH’ Keep knob pushed in for 5 seconds to ensure flame safety is activated (if fitted) If burner did not light, turn knob to the ‘OFF’... -
Page 34: Installation Warnings
INSTALLATION WARNINGS Secure all joints and leak test WARNING Never use a naked flame to check for gas leaks. The gas 1) - this appliance can be used by children aged from 8 leak testing procedure should be conducted every time a gas cylinder is refilled and reconnected to the appliance, or after years and above and persons with reduced physical, any new gas connection is made. - Page 35 GAS SPECIFICATIONS AND MOBILE RESTRAINT INSTALLATION WARNINGS Before you light the barbecue Lighting the barbecue Controlling The Burners After Use Perform the following checks The same procedure is used to light the main burners as The control knob can now be turned to the desired heat It is a good idea to leave the barbecue on for about 10 well as the side burner: setting, Low, Medium or High.
-
Page 36: Service And Maintenance
OPERATING INSTRUCTIONS GAS SPECIFICATIONS AND MOBILE RESTRAINT CARE AND MAINTENANCE This appliance should be checked and serviced by an Control functions To turn the burners off authorised service person every 2 years to ensure the appliance remains in a safe operating condition. (These Before lighting the barbecue: •... - Page 37 OPERATING INSTRUCTIONS You may find it useful to purchase a meat thermometer to The cleaning and care instructions are essential for the Cleaning the Burners Reposition the grill plates proper functioning and operation of your appliance over time. aviod guess work out of cooking. •...
-
Page 38: Troubleshooting
NOTES TROUBLESHOOTING NOTES PROBLEM CAUSE CHECK Barbecue will not light Ignition system not working Check to see visible spark at starter probe - if no spark is present when control knob is turned then the unit may need to be serviced or replaced. Contact your BeefEater dealer. - Page 39 NOTES NOTES NOTES NOTES NOTES...
-
Page 40: Warranty
NOTES Warranty FOR SALES IN UK & EUROPE APPLIANCE: BEEFEATER 7000 SERIES BBQ This document sets out the terms and conditions of the product 7. Exclusions: You may not make a claim under this warranty unless the warranties for BeefEater 1600 series BBQ. It is an important defect claimed is due to faulty or defective parts or workmanship. - Page 41 For more information on all Beefeater products, or for dimension and installation information, call into your retailer, phone or email our customer care team or visit our website: EUROPE BeefEater Europe PO Box 1238 Cheddar BS27 9AH Tel: +44 (0)1934 743322 Email: sales@beefeatereurope.co.uk web: www.beefeaterbbqeurope.co.uk BeefEater.
Need help?
Do you have a question about the 7000 Series and is the answer not in the manual?
Questions and answers